main
History Download
Ray Publish 0.1.0 4cbe49d

SP483ECN-L

MaxLinear · RS-485/RS-422 ICs · SOIC-8

SP483ECN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output; it is HIGH when A-B is at or above +0.2V and LOW when A-B is at or below -0.2V, and it is high-impedance when RE is HIGH.
2 RE input Receiver output enable, active LOW; a logic LOW enables the receiver and a logic HIGH disables it.
3 DE input Driver output enable, active HIGH; a logic HIGH enables the driver outputs and a logic LOW tri-states them.
4 DI input Driver input; input high and low thresholds are 2.0V and 0.8V, with input current up to 10µA.
5 GND power_in Ground connection.
6 A bidirectional Non-inverting driver output and receiver input; the receiver common-mode range is -7V to 12V.
7 B bidirectional Inverting driver output and receiver input; the receiver common-mode range is -7V to 12V.
8 VCC power_in Positive supply, specified for 4.75V to 5.25V.

Key specifications

Parameter Value
Manufacturer MaxLinear
Package SOIC-8
Category Communication Interface Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 7 V 2
Logic input voltage -0.3 V Printed max is (VCC + 0.5V), not a number 2
Driver input voltage -0.3 V Printed max is (VCC + 0.5V), not a number 2
Receiver input voltage -15 15 V Printed as ±15V 2
Logic output voltage -0.3 V Printed max is (VCC + 0.5V), not a number 2
Driver output voltage -15 15 V Printed as ±15V 2
Receiver output voltage -0.3 V Printed max is (VCC + 0.5V), not a number 2
Storage temperature -65 150 °C 2
Supply voltage VCC 4.75 5.25 Volts VCC = 5V ±5% 4
Operating temperature, commercial (C) TAMB 0 70 °C Commercial (C) grade; applies to SP483ECN-L 4
Differential output voltage (min) 2 V With load; R = 50Ω (RS-422); Figure 1 2
Differential output voltage (RS-485 load) 1.5 V With load; R = 27Ω (RS-485); Figure 1 2
Change in magnitude of driver differential output voltage for complementary states 0.2 V R = 27Ω or R = 50Ω; Figure 1 2
Driver common-mode output voltage 3 V R = 27Ω or R = 50Ω; Figure 1 2
Input high voltage 2 V Applies to DE, DI, RE 2
Input low voltage 0.8 V Applies to DE, DI, RE 2
Input current, driver input 10 µA Applies to DI 2
Input current, control lines 1 µA Applies to DE, RE 2
Driver short circuit current, VOUT = HIGH -250 250 mA -7V ≤ VO ≤ 12V 2
Driver short circuit current, VOUT = LOW -250 250 mA -7V ≤ VO ≤ 12V 2
Maximum data rate (driver) 250 kbps RE = 5V, DE = 5V; RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver input to output, tPLH tPLH 250 800 2000 ns See Figures 3 & 5, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver input to output, tPHL tPHL 250 800 2000 ns See Figures 3 & 5, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver skew tSKEW 100 800 ns See Figures 3 and 5, tSKEW = /tDPHL - tDPLH/ 3
Driver rise or fall time 250 2000 ns From 10%-90%; RDIFF = 54Ω, CL1 = CL2 = 100pF; See Figures 3 and 6 3
Driver enable to output high 250 2000 ns CL = 100pF, See Figures 4 and 6, S2 closed 3
Driver enable to output low 250 2000 ns CL = 100pF, See Figures 4 and 6, S1 closed 3
Driver disable time from high 300 3000 ns CL = 15pF, See Figures 4 and 6, S2 closed 3
Driver disable time from low 300 3000 ns CL = 15pF, See Figures 4 and 6, S1 closed 3
Differential input threshold -0.2 0.2 Volts -7V ≤ VCM ≤ 12V 3
Output voltage HIGH 3.5 Volts VID = 200mV, IO = -4mA 3
Output voltage LOW 0.4 Volts VID = 200mV, IO = 4mA 3
Three-state (high impedance) output current -1 1 µA 0.4V ≤ VO ≤ 2.4V; RE = 5V 3
Input resistance 12 15 kΩ -7V ≤ VCM ≤ 12V 3
Input current (A, B), VIN = 12V 1 mA DE = 0V, VCC = 0V or 5.25V, VIN = 12V 3
Input current (A, B), VIN = -7V -0.8 mA DE = 0V, VCC = 0V or 5.25V, VIN = -7V 3
Short circuit current 7 95 mA 0V ≤ VO ≤ VCC 3
Maximum data rate (receiver) 250 kbps RE = 0V, DE = 0V 3
Receiver input to output, tPLH tPLH 250 2000 ns See Figures 3 & 7, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Receiver input to output, tPHL tPHL 250 2000 ns See Figures 3 & 7, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Differential receiver skew /tPHL - tPLH/ 100 ns RDIFF = 54Ω, CL1 = CL2 = 100pF, See Figures 3 and 7 3
Receiver enable to output low 45 70 ns CRL = 15pF, Figures 2 & 8; S1 Closed 3
Receiver enable to output high 45 70 ns CRL = 15pF, Figures 2 & 8; S2 Closed 3
Receiver disable from low 45 70 ns CRL = 15pF, Figures 2 & 8; S1 Closed 3
Receiver disable from high 45 70 ns CRL = 15pF, Figures 2 & 8; S2 Closed 3
Time to shutdown 50 200 600 ns RE = 5V, DE = 0V 4
Driver enable from shutdown to output high 2000 ns CL = 100pF; See Figures 4 and 6; S2 Closed 4
Driver enable from shutdown to output low 2000 ns CL = 100pF; See Figures 4 and 6; S1 Closed 4
Receiver enable from shutdown to output high 300 2500 ns CL = 15pF; See Figures 2 and 8; S2 Closed 4
Receiver enable from shutdown to output low 300 2500 ns CL = 15pF; See Figures 2 and 8; S1 Closed 4
Supply current, no load 900 µA RE, DI = 0V or VCC; DE = VCC 4
Supply current, no load 600 µA RE = 0V, DI = 0V or 5V; DE = 0V 4
Supply current, shutdown mode 1 10 µA DE = 0V, RE = VCC 4
Input hysteresis 20 mV VCM = 0V 3

CAD (KiCad official)

  • Symbol: SP483ECN-L
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sp483ecn-l-etched.step / sp483ecn-l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sp483ecn-l.step / sp483ecn-l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (11 pp, sha256 0d6131874ed6a889, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF