main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sn75lbc031dr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sn75lbc031dr-etched.glb sn75lbc031dr: factory component page (tier=mfr) · Ray
sn75lbc031dr-etched.step sn75lbc031dr: factory component page (tier=mfr) · Ray
sn75lbc031dr-hero.glb sn75lbc031dr: hero GLB from the etched model (keeps the MPN mark) · Ray
sn75lbc031dr-hero.overlay.json Publish 0.1.0 · Ray
sn75lbc031dr.glb Publish 0.1.0 · Ray
sn75lbc031dr.kicad_mod Publish 0.1.0 · Ray
sn75lbc031dr.kicad_sym Publish 0.1.0 · Ray
sn75lbc031dr.lbr Publish 0.1.0 · Ray
sn75lbc031dr.step Publish 0.1.0 · Ray

SN75LBC031DR

Texas Instruments · CAN Transceivers · SOIC-8

SN75LBC031DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TX input Transmitter data input: low drives the bus dominant, while high or floating gives the recessive state, with VIH of 2 V minimum and VIL of 0.8 V maximum and an internal pullup that holds a defined output during power-up and controller reset.
2 GND power_in Ground reference terminal; all voltages except the differential bus voltage are measured with respect to GND.
3 VCC power_in Logic supply voltage, specified at 4.5 V minimum, 5 V nominal, and 5.5 V maximum.
4 RX output Receiver output that reports the differential bus state, with VOH of at least VCC - 0.5 V at IOH = -400 µA and VOL of at most 0.5 V at IOL = 1 mA.
5 REF output Reference source output at 0.45 VCC to 0.55 VCC for IREF = ±20 µA, with an output resistance of 5 to 10 kΩ.
6 CANL bidirectional Low-side CAN bus output driver, short-circuit protected to battery voltage and ground, with IO(ssL) of 140 mA minimum and 250 mA maximum.
7 CANH bidirectional High-side CAN bus output driver, short-circuit protected to battery voltage and ground, with IO(ssH) of -95 mA minimum and -200 mA maximum.
8 ASC input Adjustable slope control: leave open or tie to GND for 500 kBaud operation, or tie to VCC to increase bus transition times for 125 kBaud operation, with VIH of 2.4 V minimum and VIL of 0.4 V maximum for the input levels in the datasheet.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Interface
Pins 8

CAD (KiCad official)

  • Symbol: SN75LBC031DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sn75lbc031dr-etched.step / sn75lbc031dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn75lbc031dr.step / sn75lbc031dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (19 pp, sha256 9c627ef1bbbd44ff, retrieved 2026-10-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF