main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sp3485en-ms: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sp3485en-ms-etched.glb Publish 0.1.0 · Ray
sp3485en-ms-etched.step sp3485en-ms: factory component page (tier=lcsc) · Ray
sp3485en-ms-hero.glb sp3485en-ms: hero GLB from the etched model (keeps the MPN mark) · Ray
sp3485en-ms-hero.overlay.json Publish 0.1.0 · Ray
sp3485en-ms.glb Publish 0.1.0 · Ray
sp3485en-ms.kicad_mod Publish 0.1.0 · Ray
sp3485en-ms.kicad_sym Publish 0.1.0 · Ray
sp3485en-ms.lbr Publish 0.1.0 · Ray
sp3485en-ms.step Publish 0.1.0 · Ray

SP3485EN-MS

MSKSEMI · RS-485 / RS-422 ICs · SOP-8

SP3485EN-MS from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: goes high when /RE is low and A - B is at or above -10 mV, and goes low when A - B is at or below -200 mV.
2 /RE input Active-low receiver output enable: RO is high impedance when /RE is high, and driving /RE high with DE low puts the device into low-power shutdown.
3 DE input Active-high driver output enable: the driver outputs are high impedance when DE is low, and driving /RE high with DE low puts the device into low-power shutdown.
4 DI input Driver input: with DE high, a low on DI forces the non-inverting output low and the inverting output high, and a high on DI forces the non-inverting output high and the inverting output low.
5 GND power_in Ground; the reference point for all voltages on the device.
6 A bidirectional Non-inverting receiver input and non-inverting driver output on the RS-485 bus.
7 B bidirectional Inverting receiver input and inverting driver output on the RS-485 bus.
8 VCC power_in Positive supply, specified for 3.0 V to 5.5 V operation, with an absolute maximum supply voltage of 7 V.

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 7 V 4
Control input voltage /RE, DE, DI -0.3 V 4
Receiver input voltage A, B -15 15 V 4
Receiver output voltage RO -0.3 V 4
Operating temperature range -40 125 ℃ 4
Storage temperature range -60 150 ℃ 4
Lead temperature 300 ℃ 4
Continuous power dissipation (SOP8) 470 mW 4
Differential driver output (no load) VOD1 3 5.5 V No load 5
Differential driver output VOD2 1.5 V Figure 2, RL = 54 Ω, VCC=3.3V 5
Change in magnitude of driver differential output voltage ΔVOD 0.2 V Figure 2, RL = 54 Ω 5
Driver common-mode output voltage VOC 3 V Figure 2, RL = 54 Ω 5
Change in magnitude of common-mode output voltage ΔVOC 0.2 V Figure 2, RL = 54 Ω 5
Input high voltage VIH 2 V DE, DI, /RE 5
Input low voltage VIL 0.8 V DE, DI, /RE 5
Logic input current IIN1 -2 2 μA DE, DI, /RE 5
Output short-circuit current, short-circuit to high IOSD1 250 mA short-circuit to 0V~12V 5
Output short-circuit current, short-circuit to low IOSD2 -250 mA short-circuit to -7V~0V 5
Input current (A, B) IIN2 125 μA DE = 0 V, VCC=0 or 3.3/5V, VIN = 12 V 5
Input current (A, B) IIN2 -100 μA DE = 0 V, VCC=0 or 3.3/5V, VIN = -7 V 5
Positive input threshold voltage VIT+ -10 mV -7V≦VCM≦ 12V 6
Reverse input threshold voltage VIT- -200 mV -7V≦VCM≦ 12V 6
Input hysteresis voltage Vhys 10 30 mV -7V≦VCM≦ 12V 6
Receiver output low voltage VOL 0.4 V IOUT = +2.5mA, VID = -200 mV 6
Three-state output current at receiver IOZR -1 1 μA 0.4 V < VO < 2.4 V 6
Receiver input resistance RIN 96 kΩ -7V≦VCM≦ 12V 6
Receiver short-circuit output current IOSR 8 90 mA 0 V≤VO≤VCC 6
Supply current ICC1 240 650 μA /RE=0V, DE = 0 V, VCC=3.3V 6
Supply current ICC1 270 750 μA /RE=0V, DE = 0 V, VCC=5V 6
Supply current ICC2 250 650 μA /RE=VCC, DE=VCC, VCC=3.3V 6
Supply current ICC2 280 750 μA /RE=VCC, DE=VCC, VCC=5V 6
Shutdown current ISHDN 0.2 10 μA /RE=VCC, DE=0V, VCC=3.3V 6
Driver differential output delay tDD 20 40 ns RL = 60 Ω, CL1=CL2=100pF (figure 3, 4) 7
Driver differential output transition time tTD 12 28 ns 7
Driver propagation delay from low to high tPLH 20 40 ns RL = 27 Ω (figure 3, 4) 7
Driver propagation delay from high to low tPHL 20 40 ns 7
/tPLH-tPHL/ driver propagation delay skew tPDS 1 8 ns 7
Driver enable to output high tPZH 55 ns RL = 110Ω (figure 5, 6) 7
Driver enable to output low tPZL 55 ns 7
Driver disable time from low tPLZ 85 ns RL = 110Ω (figure 5, 6) 7
Driver disable time from high tPHZ 85 ns 7
In shutdown mode, enable to output high tDSH 20 100 ns RL = 110Ω (figure 5, 6) 7
In shutdown mode, enable to output low tDSL 20 100 ns RL = 110Ω (figure 5, 6) 7
Receiver input to output from low to high tRPLH 60 ns CL=15pF, Figure 7 & Figure 8 7
Receiver input to output from high to low tRPHL 60 ns 7
/tRPLH − tRPHL/ receiver propagation delay skew tRPDS 3 10 ns 8
Receiver enable to output low tRPZL 15 40 ns CL=15pF, Figure 7 & Figure 8 8
Receiver enable to output high tRPZH 15 40 ns CL=15pF, Figure 7 & Figure 8 8
Receiver disable time from low tPRLZ 25 55 ns CL=15pF, Figure 7 & Figure 8 8
Receiver disable time from high tPRHZ 25 55 ns CL=15pF, Figure 7 & Figure 8 8
In shutdown mode, enable to output high tRPSH 150 500 ns CL=15pF, Figure 7 & Figure 8 8
In shutdown mode, enable to output low tRPSL 150 500 ns CL=15pF, Figure 7 & Figure 8 8
Time to shutdown tSHDN 50 300 ns NOTE2 8

CAD (KiCad official)

  • Symbol: SP3485EN-MS
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: sp3485en-ms-etched.step / sp3485en-ms-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sp3485en-ms.step / sp3485en-ms.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (18 pp, sha256 2f8e488a700d89d9, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF