3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSN8F5814SG
SONIX · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
SN8F5814SG from SONIX, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground pin at 0 V, the low reference for the device. |
| 2 | SCL/T2COM0/INT1/XIN/P00 | bidirectional | GPIO P0.0 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as external system clock input (XIN), I2C clock (SCL), Timer 2 compare 0 output (T2COM0) and external interrupt 1 (INT1). |
| 3 | SDA/T2COM1/XOUT/P01 | bidirectional | GPIO P0.1 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as crystal/resonator drive output (XOUT), I2C data (SDA) and Timer 2 compare 1 output (T2COM1). |
| 4 | PWM10/T2CC2/LXIN/P02 | bidirectional | GPIO P0.2 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as low-speed clock external input (LXIN), Timer 2 capture 2 input (T2CC2) and PWM output (PWM10). |
| 5 | PWM20/T2CC3/LXOUT/P03 | bidirectional | GPIO P0.3 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as low-speed crystal drive output (LXOUT), Timer 2 capture 3 input (T2CC3) and PWM output (PWM20). |
| 6 | INT2/RST/P04 | bidirectional | GPIO P0.4 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as active-low system reset (RST) and external interrupt 2 (INT2). |
| 7 | T2CC0/COM0/P05 | bidirectional | GPIO P0.5 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as Timer 2 capture 0 input (T2CC0) and LCD common 0 output (COM0). |
| 8 | T2CC1/COM1/P06 | bidirectional | GPIO P0.6 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as Timer 2 capture 1 input (T2CC1) and LCD common 1 output (COM1). |
| 9 | T2COM2/COM2/P07 | bidirectional | GPIO P0.7 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as Timer 2 compare 2 output (T2COM2) and LCD common 2 output (COM2). |
| 10 | T2COM3/COM3/P10 | bidirectional | GPIO P1.0 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as Timer 2 compare 3 output (T2COM3) and LCD common 3 output (COM3). |
| 11 | SEG0/CM15/P11 | bidirectional | GPIO P1.1 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 0 output (SEG0) and capacitive-sensing input channel 15 (CM15). |
| 12 | SEG1/CM14/P12 | bidirectional | GPIO P1.2 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 1 output (SEG1) and capacitive-sensing input channel 14 (CM14). |
| 13 | SEG2/CM13/P13 | bidirectional | GPIO P1.3 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 2 output (SEG2) and capacitive-sensing input channel 13 (CM13). |
| 14 | SEG3/CM12/P14 | bidirectional | GPIO P1.4 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 3 output (SEG3) and capacitive-sensing input channel 12 (CM12). |
| 15 | P15/CM11/AIN12/SEG4 | bidirectional | GPIO P1.5 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 4 output (SEG4), ADC input channel 12 (AIN12) and capacitive-sensing input channel 11 (CM11). |
| 16 | P16/CM10/AIN11/SEG5 | bidirectional | GPIO P1.6 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 5 output (SEG5), ADC input channel 11 (AIN11) and capacitive-sensing input channel 10 (CM10). |
| 17 | P17/CM9/AIN10/SEG6 | bidirectional | GPIO P1.7 with Schmitt-trigger input, built-in pull-up and level-change wake-up; alternates as LCD segment 6 output (SEG6), ADC input channel 10 (AIN10) and capacitive-sensing input channel 9 (CM9). |
| 18 | P27/CM8/AIN9/SEG7/URX | bidirectional | GPIO P2.7 with Schmitt-trigger input and built-in pull-up; alternates as UART receive pin (URX), LCD segment 7 output (SEG7), ADC input channel 9 (AIN9) and capacitive-sensing input channel 8 (CM8). |
| 19 | P26/CM7/AIN8/SEG8/UTX | bidirectional | GPIO P2.6 with Schmitt-trigger input and built-in pull-up; alternates as UART transmit pin (UTX), LCD segment 8 output (SEG8), ADC input channel 8 (AIN8) and capacitive-sensing input channel 7 (CM7). |
| 20 | P25/CM6/AIN7/SEG9/SSN | bidirectional | GPIO P2.5 with Schmitt-trigger input and built-in pull-up; alternates as SPI slave select (SSN, slave mode), LCD segment 9 output (SEG9), ADC input channel 7 (AIN7) and capacitive-sensing input channel 6 (CM6). |
| 21 | P24/CM5/AIN6/SEG10/SCK | bidirectional | GPIO P2.4 with Schmitt-trigger input and built-in pull-up; alternates as SPI clock (SCK), LCD segment 10 output (SEG10), ADC input channel 6 (AIN6) and capacitive-sensing input channel 5 (CM5). |
| 22 | P23/CM4/AIN5/SEG11/MISO | bidirectional | GPIO P2.3 with Schmitt-trigger input and built-in pull-up; alternates as SPI MISO, LCD segment 11 output (SEG11), ADC input channel 5 (AIN5) and capacitive-sensing input channel 4 (CM4). |
| 23 | P22/CM3/AIN4/SEG12/MOSI | bidirectional | GPIO P2.2 with Schmitt-trigger input and built-in pull-up; alternates as SPI MOSI, LCD segment 12 output (SEG12), ADC input channel 4 (AIN4) and capacitive-sensing input channel 3 (CM3). |
| 24 | P21/CM2/AIN3/SEG13/PWM21 | bidirectional | GPIO P2.1 with Schmitt-trigger input and built-in pull-up; alternates as PWM output (PWM21), LCD segment 13 output (SEG13), ADC input channel 3 (AIN3) and capacitive-sensing input channel 2 (CM2). |
| 25 | P20/CM1/AIN2/SEG14/PWM11 | bidirectional | GPIO P2.0 with Schmitt-trigger input and built-in pull-up; alternates as PWM output (PWM11), LCD segment 14 output (SEG14), ADC input channel 2 (AIN2) and capacitive-sensing input channel 1 (CM1). |
| 26 | P31/AIN1/SWAT | bidirectional | GPIO P3.1 with Schmitt-trigger input and built-in pull-up; alternates as the debug interface pin (SWAT) and ADC input channel 1 (AIN1). |
| 27 | P30/CM0/AIN0/SEG15/INT0/AVREFH/PWMFL | bidirectional | GPIO P3.0 with Schmitt-trigger input and built-in pull-up; alternates as external interrupt 0 (INT0), PWM fail-detect input (PWMFL), LCD segment 15 output (SEG15), ADC input channel 0 (AIN0), external ADC reference voltage input (AVREFH) and capacitive-sensing input channel 0 (CM0). |
| 28 | VDD | power_in | Power supply pin; the device operates from 1.8 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SONIX |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at VDD to VSS | -0.3 | 6 | V | 151 | |||
| Voltage applied at any pin to VSS | -0.3 | V | 151 | ||||
| Operating ambient temperature | -40 | 85 | °C | 151 | |||
| Storage ambient temperature | -40 | 125 | °C | 151 | |||
| Junction Temperature | -40 | 125 | °C | 151 | |||
| VDD Operating voltage | VDD | 1.8 | 5.5 | V | fcpu = 1MHz | 151 | |
| RAM data retention voltage | VDR | 1.5 | V | 151 | |||
| VDD rising rate | VPOR | 0.05 | V/ms | Star-marked: non-verified design reference; ambient 25°C | 151 | ||
| Normal mode supply current | IDD1 | 2.77 | mA | CKCON = 0x00, 32MHz IHRC; VDD = 3V, fcpu = 1MHz | 151 | ||
| Normal mode supply current | IDD1 | 2.78 | mA | CKCON = 0x00, 32MHz IHRC; VDD = 5V, fcpu = 1MHz | 151 | ||
| Normal mode supply current | IDD1 | 3.24 | mA | CKCON = 0x00, 32MHz IHRC; VDD = 3V, fcpu = 4MHz | 151 | ||
| Normal mode supply current | IDD1 | 3.26 | mA | CKCON = 0x00, 32MHz IHRC; VDD = 5V, fcpu = 4MHz | 151 | ||
| Normal mode supply current | IDD1 | 3.87 | mA | CKCON = 0x00, 32MHz IHRC; VDD = 3V, fcpu = 8MHz | 151 | ||
| Normal mode supply current | IDD1 | 3.89 | mA | CKCON = 0x00, 32MHz IHRC; VDD = 5V, fcpu = 8MHz | 151 | ||
| Normal mode supply current | IDD1 | 2.52 | mA | CKCON = 0x00, 16MHz Crystal; VDD = 3V, fcpu = 1MHz | 151 | ||
| Normal mode supply current | IDD1 | 3.18 | mA | CKCON = 0x00, 16MHz Crystal; VDD = 5V, fcpu = 1MHz | 151 | ||
| Normal mode supply current | IDD1 | 3.06 | mA | CKCON = 0x00, 16MHz Crystal; VDD = 3V, fcpu = 4MHz | 151 | ||
| Normal mode supply current | IDD1 | 3.72 | mA | CKCON = 0x00, 16MHz Crystal; VDD = 5V, fcpu = 4MHz | 151 | ||
| Normal mode supply current | IDD1 | 3.7 | mA | CKCON = 0x00, 16MHz Crystal; VDD = 3V, fcpu = 8MHz | 151 | ||
| Normal mode supply current | IDD1 | 4.29 | mA | CKCON = 0x00, 16MHz Crystal; VDD = 5V, fcpu = 8MHz | 151 | ||
| STOP mode supply current | IDD2 | 4 | 8.5 | μA | VDD = 3V | 151 | |
| STOP mode supply current | IDD2 | 4.9 | 9 | μA | VDD = 5V | 151 | |
| STOP mode supply current (LCD enable, no panel) | IDD3 | 108 | μA | VDD = 3V, 32KHz Crystal | 151 | ||
| STOP mode supply current (LCD enable, no panel) | IDD3 | 124 | μA | VDD = 5V, 32KHz Crystal | 151 | ||
| STOP mode supply current (LCD enable, no panel) | IDD3 | 101 | μA | VDD = 3V, Internal 16K | 151 | ||
| STOP mode supply current (LCD enable, no panel) | IDD3 | 112 | μA | VDD = 5V, Internal 16K | 151 | ||
| IDLE mode supply current (fcpu = 1MHz) | IDD4 | 1.02 | mA | VDD = 3V, 32MHz IHRC | 152 | ||
| IDLE mode supply current (fcpu = 1MHz) | IDD4 | 1.04 | mA | VDD = 5V, 32MHz IHRC | 152 | ||
| IDLE mode supply current (fcpu = 1MHz) | IDD4 | 0.77 | mA | VDD = 3V, 16MHz Crystal | 152 | ||
| IDLE mode supply current (fcpu = 1MHz) | IDD4 | 1.41 | mA | VDD = 5V, 16MHz Crystal | 152 | ||
| IDLE mode supply current (fcpu = 1MHz) | IDD4 | 0.33 | mA | VDD = 3V, 4MHz Crystal | 152 | ||
| IDLE mode supply current (fcpu = 1MHz) | IDD4 | 0.53 | mA | VDD = 5V, 4MHz Crystal | 152 | ||
| Internal high clock generator frequency | FIHRC | 31.84 | 32 | 32.16 | MHz | VDD = 1.8V to 5.5V, 25°C | 152 |
| Internal high clock generator frequency | FIHRC | 31.68 | 31.99 | MHz | VDD = 1.8V to 5.5V, 25°C to 85°C | 152 | |
| Internal high clock generator frequency | FIHRC | 32.31 | 32.64 | MHz | VDD = 1.8V to 5.5V, -40°C to 25°C | 152 | |
| Internal low clock generator frequency | FILRC | 12 | 16 | 24 | kHz | VDD = 5.0V, 25°C | 152 |
| LVD18 detect voltage | VLVD18 | 1.7 | 1.8 | 1.9 | V | 25°C | 152 |
| LVD18 detect voltage | VLVD18 | 1.6 | 1.8 | 2 | V | -40°C to 85°C | 152 |
| I/O port input leakage current | ILEKG | 2 | μA | VIN = VDD | 152 | ||
| Pull-up resistor | RUP | 100 | 200 | 300 | kΩ | VDD = 3V | 152 |
| Pull-up resistor | RUP | 50 | 100 | 150 | kΩ | VDD = 5V | 152 |
| I/O output source current | IOH | 12 | 19 | mA | VDD = 5V, VO = VDD-0.5V | 152 | |
| I/O sink current (P00, P04, P11, P17, P2, P3) | IOL1 | 15 | 22 | mA | VDD = 5V, VO = VSS+0.5V | 153 | |
| I/O sink current (P05, P07, P10) | IOL2 | 200 | mA | VDD = 5V, VO = VSS+1.5V | 153 | ||
| Operating voltage (ADC) | VADC | 2 | 5.5 | V | 153 | ||
| AIN channels input voltage | VAIN | 0 | V | VDD = 5V; maximum printed as VREFH | 153 | ||
| AVREFH pin input voltage | VREFH | 2 | V | VDD = 5V; maximum printed as VDD | 153 | ||
| Internal 4V reference voltage | VIREF | 3.92 | 4 | 4.08 | V | VDD = 5V | 153 |
| Internal 3V reference voltage | VIREF | 2.94 | 3 | 3.06 | V | VDD = 5V | 153 |
| Internal 2V reference voltage | VIREF | 1.96 | 2 | 2.04 | V | VDD = 5V | 153 |
| ADC current consumption | IAD | 0.69 | mA | VDD = 3V | 153 | ||
| ADC current consumption | IAD | 0.79 | mA | VDD = 5V | 153 | ||
| ADC clock | fADCLK | 32 | MHz | VDD = 5V | 153 | ||
| ADC sampling rate | fADSMP | 500 | kHz | VDD = 5V | 153 | ||
| ADC function enable period | tADEN | 100 | μs | VDD = 5V | 153 | ||
| Input offset voltage | VOFFSET | -10 | 0 | 10 | mV | Non-trimmed | 153 |
| Supply voltage (flash) | Vdd | 1.8 | 5.5 | V | 154 | ||
| Write current | Iwrt | 3 | 4 | mA | 25°C | 154 | |
| Write time | Twrt | 6 | 8 | ms | Write 1 page=32 bytes, 25°C | 154 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | The circuit below demonstrates the appropriate method to connect microcontroller’s SWAT pin and SN-Link3 Adapter. | 159 |
CAD (KiCad official)
- Symbol:
SN8F5814SG - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
sn8f5814sg-etched.step/sn8f5814sg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn8f5814sg.step/sn8f5814sg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SONIX datasheet, copy hosted by LCSC (177 pp, sha256
6061f8b1c1fff302, retrieved 2026-11-17) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).