main
Ray Publish 0.1.0 30774ba

SPC560P50L3CEFAR

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

SPC560P50L3CEFAR from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NMI input Non-maskable interrupt input (input only, slow pad).
2 A[6] bidirectional Port A bit 6, muxed as GPIO[6] (ALT0) or SCK of DSPI_1 (ALT1), with EIRQ[6] on ALT3.
3 D[1] bidirectional Port D bit 1, muxed as GPIO[49] (ALT0), ETC[2] (ALT2), EXT_TRG (ALT3) or CA_RX of FlexRay.
4 A[7] bidirectional Port A bit 7, muxed as GPIO[7] (ALT0) or SOUT of DSPI_1 (ALT1), with EIRQ[7] on ALT3.
5 C[4] bidirectional Port C bit 4, muxed as GPIO[36] (ALT0) or CS0 of DSPI_0 (ALT1), with EIRQ[22] on ALT3.
6 A[8] bidirectional Port A bit 8, muxed as GPIO[8] (ALT0) or SIN of DSPI_1 (ALT3), with EIRQ[8].
7 C[5] bidirectional Port C bit 5, muxed as GPIO[37] (ALT0) or SCK of DSPI_0 (ALT1), with EIRQ[23] on ALT3.
8 A[5] bidirectional Port A bit 5, muxed as GPIO[5] (ALT0) or CS0 of DSPI_1 (ALT1), with EIRQ[5] on ALT3.
9 C[7] bidirectional Port C bit 7, muxed as GPIO[39] (ALT0), A[1] of FlexPWM_0 (ALT2) or SIN of DSPI_0 (ALT3).
10 C[3] bidirectional Port C bit 3, muxed as GPIO[35] (ALT0) or CS1 of DSPI_0 (ALT1), with TXD of LIN_1 and EIRQ[21] on ALT3.
11 VSS_LV_COR0 power_in 1.2 V ground for core logic decoupling; the decoupling capacitor connects to the nearest VDD_LV_COR pin.
12 VDD_LV_COR0 power_in 1.2 V supply for core logic decoupling; the decoupling capacitor connects to the nearest VSS_LV_COR pin.
13 VDD_HV_IO1 power_in Input/output supply voltage, 3.3 V or 5.0 V.
14 VSS_HV_IO1 power_in Input/output ground.
15 D[9] bidirectional Port D bit 9, muxed as GPIO[57] (ALT0), X[0] of FlexPWM_0 (ALT1) or TXD of LIN_1 (ALT2).
16 VDD_HV_OSC power_in Crystal oscillator amplifier supply voltage, 3.3 V or 5.0 V.
17 VSS_HV_OSC power_in Crystal oscillator amplifier ground.
18 XTAL passive Analog output of the oscillator amplifier; needs to be grounded if the oscillator is used in bypass mode.
19 EXTAL input Analog input of the oscillator amplifier when not in bypass mode, or analog clock input when in bypass mode.
20 RESET bidirectional Bidirectional reset with Schmitt trigger characteristics and noise filter.
21 D[8] bidirectional Port D bit 8, muxed as GPIO[56] (ALT0), CS2 of DSPI_1 (ALT1), CS5 (ALT3) or FAULT[3] of FlexPWM_0.
22 D[5] bidirectional Port D bit 5, muxed as GPIO[53] (ALT0), CS3 of DSPI_0 (ALT1), F[0] of FCU_0 (ALT2) or SOUT of DSPI_3 (ALT3).
23 D[6] bidirectional Port D bit 6, muxed as GPIO[54] (ALT0), CS2 of DSPI_0 (ALT1), SCK of DSPI_3 (ALT2) or FAULT[1] of FlexPWM_0 (ALT3).
24 VSS_LV_COR3 power_in 1.2 V ground for on-chip PLL decoupling; the capacitor connects to VDD_LV_COR3.
25 VDD_LV_COR3 power_in 1.2 V supply for on-chip PLL decoupling; the capacitor connects to VSS_LV_COR3.
26 D[7] bidirectional Port D bit 7, muxed as GPIO[55] (ALT0), CS3 of DSPI_1 (ALT1), F[1] of FCU_0 (ALT2) or SIN of DSPI_0 (ALT4).
27 E[1] input Port E bit 1, input only, muxed as GPIO[65] (ALT0) or AN[4] of ADC_0 (ALT3).
28 C[1] input Port C bit 1, input only, muxed as GPIO[33] (ALT0) or AN[2] of ADC_0 (ALT3).
29 B[7] input Port B bit 7, input only, muxed as GPIO[23] (ALT0) or AN[0] of ADC_0 (ALT3).
30 C[2] input Port C bit 2, input only, muxed as GPIO[34] (ALT0) or AN[3] of ADC_0 (ALT3).
31 B[8] input Port B bit 8, input only, muxed as GPIO[24] (ALT0) or AN[1] of ADC_0 (ALT3).
32 E[2] input Port E bit 2, input only, muxed as GPIO[66] (ALT0) or AN[5] of ADC_0 (ALT3).
33 VDD_HV_ADC0 power_in ADC_0 supply and high reference voltage.
34 VSS_HV_ADC0 power_in ADC_0 ground and low reference voltage.
35 B[9] input Port B bit 9, input only, muxed as GPIO[25] (ALT0) or AN[11] of ADC_0/ADC_1 (ALT3).
36 B[10] input Port B bit 10, input only, muxed as GPIO[26] (ALT0) or AN[12] of ADC_0/ADC_1 (ALT3).
37 B[11] input Port B bit 11, input only, muxed as GPIO[27] (ALT0) or AN[13] of ADC_0/ADC_1 (ALT3).
38 B[12] input Port B bit 12, input only, muxed as GPIO[28] (ALT0) or AN[14] of ADC_0/ADC_1 (ALT3).
39 VDD_HV_ADC1 power_in ADC_1 supply and high reference voltage.
40 VSS_HV_ADC1 power_in ADC_1 ground and low reference voltage.
41 D[15] input Port D bit 15, input only, muxed as GPIO[63] (ALT0) or AN[4] of ADC_1 (ALT3).
42 B[13] input Port B bit 13, input only, muxed as GPIO[29] (ALT0), AN[0] of ADC_1 (ALT3) or LIN_1 RXD.
43 B[15] input Port B bit 15, input only, muxed as GPIO[31] (ALT0) or AN[2] of ADC_1 (ALT3).
44 B[14] input Port B bit 14, input only, muxed as GPIO[30] (ALT0) or AN[1] of ADC_1 (ALT3).
45 C[0] input Port C bit 0, input only, muxed as GPIO[32] (ALT0) or AN[3] of ADC_1 (ALT3).
46 E[0] input Port E bit 0, input only, muxed as GPIO[64] (ALT0) or AN[5] of ADC_1 (ALT3).
47 BCTRL passive Voltage regulator external NPN ballast base control pin.
48 VDD_LV_REGCOR power_in 1.2 V decoupling pin for core logic and regulator feedback; the capacitor connects to VSS_LV_REGCOR.
49 VSS_LV_REGCOR power_in 1.2 V ground for core logic and regulator feedback; the capacitor connects to VDD_LV_REGCOR.
50 VDD_HV_REG power_in Voltage regulator supply voltage, 3.3 V or 5.0 V.
51 A[0] bidirectional Port A bit 0, muxed as GPIO[0] (ALT0), ETC[0] (ALT1) or SCK of DSPI_2 (ALT2), with EIRQ[0] on ALT3.
52 A[1] bidirectional Port A bit 1, muxed as GPIO[1] (ALT0), ETC[1] (ALT1) or SOUT of DSPI_2 (ALT2), with EIRQ[1] on ALT3.
53 D[10] bidirectional Port D bit 10, muxed as GPIO[58] (ALT0), A[0] of FlexPWM_0 (ALT1) or CS0 of DSPI_3 (ALT2).
54 D[11] bidirectional Port D bit 11, muxed as GPIO[59] (ALT0), B[0] of FlexPWM_0 (ALT1), CS1 (ALT2) or SCK of DSPI_3 (ALT3).
55 C[11] bidirectional Port C bit 11, muxed as GPIO[43] (ALT0), ETC[4] of eTimer_0 (ALT1), CS2 of DSPI_2 (ALT2) or CS0 of DSPI_3 (ALT3).
56 C[12] bidirectional Port C bit 12, muxed as GPIO[44] (ALT0), ETC[5] of eTimer_0 (ALT1), CS3 of DSPI_2 (ALT2) or CS1 of DSPI_3 (ALT3).
57 A[2] bidirectional Port A bit 2, muxed as GPIO[2] (ALT0), ETC[2] (ALT1), SIN of DSPI_2 (ALT3) or ABS[0] of MC_RGM.
58 TDI input Test Data In (input only, slow pad, medium on SRC=1).
59 TMS bidirectional JTAG state machine control (slow and fast pad configurations).
60 TCK input JTAG clock (input only, slow pad).
61 TDO output Test Data Out (output only, slow pad, fast on SRC=1).
62 VSS_HV_IO2 power_in Input/output ground.
63 VDD_HV_IO2 power_in Input/output supply voltage, 3.3 V or 5.0 V.
64 A[3] bidirectional Port A bit 3, muxed as GPIO[3] (ALT0), ETC[3] (ALT1), CS0 of DSPI_2 (ALT2) or B[3] of FlexPWM_0 (ALT3).
65 VDD_LV_COR1 power_in 1.2 V decoupling pin for core logic; the capacitor connects to the nearest VSS_LV_COR pin.
66 VSS_LV_COR1 power_in 1.2 V ground for core logic; the capacitor connects to the nearest VDD_LV_COR pin.
67 D[13] bidirectional Port D bit 13, muxed as GPIO[61] (ALT0), A[1] of FlexPWM_0 (ALT1), CS2 (ALT2) or SOUT of DSPI_3 (ALT3).
68 VSS_HV_FL power_in Code and data flash supply ground.
69 VDD_HV_FL power_in Code and data flash supply voltage, 3.3 V or 5.0 V.
70 D[12] bidirectional Port D bit 12, muxed as GPIO[60] (ALT0), X[1] of FlexPWM_0 (ALT1) or RXD of LIN_1 (ALT4).
71 C[13] bidirectional Port C bit 13, muxed as GPIO[45] (ALT0), ETC[1] of eTimer_1 (ALT1), EXT_IN (ALT2) or EXT_SYNC (ALT3).
72 C[14] bidirectional Port C bit 14, muxed as GPIO[46] (ALT0), ETC[2] of eTimer_1 (ALT1) or EXT_TGR of CTU_0 (ALT2).
73 D[14] bidirectional Port D bit 14, muxed as GPIO[62] (ALT0), B[1] of FlexPWM_0 (ALT1), CS3 (ALT2) or SIN of DSPI_3 (ALT4).
74 VPP_TEST input Test pin for testing purpose only; to be tied to ground in normal operating mode.
75 A[4] bidirectional Port A bit 4, muxed as GPIO[4] (ALT0), ETC[0] of eTimer_1 (ALT1), CS1 (ALT2) or ETC[4] (ALT3).
76 B[0] bidirectional Port B bit 0, muxed as GPIO[16] (ALT0), TXD of FlexCAN_0 (ALT1) or ETC[2] of eTimer_1 (ALT2).
77 B[1] bidirectional Port B bit 1, muxed as GPIO[17] (ALT0), ETC[3] of eTimer_1 (ALT2) or RXD of FlexCAN_0 (ALT3).
78 C[10] bidirectional Port C bit 10, muxed as GPIO[42] (ALT0), CS2 of DSPI_2 (ALT1), A[3] of FlexPWM_0 (ALT3) or FAULT[1].
79 B[2] bidirectional Port B bit 2, muxed as GPIO[18] (ALT0), TXD of LIN_0 (ALT1) or DEBUG[2] of SSCM (ALT2).
80 B[3] bidirectional Port B bit 3, muxed as GPIO[19] (ALT0), DEBUG[3] of SSCM (ALT2) or RXD of LIN_0 (ALT3).
81 A[10] bidirectional Port A bit 10, muxed as GPIO[10] (ALT0), CS0 of DSPI_2 (ALT1), B[0] of FlexPWM_0 (ALT2) or X[2] of FlexPWM_0 (ALT3).
82 A[11] bidirectional Port A bit 11, muxed as GPIO[11] (ALT0), SCK of DSPI_2 (ALT1), A[0] of FlexPWM_0 (ALT2) or A[2] of FlexPWM_0 (ALT3).
83 A[12] bidirectional Port A bit 12, muxed as GPIO[12] (ALT0), SOUT of DSPI_2 (ALT1), A[2] of FlexPWM_0 (ALT2) or B[2] of FlexPWM_0 (ALT3).
84 C[9] bidirectional Port C bit 9, muxed as GPIO[41] (ALT0), CS3 of DSPI_2 (ALT1), X[3] of FlexPWM_0 (ALT3) or FAULT[2].
85 C[15] bidirectional Port C bit 15, muxed as GPIO[47] (ALT0), CA_TR_EN of FlexRay_0 (ALT1), ETC[0] of eTimer_1 (ALT2) or A[1] of FlexPWM_0 (ALT3); pad is symmetric.
86 D[0] bidirectional Port D bit 0, muxed as GPIO[48] (ALT0), CA_TX of FlexRay_0 (ALT1), ETC[1] of eTimer_1 (ALT2) or B[1] of FlexPWM_0 (ALT3); pad is symmetric.
87 VDD_HV_IO3 power_in Input/output supply voltage, 3.3 V or 5.0 V.
88 VSS_HV_IO3 power_in Input/output ground.
89 D[3] bidirectional Port D bit 3, muxed as GPIO[51] (ALT0), CB_TX of FlexRay_0 (ALT1), ETC[4] of eTimer_1 (ALT2) or A[3] of FlexPWM_0 (ALT3); pad is symmetric.
90 D[4] bidirectional Port D bit 4, muxed as GPIO[52] (ALT0), CB_TR_EN of FlexRay_0 (ALT1), ETC[5] of eTimer_1 (ALT2) or B[3] of FlexPWM_0 (ALT3); pad is symmetric.
91 C[8] bidirectional Port C bit 8, muxed as GPIO[40] (ALT0), CS1 of DSPI_1 (ALT1), CS6 of DSPI_0 (ALT3) or FAULT[2] of FlexPWM_0.
92 VDD_LV_COR2 power_in 1.2 V decoupling pin for core logic; the capacitor connects to the nearest VSS_LV_COR pin.
93 VSS_LV_COR2 power_in 1.2 V ground for core logic; the capacitor connects to the nearest VDD_LV_COR pin.
94 A[9] bidirectional Port A bit 9, muxed as GPIO[9] (ALT0), CS1 of DSPI_2 (ALT1), B[3] (ALT3) or FAULT[0] of FlexPWM_0.
95 A[13] bidirectional Port A bit 13, muxed as GPIO[13] (ALT0), B[2] of FlexPWM_0 (ALT2), SIN of DSPI_2 (ALT3) or FAULT[0] of FlexPWM_0.
96 B[6] bidirectional Port B bit 6, muxed as GPIO[22] (ALT0), CLKOUT of MC_CGL (ALT1), CS2 of DSPI_2 (ALT2) or EIRQ[18] (ALT4).
97 D[2] bidirectional Port D bit 2, muxed as GPIO[50] (ALT0), ETC[3] of eTimer_1 (ALT2), X[3] of FlexPWM_0 (ALT3) or CB_RX of FlexRay_0.
98 C[6] bidirectional Port C bit 6, muxed as GPIO[38] (ALT0), SOUT of DSPI_0 (ALT1), B[1] of FlexPWM_0 (ALT2) or DEBUG[6] of SSCM.
99 A[14] bidirectional Port A bit 14, muxed as GPIO[14] (ALT0), TXD of Safety Port_0 (ALT1) or ETC[4] of eTimer_1 (ALT2), with EIRQ[13] on ALT4.
100 A[15] bidirectional Port A bit 15, muxed as GPIO[15] (ALT0), ETC[5] of eTimer_1 (ALT2), RXD of Safety Port_0 (ALT4) or EIRQ[14].

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Recommended operating conditions, input/output supply voltage (5.0 V) VDD_HV_IOx 4.5 5.5 V 5.0 V input/output supply voltage 53
Recommended operating conditions, code and data flash supply voltage (5.0 V) VDD_HV_FL 4.5 5.5 V 5.0 V code and data flash supply voltage 53
Recommended operating conditions, crystal oscillator amplifier supply voltage (5.0 V) VDD_HV_OSC 4.5 5.5 V 5.0 V crystal oscillator amplifier supply voltage 53
Recommended operating conditions, voltage regulator supply voltage (5.0 V) VDD_HV_REG 4.5 5.5 V 5.0 V voltage regulator supply voltage 53
Recommended operating conditions, ADC_0 supply and high reference voltage (5.0 V) VDD_HV_ADC0 4.5 5.5 V 5.0 V ADC_0 supply and high reference voltage 53
Ambient temperature under bias (5.0 V) TA -40 105 °C fCPU = 64 MHz 53
Ambient temperature under bias (5.0 V) TA -40 125 °C fCPU = 60 MHz 53
Recommended operating conditions, input/output supply voltage (3.3 V) VDD_HV_IOx 3 3.6 V 3.3 V input/output supply voltage 54
Recommended operating conditions, code and data flash supply voltage (3.3 V) VDD_HV_FL 3 3.6 V 3.3 V code and data flash supply voltage 54
Recommended operating conditions, crystal oscillator amplifier supply voltage (3.3 V) VDD_HV_OSC 3 3.6 V 3.3 V crystal oscillator amplifier supply voltage 54
Recommended operating conditions, voltage regulator supply voltage (3.3 V) VDD_HV_REG 3 3.6 V 3.3 V voltage regulator supply voltage 54
Recommended operating conditions, ADC_0 supply and high reference voltage (3.3 V) VDD_HV_ADC0 3 5.5 V 3.3 V ADC_0 supply and high reference voltage 54
Ambient temperature under bias (3.3 V) TA -40 105 °C fCPU = 64 MHz 55
Ambient temperature under bias (3.3 V) TA -40 125 °C fCPU = 60 MHz 55
Absolute maximum input/output supply voltage VDD_HV_IOx -0.3 6 V 3.3 V / 5.0 V input/output supply voltage with respect to ground (VSS) 50
Absolute maximum input/output ground voltage VSS_HV_IOx -0.1 0.1 V Input/output ground voltage with respect to ground (VSS) 50
Absolute maximum code and data flash supply voltage VDD_HV_FL -0.3 6 V 3.3 V / 5.0 V code and data flash supply voltage with respect to ground (VSS) 50
Absolute maximum crystal oscillator amplifier supply voltage VDD_HV_OSC -0.3 6 V 3.3 V / 5.0 V crystal oscillator amplifier supply voltage with respect to ground (VSS) 50
Absolute maximum voltage regulator supply voltage VDD_HV_REG -0.3 6 V 3.3 V / 5.0 V voltage regulator supply voltage with respect to ground (VSS) 50
Absolute maximum ADC_0 supply and high reference voltage VDD_HV_ADC0 6 V VDD_HV_REG > 2.7 V 50
Absolute maximum voltage on any pin VIN -0.3 6 V Voltage on any pin with respect to ground (VSS_HV_IOx) with respect to ground (VSS) 50
Injected input current on any pin during overload IINJPAD -10 10 mA Injected input current on any pin during overload condition 51
Absolute sum of all injected input currents during overload IINJSUM -50 50 mA Absolute sum of all injected input currents during overload condition 51
Low voltage static current sink through VDD_LV IVDD_LV 155 mA Low voltage static current sink through VDD_LV 51
Storage temperature TSTG -55 150 °C Storage temperature 51
Junction temperature under bias TJ -40 150 °C Junction temperature under bias 51
Power-on reset threshold VPORH 1.5 2.7 V 63
I/O 5V low voltage detector high threshold VIOLVDM5OK_H 4.4 V 63
I/O 5V low voltage detector low threshold VIOLVDM5OK_L 3.8 V 63
Digital supply low voltage detector high VMLVDDOK_H 1.145 V 63
Digital supply low voltage detector low VMLVDDOK_L 1.08 V 63
Equivalent pull-up current IPU -130 µA VIN = VIL 66
Equivalent pull-up current IPU -10 µA VIN = VIH 66
Equivalent pull-down current IPD 10 µA VIN = VIL 66
Equivalent pull-down current IPD 130 µA VIN = VIH 66
Input leakage current (all bidirectional ports) IIL -1 1 µA TA = -40 to 125 °C 66
Input capacitance CIN 10 pF 66
Supply current RUN maximum mode, 40 MHz IDD_LV_CORx 62 77 mA VDD_LV_CORx externally forced at 1.3 V, 40 MHz 67
Supply current RUN maximum mode, 64 MHz IDD_LV_CORx 71 88 mA VDD_LV_CORx externally forced at 1.3 V, 64 MHz 67
Supply current HALT mode IDD_LV_CORx 1.5 10 mA VDD_LV_CORx externally forced at 1.3 V 67
Supply current STOP mode IDD_LV_CORx 1 10 mA VDD_LV_CORx externally forced at 1.3 V 67
Oscillator frequency fOSC 4 40 MHz 75
Transconductance (5.0 V) gm 6.5 25 mA/V 75
PLL reference frequency range, crystal reference fref_crystal 4 40 MHz Crystal reference 76
Clock frequency range in normal mode fFMPLLOUT 16 120 MHz 76
Self-clocked mode frequency fSCM 20 150 MHz 76
PLL lock time tlpll 200 µs 77
Frequency LOCK range fLCK -6 6 % fSYS 77
Frequency un-LOCK range fUL -18 18 % fSYS 77
Modulation frequency fMOD 70 kHz 77
Fast internal RC oscillator variation over temperature and supply ΔRCMVAR -5 5 % Fast internal RC oscillator variation over temperature and supply with respect to fRC at TA = 25 °C in high-frequency configuration 78
Input clock duty cycle tDC 47.5 50 52.5 % 76
Frequency in bypass fCLK 64 MHz 76
ADC clock frequency fCK 3 60 MHz ADC clock frequency (depends on ADC configuration) 83
Sampling frequency fs 1.53 MHz 83
Thermal resistance junction-to-ambient, natural convection, single layer board RθJA 47.3 °C/W Single layer board, 1s 57
Thermal resistance junction-to-ambient, natural convection, four layer board RθJA 35.3 °C/W Four layer board, 2s2p 57
Thermal resistance junction-to-board, four layer board RθJB 19.1 °C/W Four layer board, 2s2p 57
Thermal resistance junction-to-case (top) RθJCtop 9.7 °C/W Single layer board, 1s 57

CAD (KiCad official)

  • Symbol: SPC560P50L3CEFAR
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: spc560p50l3cefar-etched.step / spc560p50l3cefar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); spc560p50l3cefar.step / spc560p50l3cefar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (112 pp, sha256 d835583856bd2db4, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF