main
Ray Publish 0.1.0 d0b120c
{
  "slug": "sn75176n",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI RS-485 / RS-422 ICs, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "sn75176n",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn75176n.kicad_sym",
    "sn75176n.kicad_mod",
    "sn75176n.glb",
    "sn75176n.step",
    "sn75176n.lbr",
    "docs/hero.png",
    "docs/sn75176n-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn75176n-hero.glb",
    "sn75176n-hero.overlay.json",
    "sn75176n-etched.glb"
  ],
  "component": {
    "mpn": "SN75176N",
    "manufacturer": "HGSEMI",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "RS-485 / RS-422 ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8770706881129910272",
    "parts": {
      "symbol": "sn75176n.kicad_sym",
      "footprint": "sn75176n.kicad_mod",
      "model_3d": "sn75176n-hero.glb",
      "model_3d_plain": "sn75176n-etched.glb",
      "model_3d_step": "sn75176n-etched.step",
      "model_3d_step_plain": "sn75176n.step",
      "lbr": "sn75176n.lbr"
    },
    "distributor_links": {
      "lcsc": "C2835217"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T22:27:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RO",
        "type": "output",
        "description": "Receiver output: with RE low, RO is driven high when A-B is at or above -50 mV and low when A-B is at or below -200 mV."
      },
      {
        "number": "2",
        "name": "RE",
        "type": "input",
        "description": "Receiver output enable, active low: RO is enabled when RE is low and goes high-impedance when RE is high, and with RE high and DE low the device enters low-power shutdown."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Driver output enable, active high: the driver outputs are enabled when DE is high and high-impedance when DE is low, and with RE high and DE low the device enters low-power shutdown."
      },
      {
        "number": "4",
        "name": "DI",
        "type": "input",
        "description": "Driver input: with DE high, a low on DI forces the non-inverting output low and the inverting output high, and a high on DI forces the non-inverting output high and the inverting output low."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "6",
        "name": "A",
        "type": "bidirectional",
        "description": "Receiver non-inverting input and driver non-inverting output on the RS-485 bus, with enhanced ESD protection (HBM ±2 kV, IEC 61000-4-2 contact and air discharge ±8 kV)."
      },
      {
        "number": "7",
        "name": "B",
        "type": "bidirectional",
        "description": "Receiver inverting input and driver inverting output on the RS-485 bus, with enhanced ESD protection (HBM ±2 kV, IEC 61000-4-2 contact and air discharge ±8 kV)."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, specified for 4.5 V to 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet covers DIP-8, SOP-8 and MSOP-8 variants with one shared pin table (page 3). The orderi; Pin descriptions are translated from the Chinese datasheet. The A and B ESD ratings are taken from t"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0517,
        "at": "2026-10-18T22:25:26"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8770706881129910272",
        "pages": 13,
        "sha256": "8e5fdac042fb5787",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn75176n.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn75176n-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "efc12be2fcc40e93841fd232f81bf3da039de34f60047131921343eb2a056a12",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}