main
History Download
Ray Publish 0.1.0 be6a216

SN75C1167DBR

Texas Instruments · RS-485 / RS-422 ICs · SSOP-16-208mil

SN75C1167DBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1B input Inverting input of the channel 1 differential receiver.
2 1A input Non-inverting input of the channel 1 differential receiver.
3 1R output Single-ended receiver output for channel 1.
4 RE input Active-low receiver enable input for channels 1 and 2.
5 2R output Single-ended receiver output for channel 2.
6 2A input Non-inverting input of the channel 2 differential receiver (printed as channel 1 in the datasheet).
7 2B input Inverting input of the channel 2 differential receiver.
8 GND power_in Device ground; the network ground reference for all voltages.
9 2D input Single-ended driver input for channel 2.
10 2Y output Non-inverting output of the channel 2 differential driver.
11 2Z output Inverting output of the channel 2 differential driver.
12 DE input Active-high driver enable input for channels 1 and 2.
13 1Z output Inverting output of the channel 1 differential driver.
14 1Y output Non-inverting output of the channel 1 differential driver.
15 1D input Single-ended driver input for channel 1.
16 VCC power_in Device supply; connect a 4.5 V to 5.5 V source between this pin and device ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-16-208mil
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.5 7 V 5
Input voltage range, A or B receiver VI -11 14 V Receiver 5
Differential input voltage range VID -14 14 V Receiver 5
Output voltage range VO -0.5 7 V Driver 5
Clamp current range IIK or IOK -20 20 mA Driver 5
Output current range IO -150 150 mA Driver 5
Output current range IO -25 25 mA Receiver 5
Supply current ICC 200 mA 5
GND current -200 mA 5
Operating virtual junction temperature TJ 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Supply voltage VCC 4.5 5 5.5 V 5
Common-mode input voltage VIC -7 7 V Receiver 5
Differential input voltage VID -7 7 V Receiver 5
High-level input voltage VIH 2 V Except A, B 5
Low-level input voltage VIL 0.8 V Except A, B 5
High-level output current IOH -6 mA Receiver 5
High-level output current IOH -20 mA Driver 5
Low-level output current IOL 6 mA Receiver 5
Low-level output current IOL 20 mA Driver 5
Operating free-air temperature, SN75C1167 TA 0 70 °C SN75C1167 6
Input clamp voltage VIK -1.5 V II = −18mA 6
High-level output voltage VOH 2.4 3.4 V VIH = 2V, VIL = 0.8V, IOH = −20mA 6
Low-level output voltage VOL 0.2 0.4 V VIH = 2V, VIL = 0.8V, IOL = 20mA 6
Differential output voltage /VOD1/ 2 6 V IO = 0mA 6
Differential output voltage /VOD2/ 2 3.1 V RL = 100Ω, See Figure 6-1 6
Common-mode output voltage VOC -3 3 V 6
Output current with power off IO(OFF) 100 µA VCC = 0V, VO = 6V 6
Output current with power off IO(OFF) -100 µA VCC = 0V, VO = −0.25V 6
High-impedance-state output current IOZ 20 µA VO = 2.5 6
High-impedance-state output current IOZ -20 µA VO = 5 6
High-level input current IIH 1 µA VI = VCC or VIH 6
Low-level input current IIL -1 µA VI = GND or VIL 6
Short-circuit output current IOS -150 -30 mA VO = VCC or GND 6
Supply current (total package) ICC 4 6 mA No load, Enabled, VI = VCC or GND 6
Supply current (total package) ICC 5 9 mA No load, Enabled, VI = 2.4 or 0.5V 6
Propagation delay time, high- to low-level output tPHL 7 12 ns R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is open 7
Propagation delay time, low- to high-level output tPLH 7 12 ns R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is open 7
Pulse skew tsk(p) 0.5 4 ns 7
Rise time tr 5 10 ns R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is open 7
Output enable time to high level tPZH 10 19 ns R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is closed 7
Output disable time from low level tPHZ 7 16 ns R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is closed 7
Output disable time from high level tPLZ 7 16 ns R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is closed 7
Positive-going input threshold voltage, differential input VIT+ 0.2 V 7
Negative-going input threshold voltage, differential input VIT- -0.2 V 7
Input clamp voltage, RE VIK -1.5 V SN75C1167, II = −18 mA 7
High-level output voltage VOH 3.8 4.2 V VID = 200 mV, IOH = −6 mA 7
Low-level output voltage VOL 0.1 0.3 V VID = −200 mV, IOL = 6 mA 7
High-impedance-state output current IOZ -5 5 µA SN75C1167 VO = VCC or GND 7
Line input current II 1.5 mA Other input at 0 V, VI = 10 V 7
Line input current II -2.5 mA Other input at 0 V, VI = −10 V 7
Input resistance ri 4 17 kΩ VIC = −7 V to 7 V, Other input at 0 V 7
Supply current (total package) ICC 4 6 mA No load, Enabled, VI = VCC or GND 7
Supply current (total package) ICC 5 9 mA VIH = 2.4 V or 0.5 V 7
Propagation delay time, low- to high-level output tPLH 9 17 27 ns See Figure 6-5 8
Transition time, low- to high-level output tTLH 4 9 ns VIC = 0V, See Figure 6-5 8
Output enable time to high level tPZH 13 22 ns RL = 1kW, See Figure 6-6 8
Output disable time from high level tPHZ 13 22 ns RL = 1kW, See Figure 6-6 8
Junction-to-ambient thermal resistance (DB SSOP, 16 pins) RθJA 102.6 °C/W 6
Junction-to-board thermal resistance (DB SSOP, 16 pins) RθJB 54.3 °C/W 6

CAD (KiCad official)

  • Symbol: SN75C1167DBR
  • Footprint: Package_SO:SSOP-16_5.3x6.2mm_P0.65mm
  • 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
  • 3D model files: sn75c1167dbr-etched.step / sn75c1167dbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn75c1167dbr.step / sn75c1167dbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 8a4c2be555e028b7, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF