Generated by kicad-footprint-generator · KiCad file format 20260206
SP483ECN-L
MaxLinear · RS-485/RS-422 ICs · SOIC-8
SP483ECN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output; it is HIGH when A-B is at or above +0.2V and LOW when A-B is at or below -0.2V, and it is high-impedance when RE is HIGH. |
| 2 | RE | input | Receiver output enable, active LOW; a logic LOW enables the receiver and a logic HIGH disables it. |
| 3 | DE | input | Driver output enable, active HIGH; a logic HIGH enables the driver outputs and a logic LOW tri-states them. |
| 4 | DI | input | Driver input; input high and low thresholds are 2.0V and 0.8V, with input current up to 10µA. |
| 5 | GND | power_in | Ground connection. |
| 6 | A | bidirectional | Non-inverting driver output and receiver input; the receiver common-mode range is -7V to 12V. |
| 7 | B | bidirectional | Inverting driver output and receiver input; the receiver common-mode range is -7V to 12V. |
| 8 | VCC | power_in | Positive supply, specified for 4.75V to 5.25V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOIC-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 7 | V | 2 | |||
| Logic input voltage | -0.3 | V | Printed max is (VCC + 0.5V), not a number | 2 | |||
| Driver input voltage | -0.3 | V | Printed max is (VCC + 0.5V), not a number | 2 | |||
| Receiver input voltage | -15 | 15 | V | Printed as ±15V | 2 | ||
| Logic output voltage | -0.3 | V | Printed max is (VCC + 0.5V), not a number | 2 | |||
| Driver output voltage | -15 | 15 | V | Printed as ±15V | 2 | ||
| Receiver output voltage | -0.3 | V | Printed max is (VCC + 0.5V), not a number | 2 | |||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Supply voltage | VCC | 4.75 | 5.25 | Volts | VCC = 5V ±5% | 4 | |
| Operating temperature, commercial (C) | TAMB | 0 | 70 | °C | Commercial (C) grade; applies to SP483ECN-L | 4 | |
| Differential output voltage (min) | 2 | V | With load; R = 50Ω (RS-422); Figure 1 | 2 | |||
| Differential output voltage (RS-485 load) | 1.5 | V | With load; R = 27Ω (RS-485); Figure 1 | 2 | |||
| Change in magnitude of driver differential output voltage for complementary states | 0.2 | V | R = 27Ω or R = 50Ω; Figure 1 | 2 | |||
| Driver common-mode output voltage | 3 | V | R = 27Ω or R = 50Ω; Figure 1 | 2 | |||
| Input high voltage | 2 | V | Applies to DE, DI, RE | 2 | |||
| Input low voltage | 0.8 | V | Applies to DE, DI, RE | 2 | |||
| Input current, driver input | 10 | µA | Applies to DI | 2 | |||
| Input current, control lines | 1 | µA | Applies to DE, RE | 2 | |||
| Driver short circuit current, VOUT = HIGH | -250 | 250 | mA | -7V ≤ VO ≤ 12V | 2 | ||
| Driver short circuit current, VOUT = LOW | -250 | 250 | mA | -7V ≤ VO ≤ 12V | 2 | ||
| Maximum data rate (driver) | 250 | kbps | RE = 5V, DE = 5V; RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | |||
| Driver input to output, tPLH | tPLH | 250 | 800 | 2000 | ns | See Figures 3 & 5, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Driver input to output, tPHL | tPHL | 250 | 800 | 2000 | ns | See Figures 3 & 5, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Driver skew | tSKEW | 100 | 800 | ns | See Figures 3 and 5, tSKEW = /tDPHL - tDPLH/ | 3 | |
| Driver rise or fall time | 250 | 2000 | ns | From 10%-90%; RDIFF = 54Ω, CL1 = CL2 = 100pF; See Figures 3 and 6 | 3 | ||
| Driver enable to output high | 250 | 2000 | ns | CL = 100pF, See Figures 4 and 6, S2 closed | 3 | ||
| Driver enable to output low | 250 | 2000 | ns | CL = 100pF, See Figures 4 and 6, S1 closed | 3 | ||
| Driver disable time from high | 300 | 3000 | ns | CL = 15pF, See Figures 4 and 6, S2 closed | 3 | ||
| Driver disable time from low | 300 | 3000 | ns | CL = 15pF, See Figures 4 and 6, S1 closed | 3 | ||
| Differential input threshold | -0.2 | 0.2 | Volts | -7V ≤ VCM ≤ 12V | 3 | ||
| Output voltage HIGH | 3.5 | Volts | VID = 200mV, IO = -4mA | 3 | |||
| Output voltage LOW | 0.4 | Volts | VID = 200mV, IO = 4mA | 3 | |||
| Three-state (high impedance) output current | -1 | 1 | µA | 0.4V ≤ VO ≤ 2.4V; RE = 5V | 3 | ||
| Input resistance | 12 | 15 | kΩ | -7V ≤ VCM ≤ 12V | 3 | ||
| Input current (A, B), VIN = 12V | 1 | mA | DE = 0V, VCC = 0V or 5.25V, VIN = 12V | 3 | |||
| Input current (A, B), VIN = -7V | -0.8 | mA | DE = 0V, VCC = 0V or 5.25V, VIN = -7V | 3 | |||
| Short circuit current | 7 | 95 | mA | 0V ≤ VO ≤ VCC | 3 | ||
| Maximum data rate (receiver) | 250 | kbps | RE = 0V, DE = 0V | 3 | |||
| Receiver input to output, tPLH | tPLH | 250 | 2000 | ns | See Figures 3 & 7, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | |
| Receiver input to output, tPHL | tPHL | 250 | 2000 | ns | See Figures 3 & 7, RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | |
| Differential receiver skew | /tPHL - tPLH/ | 100 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF, See Figures 3 and 7 | 3 | ||
| Receiver enable to output low | 45 | 70 | ns | CRL = 15pF, Figures 2 & 8; S1 Closed | 3 | ||
| Receiver enable to output high | 45 | 70 | ns | CRL = 15pF, Figures 2 & 8; S2 Closed | 3 | ||
| Receiver disable from low | 45 | 70 | ns | CRL = 15pF, Figures 2 & 8; S1 Closed | 3 | ||
| Receiver disable from high | 45 | 70 | ns | CRL = 15pF, Figures 2 & 8; S2 Closed | 3 | ||
| Time to shutdown | 50 | 200 | 600 | ns | RE = 5V, DE = 0V | 4 | |
| Driver enable from shutdown to output high | 2000 | ns | CL = 100pF; See Figures 4 and 6; S2 Closed | 4 | |||
| Driver enable from shutdown to output low | 2000 | ns | CL = 100pF; See Figures 4 and 6; S1 Closed | 4 | |||
| Receiver enable from shutdown to output high | 300 | 2500 | ns | CL = 15pF; See Figures 2 and 8; S2 Closed | 4 | ||
| Receiver enable from shutdown to output low | 300 | 2500 | ns | CL = 15pF; See Figures 2 and 8; S1 Closed | 4 | ||
| Supply current, no load | 900 | µA | RE, DI = 0V or VCC; DE = VCC | 4 | |||
| Supply current, no load | 600 | µA | RE = 0V, DI = 0V or 5V; DE = 0V | 4 | |||
| Supply current, shutdown mode | 1 | 10 | µA | DE = 0V, RE = VCC | 4 | ||
| Input hysteresis | 20 | mV | VCM = 0V | 3 |
CAD (KiCad official)
- Symbol:
SP483ECN-L - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sp483ecn-l-etched.step/sp483ecn-l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sp483ecn-l.step/sp483ecn-l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (11 pp, sha256
0d6131874ed6a889, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).