3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSP4082EEN-L
MaxLinear · RS-485/RS-422 ICs · SOIC-8
SP4082EEN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output is high when RE is low and A-B ≥ -40mV, and low when A-B ≤ -200mV. |
| 2 | RE | input | Receiver output enable: when RE is low RO is enabled, and when RE is high RO is high-impedance; driving RE high and DE low enters shutdown. |
| 3 | DE | input | Driver output enable: when DE is high the driver outputs are enabled, and when DE is low they are high-impedance; driving DE low and RE high enters shutdown. |
| 4 | DI | input | Driver input: with DE high, a low on DI forces the non-inverting output low and the inverting output high, and a high on DI forces the reverse; DI input is limited to -0.3V to Vcc+0.3V. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Non-inverting receiver input and non-inverting driver output on the RS-485 bus, with ±13V absolute maximum voltage and ±15kV Human Body Model ESD protection. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output on the RS-485 bus, with ±13V absolute maximum voltage and ±15kV Human Body Model ESD protection. |
| 8 | Vcc | power_in | Positive supply, 4.5 V to 5.5 V (recommended); bypass to GND with a 0.1 µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOIC-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, Vcc | Vcc | 4.5 | 5 | 5.5 | V | 3 | |
| Input Voltage on A and B pins | -7 | 12 | V | 3 | |||
| High-level input voltage (DI, DE or RE) | Vih | 2 | V | 3 | |||
| Low-level input voltage (DI, DE or RE) | Vih | 0 | 0.8 | V | 3 | ||
| Output Current Driver | -60 | 60 | mA | 3 | |||
| Output Current Receiver | -8 | 8 | mA | 3 | |||
| Operating Free Air Temperature, Ta | Ta | -40 | 85 | °C | Industrial Grade (E) | 3 | |
| Supply Voltage (VCC) | VCC | 7 | V | 3 | |||
| Input voltage at control input pins (RE, DE) | -0.3 | V | 3 | ||||
| Driver input voltage (DI) | -0.3 | V | 3 | ||||
| Driver output voltage (A, B, Y, and Z) | -13 | 13 | V | 3 | |||
| Receiver output voltage (RO) | -0.3 | V | 3 | ||||
| Receiver input voltage (A, B) | -13 | 13 | V | 3 | |||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Lead Temperature (soldering) | 300 | °C | 10s | 3 | |||
| Logic input threshold High | Vih | 2 | V | 4 | |||
| Logic input threshold Low | Vil | 0.8 | V | 4 | |||
| Logic Input Current | -1 | 1 | μA | Ta = 25°C, after first transition | 4 | ||
| Input Hysteresis | 100 | mV | Ta = 25°C | 4 | |||
| Differential Driver Output, Test 1 | Vod | 2 | V | Rl=100Ω (RS-422) | 4 | ||
| Differential Driver Output, Test 1 | Vod | 1.5 | 2.7 | V | Rl=54Ω (RS-485) | 4 | |
| Differential Driver Output, Test 2 | Vod | 1.5 | V | Vcm = -7 to +12V | 4 | ||
| Change in Magnitude of Differential Output Voltage | ΔVod | -0.2 | 0.2 | V | Rl=54 or 100Ω | 4 | |
| Driver Common Mode Output Voltage | Voc | 1 | 3 | V | Rl=54 or 100Ω | 4 | |
| Change in Common Mode Output Voltage | ΔVoc | -0.2 | 0.2 | V | Rl=54 or 100Ω | 4 | |
| Driver Short Circuit Current Limit | -250 | 250 | mA | -7V ≤ Vout ≤ +12V | 4 | ||
| Output Leakage Current (high output) | 125 | μA | DE=0, Vout=12V | 4 | |||
| Output Leakage Current (low output) | -100 | μA | RE=0, Vcc=0 or 5.5V, Vout= -7V | 4 | |||
| Receiver Input Resistance | 96 | kΩ | -7V ≤ Vcm ≤ 12V | 4 | |||
| Input Current (A, B pins) | 125 | μA | DE=0, RE=0, Vcc=0 or 5.5V, Vin= 12V | 4 | |||
| Input Current (A, B pins) | -100 | μA | DE=0, RE=0, Vcc=0 or 5.5V, Vin= -7V | 4 | |||
| Receiver Differential Threshold | VA-VB | -200 | -125 | -40 | mV | -7V ≤ Vcm ≤ 12V | 4 |
| Receiver Input Hysteresis | 25 | mV | 4 | ||||
| Receiver Output Voltage Low | Vol | 0.4 | V | Iout = 8mA, Vid = -200mV | 4 | ||
| High-Z Receiver Output Current | -1 | 1 | μA | Vcc =5.5V, 0 ≤ Vout ≤ Vcc | 4 | ||
| Receiver Output Short Circuit Current | -95 | 95 | mA | 0V ≤ Vro≤ Vcc | 4 | ||
| Supply Current, Active Mode | IQ | 400 | 900 | μA | No load, DI=0 or Vcc | 4 | |
| Supply Current, Shutdown Mode | 1 | μA | DE=0, RE=Vcc, DI=Vcc | 4 | |||
| Thermal Shutdown Temperature | 165 | °C | Junction temperature | 4 | |||
| Thermal Shutdown Hysteresis | 15 | 4 | |||||
| Data Signaling Rate | 1 / tUI | 115 | Kbps | Duty Cycle 40 to 60% | 5 | ||
| Driver Propagation Delay | tPHL, tPLH | 3500 | ns | RL = 54Ω, CL = 50pF | 5 | ||
| Driver Output Rise/Fall Time | tR, tF | 667 | 1200 | 2500 | ns | 5 | |
| Driver Differential Skew | tPLH, tPHL | -500 | 500 | ns | 5 | ||
| Driver Enable to Output High | tDZH | 3500 | ns | 5 | |||
| Driver Enable to Output Low | tDZL | 3500 | ns | 5 | |||
| Driver Disable from Output High | tDHZ | 100 | ns | 5 | |||
| Driver Disable from Output Low | tDLZ | 100 | ns | 5 | |||
| Shutdown to Driver Output Valid | tDZV | 6000 | ns | 5 | |||
| Receiver Propagation Delay | 250 | ns | CL = 15pF, VID = ±2V | 5 | |||
| Receiver Propagation Delay Skew | tPLH, tPHL | -50 | 50 | ns | 5 | ||
| Receiver Output Rise/Fall Time | tR, tF | 50 | ns | CL = 15pF | 5 | ||
| Receiver Enable to Output High | tZH | 100 | ns | 5 | |||
| Receiver Enable to Output Low | tZL | 100 | ns | 5 | |||
| Receiver Disable from Output High | tHZ | 100 | ns | 5 | |||
| Receiver Disable from Output Low | tLZ | 100 | ns | 5 | |||
| Shutdown to Receiver Output Valid | tROV | 3500 | ns | 5 | |||
| Time to Shutdown | 50 | 600 | ns | Note 2,3 | 5 | ||
| Thermal Resistance, 8-Pin SO | Øja | 128.4 | °C/W | 8-Pin SO | 3 |
CAD (KiCad official)
- Symbol:
SP4082EEN-L - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sp4082een-l-etched.step/sp4082een-l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sp4082een-l.step/sp4082een-l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (14 pp, sha256
732751bcd7ee688d, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).