Generated by kicad-footprint-generator · KiCad file format 20260206
SPC560P50L3CEFAR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
SPC560P50L3CEFAR from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NMI | input | Non-maskable interrupt input (input only, slow pad). |
| 2 | A[6] | bidirectional | Port A bit 6, muxed as GPIO[6] (ALT0) or SCK of DSPI_1 (ALT1), with EIRQ[6] on ALT3. |
| 3 | D[1] | bidirectional | Port D bit 1, muxed as GPIO[49] (ALT0), ETC[2] (ALT2), EXT_TRG (ALT3) or CA_RX of FlexRay. |
| 4 | A[7] | bidirectional | Port A bit 7, muxed as GPIO[7] (ALT0) or SOUT of DSPI_1 (ALT1), with EIRQ[7] on ALT3. |
| 5 | C[4] | bidirectional | Port C bit 4, muxed as GPIO[36] (ALT0) or CS0 of DSPI_0 (ALT1), with EIRQ[22] on ALT3. |
| 6 | A[8] | bidirectional | Port A bit 8, muxed as GPIO[8] (ALT0) or SIN of DSPI_1 (ALT3), with EIRQ[8]. |
| 7 | C[5] | bidirectional | Port C bit 5, muxed as GPIO[37] (ALT0) or SCK of DSPI_0 (ALT1), with EIRQ[23] on ALT3. |
| 8 | A[5] | bidirectional | Port A bit 5, muxed as GPIO[5] (ALT0) or CS0 of DSPI_1 (ALT1), with EIRQ[5] on ALT3. |
| 9 | C[7] | bidirectional | Port C bit 7, muxed as GPIO[39] (ALT0), A[1] of FlexPWM_0 (ALT2) or SIN of DSPI_0 (ALT3). |
| 10 | C[3] | bidirectional | Port C bit 3, muxed as GPIO[35] (ALT0) or CS1 of DSPI_0 (ALT1), with TXD of LIN_1 and EIRQ[21] on ALT3. |
| 11 | VSS_LV_COR0 | power_in | 1.2 V ground for core logic decoupling; the decoupling capacitor connects to the nearest VDD_LV_COR pin. |
| 12 | VDD_LV_COR0 | power_in | 1.2 V supply for core logic decoupling; the decoupling capacitor connects to the nearest VSS_LV_COR pin. |
| 13 | VDD_HV_IO1 | power_in | Input/output supply voltage, 3.3 V or 5.0 V. |
| 14 | VSS_HV_IO1 | power_in | Input/output ground. |
| 15 | D[9] | bidirectional | Port D bit 9, muxed as GPIO[57] (ALT0), X[0] of FlexPWM_0 (ALT1) or TXD of LIN_1 (ALT2). |
| 16 | VDD_HV_OSC | power_in | Crystal oscillator amplifier supply voltage, 3.3 V or 5.0 V. |
| 17 | VSS_HV_OSC | power_in | Crystal oscillator amplifier ground. |
| 18 | XTAL | passive | Analog output of the oscillator amplifier; needs to be grounded if the oscillator is used in bypass mode. |
| 19 | EXTAL | input | Analog input of the oscillator amplifier when not in bypass mode, or analog clock input when in bypass mode. |
| 20 | RESET | bidirectional | Bidirectional reset with Schmitt trigger characteristics and noise filter. |
| 21 | D[8] | bidirectional | Port D bit 8, muxed as GPIO[56] (ALT0), CS2 of DSPI_1 (ALT1), CS5 (ALT3) or FAULT[3] of FlexPWM_0. |
| 22 | D[5] | bidirectional | Port D bit 5, muxed as GPIO[53] (ALT0), CS3 of DSPI_0 (ALT1), F[0] of FCU_0 (ALT2) or SOUT of DSPI_3 (ALT3). |
| 23 | D[6] | bidirectional | Port D bit 6, muxed as GPIO[54] (ALT0), CS2 of DSPI_0 (ALT1), SCK of DSPI_3 (ALT2) or FAULT[1] of FlexPWM_0 (ALT3). |
| 24 | VSS_LV_COR3 | power_in | 1.2 V ground for on-chip PLL decoupling; the capacitor connects to VDD_LV_COR3. |
| 25 | VDD_LV_COR3 | power_in | 1.2 V supply for on-chip PLL decoupling; the capacitor connects to VSS_LV_COR3. |
| 26 | D[7] | bidirectional | Port D bit 7, muxed as GPIO[55] (ALT0), CS3 of DSPI_1 (ALT1), F[1] of FCU_0 (ALT2) or SIN of DSPI_0 (ALT4). |
| 27 | E[1] | input | Port E bit 1, input only, muxed as GPIO[65] (ALT0) or AN[4] of ADC_0 (ALT3). |
| 28 | C[1] | input | Port C bit 1, input only, muxed as GPIO[33] (ALT0) or AN[2] of ADC_0 (ALT3). |
| 29 | B[7] | input | Port B bit 7, input only, muxed as GPIO[23] (ALT0) or AN[0] of ADC_0 (ALT3). |
| 30 | C[2] | input | Port C bit 2, input only, muxed as GPIO[34] (ALT0) or AN[3] of ADC_0 (ALT3). |
| 31 | B[8] | input | Port B bit 8, input only, muxed as GPIO[24] (ALT0) or AN[1] of ADC_0 (ALT3). |
| 32 | E[2] | input | Port E bit 2, input only, muxed as GPIO[66] (ALT0) or AN[5] of ADC_0 (ALT3). |
| 33 | VDD_HV_ADC0 | power_in | ADC_0 supply and high reference voltage. |
| 34 | VSS_HV_ADC0 | power_in | ADC_0 ground and low reference voltage. |
| 35 | B[9] | input | Port B bit 9, input only, muxed as GPIO[25] (ALT0) or AN[11] of ADC_0/ADC_1 (ALT3). |
| 36 | B[10] | input | Port B bit 10, input only, muxed as GPIO[26] (ALT0) or AN[12] of ADC_0/ADC_1 (ALT3). |
| 37 | B[11] | input | Port B bit 11, input only, muxed as GPIO[27] (ALT0) or AN[13] of ADC_0/ADC_1 (ALT3). |
| 38 | B[12] | input | Port B bit 12, input only, muxed as GPIO[28] (ALT0) or AN[14] of ADC_0/ADC_1 (ALT3). |
| 39 | VDD_HV_ADC1 | power_in | ADC_1 supply and high reference voltage. |
| 40 | VSS_HV_ADC1 | power_in | ADC_1 ground and low reference voltage. |
| 41 | D[15] | input | Port D bit 15, input only, muxed as GPIO[63] (ALT0) or AN[4] of ADC_1 (ALT3). |
| 42 | B[13] | input | Port B bit 13, input only, muxed as GPIO[29] (ALT0), AN[0] of ADC_1 (ALT3) or LIN_1 RXD. |
| 43 | B[15] | input | Port B bit 15, input only, muxed as GPIO[31] (ALT0) or AN[2] of ADC_1 (ALT3). |
| 44 | B[14] | input | Port B bit 14, input only, muxed as GPIO[30] (ALT0) or AN[1] of ADC_1 (ALT3). |
| 45 | C[0] | input | Port C bit 0, input only, muxed as GPIO[32] (ALT0) or AN[3] of ADC_1 (ALT3). |
| 46 | E[0] | input | Port E bit 0, input only, muxed as GPIO[64] (ALT0) or AN[5] of ADC_1 (ALT3). |
| 47 | BCTRL | passive | Voltage regulator external NPN ballast base control pin. |
| 48 | VDD_LV_REGCOR | power_in | 1.2 V decoupling pin for core logic and regulator feedback; the capacitor connects to VSS_LV_REGCOR. |
| 49 | VSS_LV_REGCOR | power_in | 1.2 V ground for core logic and regulator feedback; the capacitor connects to VDD_LV_REGCOR. |
| 50 | VDD_HV_REG | power_in | Voltage regulator supply voltage, 3.3 V or 5.0 V. |
| 51 | A[0] | bidirectional | Port A bit 0, muxed as GPIO[0] (ALT0), ETC[0] (ALT1) or SCK of DSPI_2 (ALT2), with EIRQ[0] on ALT3. |
| 52 | A[1] | bidirectional | Port A bit 1, muxed as GPIO[1] (ALT0), ETC[1] (ALT1) or SOUT of DSPI_2 (ALT2), with EIRQ[1] on ALT3. |
| 53 | D[10] | bidirectional | Port D bit 10, muxed as GPIO[58] (ALT0), A[0] of FlexPWM_0 (ALT1) or CS0 of DSPI_3 (ALT2). |
| 54 | D[11] | bidirectional | Port D bit 11, muxed as GPIO[59] (ALT0), B[0] of FlexPWM_0 (ALT1), CS1 (ALT2) or SCK of DSPI_3 (ALT3). |
| 55 | C[11] | bidirectional | Port C bit 11, muxed as GPIO[43] (ALT0), ETC[4] of eTimer_0 (ALT1), CS2 of DSPI_2 (ALT2) or CS0 of DSPI_3 (ALT3). |
| 56 | C[12] | bidirectional | Port C bit 12, muxed as GPIO[44] (ALT0), ETC[5] of eTimer_0 (ALT1), CS3 of DSPI_2 (ALT2) or CS1 of DSPI_3 (ALT3). |
| 57 | A[2] | bidirectional | Port A bit 2, muxed as GPIO[2] (ALT0), ETC[2] (ALT1), SIN of DSPI_2 (ALT3) or ABS[0] of MC_RGM. |
| 58 | TDI | input | Test Data In (input only, slow pad, medium on SRC=1). |
| 59 | TMS | bidirectional | JTAG state machine control (slow and fast pad configurations). |
| 60 | TCK | input | JTAG clock (input only, slow pad). |
| 61 | TDO | output | Test Data Out (output only, slow pad, fast on SRC=1). |
| 62 | VSS_HV_IO2 | power_in | Input/output ground. |
| 63 | VDD_HV_IO2 | power_in | Input/output supply voltage, 3.3 V or 5.0 V. |
| 64 | A[3] | bidirectional | Port A bit 3, muxed as GPIO[3] (ALT0), ETC[3] (ALT1), CS0 of DSPI_2 (ALT2) or B[3] of FlexPWM_0 (ALT3). |
| 65 | VDD_LV_COR1 | power_in | 1.2 V decoupling pin for core logic; the capacitor connects to the nearest VSS_LV_COR pin. |
| 66 | VSS_LV_COR1 | power_in | 1.2 V ground for core logic; the capacitor connects to the nearest VDD_LV_COR pin. |
| 67 | D[13] | bidirectional | Port D bit 13, muxed as GPIO[61] (ALT0), A[1] of FlexPWM_0 (ALT1), CS2 (ALT2) or SOUT of DSPI_3 (ALT3). |
| 68 | VSS_HV_FL | power_in | Code and data flash supply ground. |
| 69 | VDD_HV_FL | power_in | Code and data flash supply voltage, 3.3 V or 5.0 V. |
| 70 | D[12] | bidirectional | Port D bit 12, muxed as GPIO[60] (ALT0), X[1] of FlexPWM_0 (ALT1) or RXD of LIN_1 (ALT4). |
| 71 | C[13] | bidirectional | Port C bit 13, muxed as GPIO[45] (ALT0), ETC[1] of eTimer_1 (ALT1), EXT_IN (ALT2) or EXT_SYNC (ALT3). |
| 72 | C[14] | bidirectional | Port C bit 14, muxed as GPIO[46] (ALT0), ETC[2] of eTimer_1 (ALT1) or EXT_TGR of CTU_0 (ALT2). |
| 73 | D[14] | bidirectional | Port D bit 14, muxed as GPIO[62] (ALT0), B[1] of FlexPWM_0 (ALT1), CS3 (ALT2) or SIN of DSPI_3 (ALT4). |
| 74 | VPP_TEST | input | Test pin for testing purpose only; to be tied to ground in normal operating mode. |
| 75 | A[4] | bidirectional | Port A bit 4, muxed as GPIO[4] (ALT0), ETC[0] of eTimer_1 (ALT1), CS1 (ALT2) or ETC[4] (ALT3). |
| 76 | B[0] | bidirectional | Port B bit 0, muxed as GPIO[16] (ALT0), TXD of FlexCAN_0 (ALT1) or ETC[2] of eTimer_1 (ALT2). |
| 77 | B[1] | bidirectional | Port B bit 1, muxed as GPIO[17] (ALT0), ETC[3] of eTimer_1 (ALT2) or RXD of FlexCAN_0 (ALT3). |
| 78 | C[10] | bidirectional | Port C bit 10, muxed as GPIO[42] (ALT0), CS2 of DSPI_2 (ALT1), A[3] of FlexPWM_0 (ALT3) or FAULT[1]. |
| 79 | B[2] | bidirectional | Port B bit 2, muxed as GPIO[18] (ALT0), TXD of LIN_0 (ALT1) or DEBUG[2] of SSCM (ALT2). |
| 80 | B[3] | bidirectional | Port B bit 3, muxed as GPIO[19] (ALT0), DEBUG[3] of SSCM (ALT2) or RXD of LIN_0 (ALT3). |
| 81 | A[10] | bidirectional | Port A bit 10, muxed as GPIO[10] (ALT0), CS0 of DSPI_2 (ALT1), B[0] of FlexPWM_0 (ALT2) or X[2] of FlexPWM_0 (ALT3). |
| 82 | A[11] | bidirectional | Port A bit 11, muxed as GPIO[11] (ALT0), SCK of DSPI_2 (ALT1), A[0] of FlexPWM_0 (ALT2) or A[2] of FlexPWM_0 (ALT3). |
| 83 | A[12] | bidirectional | Port A bit 12, muxed as GPIO[12] (ALT0), SOUT of DSPI_2 (ALT1), A[2] of FlexPWM_0 (ALT2) or B[2] of FlexPWM_0 (ALT3). |
| 84 | C[9] | bidirectional | Port C bit 9, muxed as GPIO[41] (ALT0), CS3 of DSPI_2 (ALT1), X[3] of FlexPWM_0 (ALT3) or FAULT[2]. |
| 85 | C[15] | bidirectional | Port C bit 15, muxed as GPIO[47] (ALT0), CA_TR_EN of FlexRay_0 (ALT1), ETC[0] of eTimer_1 (ALT2) or A[1] of FlexPWM_0 (ALT3); pad is symmetric. |
| 86 | D[0] | bidirectional | Port D bit 0, muxed as GPIO[48] (ALT0), CA_TX of FlexRay_0 (ALT1), ETC[1] of eTimer_1 (ALT2) or B[1] of FlexPWM_0 (ALT3); pad is symmetric. |
| 87 | VDD_HV_IO3 | power_in | Input/output supply voltage, 3.3 V or 5.0 V. |
| 88 | VSS_HV_IO3 | power_in | Input/output ground. |
| 89 | D[3] | bidirectional | Port D bit 3, muxed as GPIO[51] (ALT0), CB_TX of FlexRay_0 (ALT1), ETC[4] of eTimer_1 (ALT2) or A[3] of FlexPWM_0 (ALT3); pad is symmetric. |
| 90 | D[4] | bidirectional | Port D bit 4, muxed as GPIO[52] (ALT0), CB_TR_EN of FlexRay_0 (ALT1), ETC[5] of eTimer_1 (ALT2) or B[3] of FlexPWM_0 (ALT3); pad is symmetric. |
| 91 | C[8] | bidirectional | Port C bit 8, muxed as GPIO[40] (ALT0), CS1 of DSPI_1 (ALT1), CS6 of DSPI_0 (ALT3) or FAULT[2] of FlexPWM_0. |
| 92 | VDD_LV_COR2 | power_in | 1.2 V decoupling pin for core logic; the capacitor connects to the nearest VSS_LV_COR pin. |
| 93 | VSS_LV_COR2 | power_in | 1.2 V ground for core logic; the capacitor connects to the nearest VDD_LV_COR pin. |
| 94 | A[9] | bidirectional | Port A bit 9, muxed as GPIO[9] (ALT0), CS1 of DSPI_2 (ALT1), B[3] (ALT3) or FAULT[0] of FlexPWM_0. |
| 95 | A[13] | bidirectional | Port A bit 13, muxed as GPIO[13] (ALT0), B[2] of FlexPWM_0 (ALT2), SIN of DSPI_2 (ALT3) or FAULT[0] of FlexPWM_0. |
| 96 | B[6] | bidirectional | Port B bit 6, muxed as GPIO[22] (ALT0), CLKOUT of MC_CGL (ALT1), CS2 of DSPI_2 (ALT2) or EIRQ[18] (ALT4). |
| 97 | D[2] | bidirectional | Port D bit 2, muxed as GPIO[50] (ALT0), ETC[3] of eTimer_1 (ALT2), X[3] of FlexPWM_0 (ALT3) or CB_RX of FlexRay_0. |
| 98 | C[6] | bidirectional | Port C bit 6, muxed as GPIO[38] (ALT0), SOUT of DSPI_0 (ALT1), B[1] of FlexPWM_0 (ALT2) or DEBUG[6] of SSCM. |
| 99 | A[14] | bidirectional | Port A bit 14, muxed as GPIO[14] (ALT0), TXD of Safety Port_0 (ALT1) or ETC[4] of eTimer_1 (ALT2), with EIRQ[13] on ALT4. |
| 100 | A[15] | bidirectional | Port A bit 15, muxed as GPIO[15] (ALT0), ETC[5] of eTimer_1 (ALT2), RXD of Safety Port_0 (ALT4) or EIRQ[14]. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Recommended operating conditions, input/output supply voltage (5.0 V) | VDD_HV_IOx | 4.5 | 5.5 | V | 5.0 V input/output supply voltage | 53 | |
| Recommended operating conditions, code and data flash supply voltage (5.0 V) | VDD_HV_FL | 4.5 | 5.5 | V | 5.0 V code and data flash supply voltage | 53 | |
| Recommended operating conditions, crystal oscillator amplifier supply voltage (5.0 V) | VDD_HV_OSC | 4.5 | 5.5 | V | 5.0 V crystal oscillator amplifier supply voltage | 53 | |
| Recommended operating conditions, voltage regulator supply voltage (5.0 V) | VDD_HV_REG | 4.5 | 5.5 | V | 5.0 V voltage regulator supply voltage | 53 | |
| Recommended operating conditions, ADC_0 supply and high reference voltage (5.0 V) | VDD_HV_ADC0 | 4.5 | 5.5 | V | 5.0 V ADC_0 supply and high reference voltage | 53 | |
| Ambient temperature under bias (5.0 V) | TA | -40 | 105 | °C | fCPU = 64 MHz | 53 | |
| Ambient temperature under bias (5.0 V) | TA | -40 | 125 | °C | fCPU = 60 MHz | 53 | |
| Recommended operating conditions, input/output supply voltage (3.3 V) | VDD_HV_IOx | 3 | 3.6 | V | 3.3 V input/output supply voltage | 54 | |
| Recommended operating conditions, code and data flash supply voltage (3.3 V) | VDD_HV_FL | 3 | 3.6 | V | 3.3 V code and data flash supply voltage | 54 | |
| Recommended operating conditions, crystal oscillator amplifier supply voltage (3.3 V) | VDD_HV_OSC | 3 | 3.6 | V | 3.3 V crystal oscillator amplifier supply voltage | 54 | |
| Recommended operating conditions, voltage regulator supply voltage (3.3 V) | VDD_HV_REG | 3 | 3.6 | V | 3.3 V voltage regulator supply voltage | 54 | |
| Recommended operating conditions, ADC_0 supply and high reference voltage (3.3 V) | VDD_HV_ADC0 | 3 | 5.5 | V | 3.3 V ADC_0 supply and high reference voltage | 54 | |
| Ambient temperature under bias (3.3 V) | TA | -40 | 105 | °C | fCPU = 64 MHz | 55 | |
| Ambient temperature under bias (3.3 V) | TA | -40 | 125 | °C | fCPU = 60 MHz | 55 | |
| Absolute maximum input/output supply voltage | VDD_HV_IOx | -0.3 | 6 | V | 3.3 V / 5.0 V input/output supply voltage with respect to ground (VSS) | 50 | |
| Absolute maximum input/output ground voltage | VSS_HV_IOx | -0.1 | 0.1 | V | Input/output ground voltage with respect to ground (VSS) | 50 | |
| Absolute maximum code and data flash supply voltage | VDD_HV_FL | -0.3 | 6 | V | 3.3 V / 5.0 V code and data flash supply voltage with respect to ground (VSS) | 50 | |
| Absolute maximum crystal oscillator amplifier supply voltage | VDD_HV_OSC | -0.3 | 6 | V | 3.3 V / 5.0 V crystal oscillator amplifier supply voltage with respect to ground (VSS) | 50 | |
| Absolute maximum voltage regulator supply voltage | VDD_HV_REG | -0.3 | 6 | V | 3.3 V / 5.0 V voltage regulator supply voltage with respect to ground (VSS) | 50 | |
| Absolute maximum ADC_0 supply and high reference voltage | VDD_HV_ADC0 | 6 | V | VDD_HV_REG > 2.7 V | 50 | ||
| Absolute maximum voltage on any pin | VIN | -0.3 | 6 | V | Voltage on any pin with respect to ground (VSS_HV_IOx) with respect to ground (VSS) | 50 | |
| Injected input current on any pin during overload | IINJPAD | -10 | 10 | mA | Injected input current on any pin during overload condition | 51 | |
| Absolute sum of all injected input currents during overload | IINJSUM | -50 | 50 | mA | Absolute sum of all injected input currents during overload condition | 51 | |
| Low voltage static current sink through VDD_LV | IVDD_LV | 155 | mA | Low voltage static current sink through VDD_LV | 51 | ||
| Storage temperature | TSTG | -55 | 150 | °C | Storage temperature | 51 | |
| Junction temperature under bias | TJ | -40 | 150 | °C | Junction temperature under bias | 51 | |
| Power-on reset threshold | VPORH | 1.5 | 2.7 | V | 63 | ||
| I/O 5V low voltage detector high threshold | VIOLVDM5OK_H | 4.4 | V | 63 | |||
| I/O 5V low voltage detector low threshold | VIOLVDM5OK_L | 3.8 | V | 63 | |||
| Digital supply low voltage detector high | VMLVDDOK_H | 1.145 | V | 63 | |||
| Digital supply low voltage detector low | VMLVDDOK_L | 1.08 | V | 63 | |||
| Equivalent pull-up current | IPU | -130 | µA | VIN = VIL | 66 | ||
| Equivalent pull-up current | IPU | -10 | µA | VIN = VIH | 66 | ||
| Equivalent pull-down current | IPD | 10 | µA | VIN = VIL | 66 | ||
| Equivalent pull-down current | IPD | 130 | µA | VIN = VIH | 66 | ||
| Input leakage current (all bidirectional ports) | IIL | -1 | 1 | µA | TA = -40 to 125 °C | 66 | |
| Input capacitance | CIN | 10 | pF | 66 | |||
| Supply current RUN maximum mode, 40 MHz | IDD_LV_CORx | 62 | 77 | mA | VDD_LV_CORx externally forced at 1.3 V, 40 MHz | 67 | |
| Supply current RUN maximum mode, 64 MHz | IDD_LV_CORx | 71 | 88 | mA | VDD_LV_CORx externally forced at 1.3 V, 64 MHz | 67 | |
| Supply current HALT mode | IDD_LV_CORx | 1.5 | 10 | mA | VDD_LV_CORx externally forced at 1.3 V | 67 | |
| Supply current STOP mode | IDD_LV_CORx | 1 | 10 | mA | VDD_LV_CORx externally forced at 1.3 V | 67 | |
| Oscillator frequency | fOSC | 4 | 40 | MHz | 75 | ||
| Transconductance (5.0 V) | gm | 6.5 | 25 | mA/V | 75 | ||
| PLL reference frequency range, crystal reference | fref_crystal | 4 | 40 | MHz | Crystal reference | 76 | |
| Clock frequency range in normal mode | fFMPLLOUT | 16 | 120 | MHz | 76 | ||
| Self-clocked mode frequency | fSCM | 20 | 150 | MHz | 76 | ||
| PLL lock time | tlpll | 200 | µs | 77 | |||
| Frequency LOCK range | fLCK | -6 | 6 | % fSYS | 77 | ||
| Frequency un-LOCK range | fUL | -18 | 18 | % fSYS | 77 | ||
| Modulation frequency | fMOD | 70 | kHz | 77 | |||
| Fast internal RC oscillator variation over temperature and supply | ΔRCMVAR | -5 | 5 | % | Fast internal RC oscillator variation over temperature and supply with respect to fRC at TA = 25 °C in high-frequency configuration | 78 | |
| Input clock duty cycle | tDC | 47.5 | 50 | 52.5 | % | 76 | |
| Frequency in bypass | fCLK | 64 | MHz | 76 | |||
| ADC clock frequency | fCK | 3 | 60 | MHz | ADC clock frequency (depends on ADC configuration) | 83 | |
| Sampling frequency | fs | 1.53 | MHz | 83 | |||
| Thermal resistance junction-to-ambient, natural convection, single layer board | RθJA | 47.3 | °C/W | Single layer board, 1s | 57 | ||
| Thermal resistance junction-to-ambient, natural convection, four layer board | RθJA | 35.3 | °C/W | Four layer board, 2s2p | 57 | ||
| Thermal resistance junction-to-board, four layer board | RθJB | 19.1 | °C/W | Four layer board, 2s2p | 57 | ||
| Thermal resistance junction-to-case (top) | RθJCtop | 9.7 | °C/W | Single layer board, 1s | 57 |
CAD (KiCad official)
- Symbol:
SPC560P50L3CEFAR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
spc560p50l3cefar-etched.step/spc560p50l3cefar-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);spc560p50l3cefar.step/spc560p50l3cefar.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (112 pp, sha256
d835583856bd2db4, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).