main
History Download
Ray Publish 0.1.3 c545148

SN8F5814SG

SONIX · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

SN8F5814SG from SONIX, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VSS power_in Ground pin at 0 V, the low reference for the device.
2 SCL/T2COM0/INT1/XIN/P00 bidirectional GPIO P0.0 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as external system clock input (XIN), I2C clock (SCL), Timer 2 compare 0 output (T2COM0) and external interrupt 1 (INT1).
3 SDA/T2COM1/XOUT/P01 bidirectional GPIO P0.1 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as crystal/resonator drive output (XOUT), I2C data (SDA) and Timer 2 compare 1 output (T2COM1).
4 PWM10/T2CC2/LXIN/P02 bidirectional GPIO P0.2 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as low-speed clock external input (LXIN), Timer 2 capture 2 input (T2CC2) and PWM output (PWM10).
5 PWM20/T2CC3/LXOUT/P03 bidirectional GPIO P0.3 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as low-speed crystal drive output (LXOUT), Timer 2 capture 3 input (T2CC3) and PWM output (PWM20).
6 INT2/RST/P04 bidirectional GPIO P0.4 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as active-low system reset (RST) and external interrupt 2 (INT2).
7 T2CC0/COM0/P05 bidirectional GPIO P0.5 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as Timer 2 capture 0 input (T2CC0) and LCD common 0 output (COM0).
8 T2CC1/COM1/P06 bidirectional GPIO P0.6 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as Timer 2 capture 1 input (T2CC1) and LCD common 1 output (COM1).
9 T2COM2/COM2/P07 bidirectional GPIO P0.7 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as Timer 2 compare 2 output (T2COM2) and LCD common 2 output (COM2).
10 T2COM3/COM3/P10 bidirectional GPIO P1.0 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as Timer 2 compare 3 output (T2COM3) and LCD common 3 output (COM3).
11 SEG0/CM15/P11 bidirectional GPIO P1.1 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 0 output (SEG0) and capacitive-sensing input channel 15 (CM15).
12 SEG1/CM14/P12 bidirectional GPIO P1.2 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 1 output (SEG1) and capacitive-sensing input channel 14 (CM14).
13 SEG2/CM13/P13 bidirectional GPIO P1.3 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 2 output (SEG2) and capacitive-sensing input channel 13 (CM13).
14 SEG3/CM12/P14 bidirectional GPIO P1.4 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 3 output (SEG3) and capacitive-sensing input channel 12 (CM12).
15 P15/CM11/AIN12/SEG4 bidirectional GPIO P1.5 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 4 output (SEG4), ADC input channel 12 (AIN12) and capacitive-sensing input channel 11 (CM11).
16 P16/CM10/AIN11/SEG5 bidirectional GPIO P1.6 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 5 output (SEG5), ADC input channel 11 (AIN11) and capacitive-sensing input channel 10 (CM10).
17 P17/CM9/AIN10/SEG6 bidirectional GPIO P1.7 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 6 output (SEG6), ADC input channel 10 (AIN10) and capacitive-sensing input channel 9 (CM9).
18 P27/CM8/AIN9/SEG7/URX bidirectional GPIO P2.7 with Schmitt-trigger input and built-in pull-up; alternates as UART receive pin (URX), LCD segment 7 output (SEG7), ADC input channel 9 (AIN9) and capacitive-sensing input channel 8 (CM8).
19 P26/CM7/AIN8/SEG8/UTX bidirectional GPIO P2.6 with Schmitt-trigger input and built-in pull-up; alternates as UART transmit pin (UTX), LCD segment 8 output (SEG8), ADC input channel 8 (AIN8) and capacitive-sensing input channel 7 (CM7).
20 P25/CM6/AIN7/SEG9/SSN bidirectional GPIO P2.5 with Schmitt-trigger input and built-in pull-up; alternates as SPI slave select (SSN, slave mode), LCD segment 9 output (SEG9), ADC input channel 7 (AIN7) and capacitive-sensing input channel 6 (CM6).
21 P24/CM5/AIN6/SEG10/SCK bidirectional GPIO P2.4 with Schmitt-trigger input and built-in pull-up; alternates as SPI clock (SCK), LCD segment 10 output (SEG10), ADC input channel 6 (AIN6) and capacitive-sensing input channel 5 (CM5).
22 P23/CM4/AIN5/SEG11/MISO bidirectional GPIO P2.3 with Schmitt-trigger input and built-in pull-up; alternates as SPI MISO, LCD segment 11 output (SEG11), ADC input channel 5 (AIN5) and capacitive-sensing input channel 4 (CM4).
23 P22/CM3/AIN4/SEG12/MOSI bidirectional GPIO P2.2 with Schmitt-trigger input and built-in pull-up; alternates as SPI MOSI, LCD segment 12 output (SEG12), ADC input channel 4 (AIN4) and capacitive-sensing input channel 3 (CM3).
24 P21/CM2/AIN3/SEG13/PWM21 bidirectional GPIO P2.1 with Schmitt-trigger input and built-in pull-up; alternates as PWM output (PWM21), LCD segment 13 output (SEG13), ADC input channel 3 (AIN3) and capacitive-sensing input channel 2 (CM2).
25 P20/CM1/AIN2/SEG14/PWM11 bidirectional GPIO P2.0 with Schmitt-trigger input and built-in pull-up; alternates as PWM output (PWM11), LCD segment 14 output (SEG14), ADC input channel 2 (AIN2) and capacitive-sensing input channel 1 (CM1).
26 P31/AIN1/SWAT bidirectional GPIO P3.1 with Schmitt-trigger input and built-in pull-up; alternates as the debug interface pin (SWAT) and ADC input channel 1 (AIN1).
27 P30/CM0/AIN0/SEG15/INT0/AVREFH/PWMFL bidirectional GPIO P3.0 with Schmitt-trigger input and built-in pull-up; alternates as external interrupt 0 (INT0), PWM fail-detect input (PWMFL), LCD segment 15 output (SEG15), ADC input channel 0 (AIN0), external ADC reference voltage input (AVREFH) and capacitive-sensing input channel 0 (CM0).
28 VDD power_in Power supply pin; the device operates from 1.8 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer SONIX
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VDD to VSS -0.3 6 V 151
Voltage applied at any pin to VSS -0.3 V 151
Operating ambient temperature -40 85 °C 151
Storage ambient temperature -40 125 °C 151
Junction Temperature -40 125 °C 151
VDD Operating voltage VDD 1.8 5.5 V fcpu = 1MHz 151
RAM data retention voltage VDR 1.5 V 151
VDD rising rate VPOR 0.05 V/ms Star-marked: non-verified design reference; ambient 25°C 151
Normal mode supply current IDD1 2.77 mA CKCON = 0x00, 32MHz IHRC; VDD = 3V, fcpu = 1MHz 151
Normal mode supply current IDD1 2.78 mA CKCON = 0x00, 32MHz IHRC; VDD = 5V, fcpu = 1MHz 151
Normal mode supply current IDD1 3.24 mA CKCON = 0x00, 32MHz IHRC; VDD = 3V, fcpu = 4MHz 151
Normal mode supply current IDD1 3.26 mA CKCON = 0x00, 32MHz IHRC; VDD = 5V, fcpu = 4MHz 151
Normal mode supply current IDD1 3.87 mA CKCON = 0x00, 32MHz IHRC; VDD = 3V, fcpu = 8MHz 151
Normal mode supply current IDD1 3.89 mA CKCON = 0x00, 32MHz IHRC; VDD = 5V, fcpu = 8MHz 151
Normal mode supply current IDD1 2.52 mA CKCON = 0x00, 16MHz Crystal; VDD = 3V, fcpu = 1MHz 151
Normal mode supply current IDD1 3.18 mA CKCON = 0x00, 16MHz Crystal; VDD = 5V, fcpu = 1MHz 151
Normal mode supply current IDD1 3.06 mA CKCON = 0x00, 16MHz Crystal; VDD = 3V, fcpu = 4MHz 151
Normal mode supply current IDD1 3.72 mA CKCON = 0x00, 16MHz Crystal; VDD = 5V, fcpu = 4MHz 151
Normal mode supply current IDD1 3.7 mA CKCON = 0x00, 16MHz Crystal; VDD = 3V, fcpu = 8MHz 151
Normal mode supply current IDD1 4.29 mA CKCON = 0x00, 16MHz Crystal; VDD = 5V, fcpu = 8MHz 151
STOP mode supply current IDD2 4 8.5 μA VDD = 3V 151
STOP mode supply current IDD2 4.9 9 μA VDD = 5V 151
STOP mode supply current (LCD enable, no panel) IDD3 108 μA VDD = 3V, 32KHz Crystal 151
STOP mode supply current (LCD enable, no panel) IDD3 124 μA VDD = 5V, 32KHz Crystal 151
STOP mode supply current (LCD enable, no panel) IDD3 101 μA VDD = 3V, Internal 16K 151
STOP mode supply current (LCD enable, no panel) IDD3 112 μA VDD = 5V, Internal 16K 151
IDLE mode supply current (fcpu = 1MHz) IDD4 1.02 mA VDD = 3V, 32MHz IHRC 152
IDLE mode supply current (fcpu = 1MHz) IDD4 1.04 mA VDD = 5V, 32MHz IHRC 152
IDLE mode supply current (fcpu = 1MHz) IDD4 0.77 mA VDD = 3V, 16MHz Crystal 152
IDLE mode supply current (fcpu = 1MHz) IDD4 1.41 mA VDD = 5V, 16MHz Crystal 152
IDLE mode supply current (fcpu = 1MHz) IDD4 0.33 mA VDD = 3V, 4MHz Crystal 152
IDLE mode supply current (fcpu = 1MHz) IDD4 0.53 mA VDD = 5V, 4MHz Crystal 152
Internal high clock generator frequency FIHRC 31.84 32 32.16 MHz VDD = 1.8V to 5.5V, 25°C 152
Internal high clock generator frequency FIHRC 31.68 31.99 MHz VDD = 1.8V to 5.5V, 25°C to 85°C 152
Internal high clock generator frequency FIHRC 32.31 32.64 MHz VDD = 1.8V to 5.5V, -40°C to 25°C 152
Internal low clock generator frequency FILRC 12 16 24 kHz VDD = 5.0V, 25°C 152
LVD18 detect voltage VLVD18 1.7 1.8 1.9 V 25°C 152
LVD18 detect voltage VLVD18 1.6 1.8 2 V -40°C to 85°C 152
I/O port input leakage current ILEKG 2 μA VIN = VDD 152
Pull-up resistor RUP 100 200 300 kΩ VDD = 3V 152
Pull-up resistor RUP 50 100 150 kΩ VDD = 5V 152
I/O output source current IOH 12 19 mA VDD = 5V, VO = VDD-0.5V 152
I/O sink current (P00, P04, P11, P17, P2, P3) IOL1 15 22 mA VDD = 5V, VO = VSS+0.5V 153
I/O sink current (P05, P07, P10) IOL2 200 mA VDD = 5V, VO = VSS+1.5V 153
Operating voltage (ADC) VADC 2 5.5 V 153
AIN channels input voltage VAIN 0 V VDD = 5V; maximum printed as VREFH 153
AVREFH pin input voltage VREFH 2 V VDD = 5V; maximum printed as VDD 153
Internal 4V reference voltage VIREF 3.92 4 4.08 V VDD = 5V 153
Internal 3V reference voltage VIREF 2.94 3 3.06 V VDD = 5V 153
Internal 2V reference voltage VIREF 1.96 2 2.04 V VDD = 5V 153
ADC current consumption IAD 0.69 mA VDD = 3V 153
ADC current consumption IAD 0.79 mA VDD = 5V 153
ADC clock fADCLK 32 MHz VDD = 5V 153
ADC sampling rate fADSMP 500 kHz VDD = 5V 153
ADC function enable period tADEN 100 μs VDD = 5V 153
Input offset voltage VOFFSET -10 0 10 mV Non-trimmed 153
Supply voltage (flash) Vdd 1.8 5.5 V 154
Write current Iwrt 3 4 mA 25°C 154
Write time Twrt 6 8 ms Write 1 page=32 bytes, 25°C 154

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin The circuit below demonstrates the appropriate method to connect microcontroller’s SWAT pin and SN-Link3 Adapter. 159

CAD (KiCad official)

  • Symbol: SN8F5814SG
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: sn8f5814sg-etched.step / sn8f5814sg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn8f5814sg.step / sn8f5814sg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SONIX datasheet, copy hosted by LCSC (177 pp, sha256 6061f8b1c1fff302, retrieved 2026-11-17)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF