Generated by kicad-footprint-generator · KiCad file format 20260206
SN75C1167DBR
Texas Instruments · RS-485 / RS-422 ICs · SSOP-16-208mil
SN75C1167DBR from Texas Instruments, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Inverting input of the channel 1 differential receiver. |
| 2 | 1A | input | Non-inverting input of the channel 1 differential receiver. |
| 3 | 1R | output | Single-ended receiver output for channel 1. |
| 4 | RE | input | Active-low receiver enable input for channels 1 and 2. |
| 5 | 2R | output | Single-ended receiver output for channel 2. |
| 6 | 2A | input | Non-inverting input of the channel 2 differential receiver (printed as channel 1 in the datasheet). |
| 7 | 2B | input | Inverting input of the channel 2 differential receiver. |
| 8 | GND | power_in | Device ground; the network ground reference for all voltages. |
| 9 | 2D | input | Single-ended driver input for channel 2. |
| 10 | 2Y | output | Non-inverting output of the channel 2 differential driver. |
| 11 | 2Z | output | Inverting output of the channel 2 differential driver. |
| 12 | DE | input | Active-high driver enable input for channels 1 and 2. |
| 13 | 1Z | output | Inverting output of the channel 1 differential driver. |
| 14 | 1Y | output | Non-inverting output of the channel 1 differential driver. |
| 15 | 1D | input | Single-ended driver input for channel 1. |
| 16 | VCC | power_in | Device supply; connect a 4.5 V to 5.5 V source between this pin and device ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-208mil |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 7 | V | 5 | ||
| Input voltage range, A or B receiver | VI | -11 | 14 | V | Receiver | 5 | |
| Differential input voltage range | VID | -14 | 14 | V | Receiver | 5 | |
| Output voltage range | VO | -0.5 | 7 | V | Driver | 5 | |
| Clamp current range | IIK or IOK | -20 | 20 | mA | Driver | 5 | |
| Output current range | IO | -150 | 150 | mA | Driver | 5 | |
| Output current range | IO | -25 | 25 | mA | Receiver | 5 | |
| Supply current | ICC | 200 | mA | 5 | |||
| GND current | -200 | mA | 5 | ||||
| Operating virtual junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 5 | |
| Common-mode input voltage | VIC | -7 | 7 | V | Receiver | 5 | |
| Differential input voltage | VID | -7 | 7 | V | Receiver | 5 | |
| High-level input voltage | VIH | 2 | V | Except A, B | 5 | ||
| Low-level input voltage | VIL | 0.8 | V | Except A, B | 5 | ||
| High-level output current | IOH | -6 | mA | Receiver | 5 | ||
| High-level output current | IOH | -20 | mA | Driver | 5 | ||
| Low-level output current | IOL | 6 | mA | Receiver | 5 | ||
| Low-level output current | IOL | 20 | mA | Driver | 5 | ||
| Operating free-air temperature, SN75C1167 | TA | 0 | 70 | °C | SN75C1167 | 6 | |
| Input clamp voltage | VIK | -1.5 | V | II = −18mA | 6 | ||
| High-level output voltage | VOH | 2.4 | 3.4 | V | VIH = 2V, VIL = 0.8V, IOH = −20mA | 6 | |
| Low-level output voltage | VOL | 0.2 | 0.4 | V | VIH = 2V, VIL = 0.8V, IOL = 20mA | 6 | |
| Differential output voltage | /VOD1/ | 2 | 6 | V | IO = 0mA | 6 | |
| Differential output voltage | /VOD2/ | 2 | 3.1 | V | RL = 100Ω, See Figure 6-1 | 6 | |
| Common-mode output voltage | VOC | -3 | 3 | V | 6 | ||
| Output current with power off | IO(OFF) | 100 | µA | VCC = 0V, VO = 6V | 6 | ||
| Output current with power off | IO(OFF) | -100 | µA | VCC = 0V, VO = −0.25V | 6 | ||
| High-impedance-state output current | IOZ | 20 | µA | VO = 2.5 | 6 | ||
| High-impedance-state output current | IOZ | -20 | µA | VO = 5 | 6 | ||
| High-level input current | IIH | 1 | µA | VI = VCC or VIH | 6 | ||
| Low-level input current | IIL | -1 | µA | VI = GND or VIL | 6 | ||
| Short-circuit output current | IOS | -150 | -30 | mA | VO = VCC or GND | 6 | |
| Supply current (total package) | ICC | 4 | 6 | mA | No load, Enabled, VI = VCC or GND | 6 | |
| Supply current (total package) | ICC | 5 | 9 | mA | No load, Enabled, VI = 2.4 or 0.5V | 6 | |
| Propagation delay time, high- to low-level output | tPHL | 7 | 12 | ns | R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is open | 7 | |
| Propagation delay time, low- to high-level output | tPLH | 7 | 12 | ns | R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is open | 7 | |
| Pulse skew | tsk(p) | 0.5 | 4 | ns | 7 | ||
| Rise time | tr | 5 | 10 | ns | R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is open | 7 | |
| Output enable time to high level | tPZH | 10 | 19 | ns | R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is closed | 7 | |
| Output disable time from low level | tPHZ | 7 | 16 | ns | R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is closed | 7 | |
| Output disable time from high level | tPLZ | 7 | 16 | ns | R1 = R2 = 50Ω, C1 = C2 = C3 = 40pF, R3 = 500Ω, S1 is closed | 7 | |
| Positive-going input threshold voltage, differential input | VIT+ | 0.2 | V | 7 | |||
| Negative-going input threshold voltage, differential input | VIT- | -0.2 | V | 7 | |||
| Input clamp voltage, RE | VIK | -1.5 | V | SN75C1167, II = −18 mA | 7 | ||
| High-level output voltage | VOH | 3.8 | 4.2 | V | VID = 200 mV, IOH = −6 mA | 7 | |
| Low-level output voltage | VOL | 0.1 | 0.3 | V | VID = −200 mV, IOL = 6 mA | 7 | |
| High-impedance-state output current | IOZ | -5 | 5 | µA | SN75C1167 VO = VCC or GND | 7 | |
| Line input current | II | 1.5 | mA | Other input at 0 V, VI = 10 V | 7 | ||
| Line input current | II | -2.5 | mA | Other input at 0 V, VI = −10 V | 7 | ||
| Input resistance | ri | 4 | 17 | kΩ | VIC = −7 V to 7 V, Other input at 0 V | 7 | |
| Supply current (total package) | ICC | 4 | 6 | mA | No load, Enabled, VI = VCC or GND | 7 | |
| Supply current (total package) | ICC | 5 | 9 | mA | VIH = 2.4 V or 0.5 V | 7 | |
| Propagation delay time, low- to high-level output | tPLH | 9 | 17 | 27 | ns | See Figure 6-5 | 8 |
| Transition time, low- to high-level output | tTLH | 4 | 9 | ns | VIC = 0V, See Figure 6-5 | 8 | |
| Output enable time to high level | tPZH | 13 | 22 | ns | RL = 1kW, See Figure 6-6 | 8 | |
| Output disable time from high level | tPHZ | 13 | 22 | ns | RL = 1kW, See Figure 6-6 | 8 | |
| Junction-to-ambient thermal resistance (DB SSOP, 16 pins) | RθJA | 102.6 | °C/W | 6 | |||
| Junction-to-board thermal resistance (DB SSOP, 16 pins) | RθJB | 54.3 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
SN75C1167DBR - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
- 3D model files:
sn75c1167dbr-etched.step/sn75c1167dbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn75c1167dbr.step/sn75c1167dbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
8a4c2be555e028b7, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).