main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sp4082een-l: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
sp4082een-l-etched.glb Publish 0.1.0 · Ray
sp4082een-l-etched.step sp4082een-l: factory component page (tier=lcsc) · Ray
sp4082een-l-hero.glb sp4082een-l: hero GLB from the etched model (keeps the MPN mark) · Ray
sp4082een-l-hero.overlay.json Publish 0.1.0 · Ray
sp4082een-l.glb Publish 0.1.0 · Ray
sp4082een-l.kicad_mod Publish 0.1.0 · Ray
sp4082een-l.kicad_sym Publish 0.1.0 · Ray
sp4082een-l.lbr Publish 0.1.0 · Ray
sp4082een-l.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

SP4082EEN-L

MaxLinear · RS-485/RS-422 ICs · SOIC-8

SP4082EEN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output is high when RE is low and A-B ≥ -40mV, and low when A-B ≤ -200mV.
2 RE input Receiver output enable: when RE is low RO is enabled, and when RE is high RO is high-impedance; driving RE high and DE low enters shutdown.
3 DE input Driver output enable: when DE is high the driver outputs are enabled, and when DE is low they are high-impedance; driving DE low and RE high enters shutdown.
4 DI input Driver input: with DE high, a low on DI forces the non-inverting output low and the inverting output high, and a high on DI forces the reverse; DI input is limited to -0.3V to Vcc+0.3V.
5 GND power_in Ground reference for the device.
6 A bidirectional Non-inverting receiver input and non-inverting driver output on the RS-485 bus, with ±13V absolute maximum voltage and ±15kV Human Body Model ESD protection.
7 B bidirectional Inverting receiver input and inverting driver output on the RS-485 bus, with ±13V absolute maximum voltage and ±15kV Human Body Model ESD protection.
8 Vcc power_in Positive supply, 4.5 V to 5.5 V (recommended); bypass to GND with a 0.1 µF capacitor.

Key specifications

Parameter Value
Manufacturer MaxLinear
Package SOIC-8
Category Communication Interface Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage, Vcc Vcc 4.5 5 5.5 V 3
Input Voltage on A and B pins -7 12 V 3
High-level input voltage (DI, DE or RE) Vih 2 V 3
Low-level input voltage (DI, DE or RE) Vih 0 0.8 V 3
Output Current Driver -60 60 mA 3
Output Current Receiver -8 8 mA 3
Operating Free Air Temperature, Ta Ta -40 85 °C Industrial Grade (E) 3
Supply Voltage (VCC) VCC 7 V 3
Input voltage at control input pins (RE, DE) -0.3 V 3
Driver input voltage (DI) -0.3 V 3
Driver output voltage (A, B, Y, and Z) -13 13 V 3
Receiver output voltage (RO) -0.3 V 3
Receiver input voltage (A, B) -13 13 V 3
Maximum Junction Temperature 150 °C 3
Storage Temperature -65 150 °C 3
Lead Temperature (soldering) 300 °C 10s 3
Logic input threshold High Vih 2 V 4
Logic input threshold Low Vil 0.8 V 4
Logic Input Current -1 1 μA Ta = 25°C, after first transition 4
Input Hysteresis 100 mV Ta = 25°C 4
Differential Driver Output, Test 1 Vod 2 V Rl=100Ω (RS-422) 4
Differential Driver Output, Test 1 Vod 1.5 2.7 V Rl=54Ω (RS-485) 4
Differential Driver Output, Test 2 Vod 1.5 V Vcm = -7 to +12V 4
Change in Magnitude of Differential Output Voltage ΔVod -0.2 0.2 V Rl=54 or 100Ω 4
Driver Common Mode Output Voltage Voc 1 3 V Rl=54 or 100Ω 4
Change in Common Mode Output Voltage ΔVoc -0.2 0.2 V Rl=54 or 100Ω 4
Driver Short Circuit Current Limit -250 250 mA -7V ≤ Vout ≤ +12V 4
Output Leakage Current (high output) 125 μA DE=0, Vout=12V 4
Output Leakage Current (low output) -100 μA RE=0, Vcc=0 or 5.5V, Vout= -7V 4
Receiver Input Resistance 96 kΩ -7V ≤ Vcm ≤ 12V 4
Input Current (A, B pins) 125 μA DE=0, RE=0, Vcc=0 or 5.5V, Vin= 12V 4
Input Current (A, B pins) -100 μA DE=0, RE=0, Vcc=0 or 5.5V, Vin= -7V 4
Receiver Differential Threshold VA-VB -200 -125 -40 mV -7V ≤ Vcm ≤ 12V 4
Receiver Input Hysteresis 25 mV 4
Receiver Output Voltage Low Vol 0.4 V Iout = 8mA, Vid = -200mV 4
High-Z Receiver Output Current -1 1 μA Vcc =5.5V, 0 ≤ Vout ≤ Vcc 4
Receiver Output Short Circuit Current -95 95 mA 0V ≤ Vro≤ Vcc 4
Supply Current, Active Mode IQ 400 900 μA No load, DI=0 or Vcc 4
Supply Current, Shutdown Mode 1 μA DE=0, RE=Vcc, DI=Vcc 4
Thermal Shutdown Temperature 165 °C Junction temperature 4
Thermal Shutdown Hysteresis 15 4
Data Signaling Rate 1 / tUI 115 Kbps Duty Cycle 40 to 60% 5
Driver Propagation Delay tPHL, tPLH 3500 ns RL = 54Ω, CL = 50pF 5
Driver Output Rise/Fall Time tR, tF 667 1200 2500 ns 5
Driver Differential Skew tPLH, tPHL -500 500 ns 5
Driver Enable to Output High tDZH 3500 ns 5
Driver Enable to Output Low tDZL 3500 ns 5
Driver Disable from Output High tDHZ 100 ns 5
Driver Disable from Output Low tDLZ 100 ns 5
Shutdown to Driver Output Valid tDZV 6000 ns 5
Receiver Propagation Delay 250 ns CL = 15pF, VID = ±2V 5
Receiver Propagation Delay Skew tPLH, tPHL -50 50 ns 5
Receiver Output Rise/Fall Time tR, tF 50 ns CL = 15pF 5
Receiver Enable to Output High tZH 100 ns 5
Receiver Enable to Output Low tZL 100 ns 5
Receiver Disable from Output High tHZ 100 ns 5
Receiver Disable from Output Low tLZ 100 ns 5
Shutdown to Receiver Output Valid tROV 3500 ns 5
Time to Shutdown 50 600 ns Note 2,3 5
Thermal Resistance, 8-Pin SO Øja 128.4 °C/W 8-Pin SO 3

CAD (KiCad official)

  • Symbol: SP4082EEN-L
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sp4082een-l-etched.step / sp4082een-l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sp4082een-l.step / sp4082een-l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (14 pp, sha256 732751bcd7ee688d, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF