main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sn75lbc182p: viewers rendered from the public page · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
sn75lbc182p-etched.glb Publish 0.1.0 · Ray
sn75lbc182p-etched.step sn75lbc182p: factory component page (tier=mfr) · Ray
sn75lbc182p-hero.glb sn75lbc182p: hero GLB from the etched model (keeps the MPN mark) · Ray
sn75lbc182p-hero.overlay.json Publish 0.1.0 · Ray
sn75lbc182p.glb Publish 0.1.0 · Ray
sn75lbc182p.kicad_mod Publish 0.1.0 · Ray
sn75lbc182p.kicad_sym Publish 0.1.0 · Ray
sn75lbc182p.lbr Publish 0.1.0 · Ray
sn75lbc182p.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

SN75LBC182P

Texas Instruments · RS-485 / RS-422 ICs · PDIP-8

SN75LBC182P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output Receiver output: high for VID ≥ 0.2 V, low for VID ≤ −0.2 V, and high when the bus inputs are open (fail-safe); high-impedance when RE is high.
2 RE input Active-low receiver enable input; the receiver output is high-impedance when RE is held high.
3 DE input Active-high driver enable input; the driver outputs A and B are high-impedance when DE is low.
4 D input Driver input; with DE high, a high on D drives A high and B low, and a low on D drives A low and B high.
5 GND power_in Device ground; all voltages except differential bus voltages are referenced to the network ground terminal.
6 A bidirectional Non-inverting differential bus I/O; voltage at any bus terminal is limited to −7 V to 12 V in recommended operation and −15 V to 15 V absolute maximum.
7 B bidirectional Inverting differential bus I/O; voltage at any bus terminal is limited to −7 V to 12 V in recommended operation and −15 V to 15 V absolute maximum.
8 VCC power_in Device supply voltage, 4.75 V to 5.25 V recommended (5 V nominal), with 7 V absolute maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VCC VCC 4.75 5 5.25 V 5
Voltage at any bus I/O terminal (separately or common mode) VI or VIC -7 12 V 5
High-level input voltage, D, DE, RE VIH 2 V 5
Low-level input voltage VIL 0.8 V 5
Differential input voltage VID -12 12 V Differential input/output bus voltage measured at A with respect to B 5
Output current, driver IO -60 60 mA Driver 5
Output current, receiver IO -8 4 mA Receiver 5
Operating free-air temperature, SN75LBC182 TA 0 70 °C SN75LBC182 5
Supply voltage range VCC -0.5 7 V With respect to network ground 5
Voltage range at any bus terminal (A or B) VI -15 15 V 5
Input voltage (D, DE, R or RE) VI -0.3 7 V 5
Receiver output current IO -20 20 mA 5
Continuous total power dissipation, P (PDIP) package power rating 1150 mW P package, TA ≤ 25°C 5
Junction-to-ambient thermal resistance, P (PDIP) 8-pin RθJA 84.3 °C/W P (PDIP) package, 8 pins 6
Driver input clamp voltage VIK -1.5 V II = −18 mA 6
Driver output voltage VO 0 V IO = 0; printed max is VCC 6
Differential output voltage /VOD/ 1.5 2.2 V RL = 54 Ω, See Figure 6-1; printed max is VCC 6
Differential output voltage with common-mode loading /VOD/ 1.5 2.2 V Vtest = −7 V to 12 V, See Figure 6-2; printed max is VCC 6
Change in magnitude of differential output voltage ΔVOD -0.2 0.2 V See Figure 6-1 6
Steady-state common-mode output voltage VOC(SS) 1 3 V 6
Change in steady-state common-mode output voltage ΔVOC(SS) -0.2 0.2 V See Figure 6-1 and Figure 6-4 6
Peak-to-peak change in common-mode output voltage during state transitions VOC(PP) 0.8 V 6
High-level input current (D, DE) IIH 50 μA VI = 2.4 V 6
Low-level input current (D, DE) IIL -50 μA VI = 0.4 V 6
Short-circuit output current IOS -250 250 mA VO = −7 V to 12 V 6
Supply current, SN75LBC182 (driver enabled) ICC 12 25 mA No load, DE at VCC, RE at VCC 6
Positive-going input threshold voltage VIT+ 0.2 V 6
Negative-going input threshold voltage VIT− -0.2 V 6
Hysteresis voltage (VIT+ − VIT-) Vhys 70 mV 6
Enable-input clamp voltage VIK -1.5 V II = −18 mA 6
High-level output voltage VOH 2.8 V VID = 200 mV, IO = −8 mA, See Figure 6-7 6
Low-level output voltage VOL 0.4 V VID = 200 mV, IO = 4 mA, See Figure 6-7 6
High-impedance-state output current IOZ -1 1 μA VO = 0.4 to 2.4 V 7
Bus input current II 250 μA VIH = 12 V, VCC = 5 V, other input at 0 V 7
Bus input current II -200 μA VIH = −7 V, VCC = 5 V, other input at 0 V 7
High-level input current (RE) IIH 50 μA VIH = 2 V 7
Low-level input current (RE) IIL -50 μA VIL = 0.8 V 7
Supply current, receiver enabled with DE low and RE low ICC 3.5 mA No load, DE at 0 V, RE at 0 V 7
Supply current, DE low and RE high (disabled) ICC 175 250 μA No load, DE at 0 V, RE at VCC 7
Differential output signal rise time tr 0.25 0.72 1.2 μs RL = 54 Ω, CL = 50 pF, See Figure 6-3 7
Differential output signal fall time tf 0.25 0.73 1.2 μs RL = 54 Ω, CL = 50 pF, See Figure 6-3 7
Propagation delay time, low-to-high-level output tPLH 1.3 μs RL = 54 Ω, CL = 50 pF, See Figure 6-3 7
Propagation delay time, high-to-low-level output tPHL 1.3 μs RL = 54 Ω, CL = 50 pF, See Figure 6-3 7
Pulse skew (tPHL − tPLH) tsk(p) 0.075 0.15 μs RL = 54 Ω, CL = 50 pF, See Figure 6-3 7
Output enable time to high level tPZH 3.5 μs RL = 110 Ω, See Figure 6-5 7
Output disable time from high level tPHZ 3.5 μs RL = 110 Ω, See Figure 6-5 7
Output enable time to low level tPZL 3.5 μs RL = 110 Ω, See Figure 6-6 7
Output disable time from low level tPLZ 3.5 μs RL = 110 Ω, See Figure 6-6 7
Differential output signal rise time (receiver) tr 20 ns CL = 50 pF, See Figure 6-7 7
Differential output signal fall time (receiver) tf 20 ns CL = 50 pF, See Figure 6-7 7
Propagation delay time, low-to-high-level output (receiver) tPLH 150 ns CL = 50 pF, See Figure 6-7 7
Propagation delay time, high-to-low-level output (receiver) tPHL 150 ns CL = 50 pF, See Figure 6-7 7
Output enable time to high level (receiver) tPZH 100 ns See Figure 6-8 7
Output enable time to low level (receiver) tPZL 100 ns See Figure 6-8 7
Output disable time from high level (receiver) tPHZ 100 ns See Figure 6-8 7
Output disable time from low level (receiver) tPLZ 100 ns See Figure 6-8 7
Pulse skew /tPHL − tPLH/ (receiver) tsk(p) 50 ns 7

CAD (KiCad official)

  • Symbol: SN75LBC182P
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: sn75lbc182p-etched.step / sn75lbc182p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn75lbc182p.step / sn75lbc182p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 f83ef4d9e449a65f, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF