main
History Download
Ray Publish 0.1.0 c0ff3a5

SN75LBC176P

Texas Instruments · RS-485 / RS-422 ICs · PDIP-8

SN75LBC176P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output Logic output carrying RS-485 receive data; it goes high impedance when the receiver is disabled with RE high.
2 RE input Active-low receiver enable/disable input; the receiver is enabled when RE is low and its output is high impedance when RE is high.
3 DE input Active-high driver enable/disable input; the driver outputs are high impedance when DE is low.
4 D input Logic input for RS-485 driver data; with DE high, A is driven high and B low when D is high, and the reverse when D is low.
5 GND power_in Network ground terminal; all voltages except the differential bus voltage are referenced to this pin.
6 A bidirectional Non-inverting RS-485 bus pin; recommended voltage at any bus terminal is -7 V to 12 V, with differential voltage measured at A with respect to B.
7 B bidirectional Inverting RS-485 bus pin; recommended voltage at any bus terminal is -7 V to 12 V, with differential voltage measured at A with respect to B.
8 VCC power_in 5-V supply voltage; recommended range is 4.75 V to 5.25 V, with absolute maximum of 7 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 7 V 4
Voltage range at any bus terminal -10 15 V 4
Input voltage (D, DE, R, RE) VI -0.3 V Upper limit printed as VCC + 0.5 V 4
Receiver output current IO -10 10 mA Receiver 4
Storage temperature range Tstg -65 150 °C 4
Supply voltage VCC 4.75 5 5.25 V 4
Voltage at any bus terminal (separately or common mode) VI or VIC -7 12 V 4
High-level input voltage VIH 2 V D, DE, and RE 4
Low-level input voltage VIL 0.8 V D, DE, and RE 4
Differential input voltage VID -12 12 V 4
High-level output current, driver IOH -60 mA Driver 4
High-level output current, receiver IOH -400 µA Receiver 4
Low-level output current, driver IOL 60 mA Driver 4
Low-level output current, receiver IOL 8 mA Receiver 4
Junction temperature TJ 140 °C 4
Operating free-air temperature (SN75LBC176) TA 0 70 °C 4
Power rating (P package) 840 mW TA < 25°C 5
Input clamp voltage VIK -1.5 V II = -18 mA 5
Output voltage VO 0 6 V IO = 0 5
Differential output voltage /VOD1/ 1.5 6 V IO = 0 5
Differential output voltage (RL = 54 Ω) /VOD2/ 1.5 5 V RL = 54 Ω, See Figure 7-1 5
Differential output voltage (test termination) /VOD3/ 1.5 5 V Vtest = -7 V to 12 V, See Figure 2 5
Change in magnitude of differential output voltage Δ/VOD/ -0.2 0.2 V RL = 54 Ω or 100 Ω, See Figure 7-1 5
Common-mode output voltage VOC -1 3 V 5
Change in magnitude of common-mode output voltage Δ/VOC/ -0.2 0.2 V 5
Output current (output disabled) IO 1 mA Output disabled; VO = 12 V 5
Output current (output disabled) IO -0.8 mA Output disabled; VO = -7 V 5
High-level input current IIH -100 µA VI = 2.4 V 5
Low-level input current IIL -100 µA VI = 0.4 V 5
Short circuit output current IOS -250 mA VO = −7 V 6
Short circuit output current IOS -150 mA VO = 0 6
Short circuit output current IOS 250 mA VO = VCC 6
Supply current (receiver disabled and driver enabled) ICC 1.5 mA VI = 0 or VCC, No load; receiver disabled and driver enabled 6
Supply current (receiver and driver disabled) ICC 0.2 mA VI = 0 or VCC, No load; receiver and driver disabled 6
Positive-going input threshold voltage VIT+ 0.2 V VO = 2.7 V, IO = -0.4 mA 8
Negative-going input threshold voltage VIT- -0.2 V VO = 0.5 V, IO = 8 mA 8
Enable-input clamp voltage VIK -1.5 V II = -18 mA 8
High-level output voltage VOH 2.7 V VID = 200 mV, IOH = -400 µA, See Figure 7-6 8
Low-level output voltage VOL 0.45 V VID = −200 mV, IOL = 8 mA, See Figure 7-6 8
High-impedance-state output current IOZ -20 20 µA VO = 0.4 V to 2.4 V 8
Line input current II 1 mA Other input = 0 V; VI = 12 V 8
Line input current II -0.8 mA Other input = 0 V; VI = -7 V 8
High-level enable-input current IIH -100 µA VIH = 2.7 V 8
Low-level enable-input current IIL -100 µA VIL = 0.4 V 8
Supply current (receiver enabled and driver disabled) ICC 3.9 mA VI = 0 or VCC, No load; receiver enabled and driver disabled 8
Supply current (receiver and driver disabled) ICC 0.2 mA VI = 0 or VCC, No load; receiver and driver disabled 8
Differential output delay time td(OD) 8 25 ns RL = 54 Ω, CL = 50 pF, See Figure 7-3 7
Output enable time to high level tPZH 35 ns RL = 110 Ω, See Figure 7-4 7
Output enable time to low level tPZL 35 ns RL = 110 Ω, See Figure 7-5 7
Output disable time from high level tPHZ 60 ns RL = 110 Ω, See Figure 7-4 7
Output disable time from low level tPLZ 35 ns RL = 110 Ω, See Figure 7-5 7
Propagation delay time, low- to high-level single-ended output tPLH 11 33 ns CL = 15 pF; VID = -1.5 V to 1.5 V, See Figure 7-7 8
Propagation delay time, high- to low-level single-ended output tPHL 11 33 ns CL = 15 pF; VID = -1.5 V to 1.5 V, See Figure 7-7 8
Pulse skew (/tPLH, tPHL/) tsk(p) 3 6 ns CL = 15 pF 8
Output enable time to high level tPZH 35 ns CL = 15 pF, See Figure 7-8 8
Output enable time to low level tPZL 30 ns CL = 15 pF, See Figure 7-8 8
Output disable time from high level tPHZ 35 ns CL = 15 pF, See Figure 7-8 8
Output disable time from low level tPLZ 30 ns CL = 15 pF, See Figure 7-8 8
Junction-to-ambient thermal resistance (P package) RθJA 65.6 °C/W P package, 8 pins 5
Junction-to-case (top) thermal resistance (P package) RθJC(top) 54.6 °C/W P package, 8 pins 5

CAD (KiCad official)

  • Symbol: SN75LBC176P
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: sn75lbc176p-etched.step / sn75lbc176p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn75lbc176p.step / sn75lbc176p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 a708c623b041ca86, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF