main
Ray
Publish 0.1.0
91c2713
SN75LBC031DR
Texas Instruments · CAN Transceivers · SOIC-8
SN75LBC031DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TX | input | Transmitter data input: low drives the bus dominant, while high or floating gives the recessive state, with VIH of 2 V minimum and VIL of 0.8 V maximum and an internal pullup that holds a defined output during power-up and controller reset. |
| 2 | GND | power_in | Ground reference terminal; all voltages except the differential bus voltage are measured with respect to GND. |
| 3 | VCC | power_in | Logic supply voltage, specified at 4.5 V minimum, 5 V nominal, and 5.5 V maximum. |
| 4 | RX | output | Receiver output that reports the differential bus state, with VOH of at least VCC - 0.5 V at IOH = -400 µA and VOL of at most 0.5 V at IOL = 1 mA. |
| 5 | REF | output | Reference source output at 0.45 VCC to 0.55 VCC for IREF = ±20 µA, with an output resistance of 5 to 10 kΩ. |
| 6 | CANL | bidirectional | Low-side CAN bus output driver, short-circuit protected to battery voltage and ground, with IO(ssL) of 140 mA minimum and 250 mA maximum. |
| 7 | CANH | bidirectional | High-side CAN bus output driver, short-circuit protected to battery voltage and ground, with IO(ssH) of -95 mA minimum and -200 mA maximum. |
| 8 | ASC | input | Adjustable slope control: leave open or tie to GND for 500 kBaud operation, or tie to VCC to increase bus transition times for 125 kBaud operation, with VIH of 2.4 V minimum and VIL of 0.4 V maximum for the input levels in the datasheet. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SN75LBC031DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sn75lbc031dr-etched.step/sn75lbc031dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn75lbc031dr.step/sn75lbc031dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
9c627ef1bbbd44ff, retrieved 2026-10-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN75LBC031DR
**Texas Instruments** · CAN Transceivers · SOIC-8
SN75LBC031DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TX | input | Transmitter data input: low drives the bus dominant, while high or floating gives the recessive state, with VIH of 2 V minimum and VIL of 0.8 V maximum and an internal pullup that holds a defined output during power-up and controller reset. |
| 2 | GND | power_in | Ground reference terminal; all voltages except the differential bus voltage are measured with respect to GND. |
| 3 | VCC | power_in | Logic supply voltage, specified at 4.5 V minimum, 5 V nominal, and 5.5 V maximum. |
| 4 | RX | output | Receiver output that reports the differential bus state, with VOH of at least VCC - 0.5 V at IOH = -400 µA and VOL of at most 0.5 V at IOL = 1 mA. |
| 5 | REF | output | Reference source output at 0.45 VCC to 0.55 VCC for IREF = ±20 µA, with an output resistance of 5 to 10 kΩ. |
| 6 | CANL | bidirectional | Low-side CAN bus output driver, short-circuit protected to battery voltage and ground, with IO(ssL) of 140 mA minimum and 250 mA maximum. |
| 7 | CANH | bidirectional | High-side CAN bus output driver, short-circuit protected to battery voltage and ground, with IO(ssH) of -95 mA minimum and -200 mA maximum. |
| 8 | ASC | input | Adjustable slope control: leave open or tie to GND for 500 kBaud operation, or tie to VCC to increase bus transition times for 125 kBaud operation, with VIH of 2.4 V minimum and VIL of 0.4 V maximum for the input levels in the datasheet. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `SN75LBC031DR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `sn75lbc031dr-etched.step` / `sn75lbc031dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn75lbc031dr.step` / `sn75lbc031dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn75lbc031.pdf) (19 pp, sha256 `9c627ef1bbbd44ff`, retrieved 2026-10-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn75lbc031dr-datasheet.pdf)