main
History Download
Ray Publish 0.1.0 0f13d64

SN74V245-7PAG

Texas Instruments · FIFOs Memory · TQFP-64(10x10)

SN74V245-7PAG from Texas Instruments, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D0 input Data input bit D0 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
2 D1 input Data input bit D1 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
3 D2 input Data input bit D2 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
4 D3 input Data input bit D3 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
5 D4 input Data input bit D4 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
6 D5 input Data input bit D5 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
7 D6 input Data input bit D6 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
8 D7 input Data input bit D7 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
9 D8 input Data input bit D8 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
10 D9 input Data input bit D9 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
11 D10 input Data input bit D10 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
12 D11 input Data input bit D11 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
13 D12 input Data input bit D12 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
14 D13 input Data input bit D13 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
15 D14 input Data input bit D14 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
16 D15 input Data input bit D15 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
17 PAE output Programmable almost-empty flag; goes low when the FIFO is almost empty based on the programmed offset (default 127 from empty for SN74V245).
18 FL input Mode selection input which, with WXI and RXI, selects standard or FWFT mode and synchronous or asynchronous PAE/PAF flags; grounded on the first device in daisy-chain depth expansion.
19 WCLK input Write clock; when WEN is low, data is written into the FIFO on a low-to-high transition of WCLK if the FIFO is not full.
20 WEN input Write enable; when low, data is written on every low-to-high transition of WCLK, and it is ignored when the FIFO is full.
21 WXI input Width-expansion input which, with FL and RXI, selects the FIFO mode and PAE/PAF flag synchronization; connected to WXO of the previous device in depth expansion.
22 VCC power_in +3.3-V power supply pin.
23 PAF output Programmable almost-full flag; goes low when the FIFO is almost full based on the programmed offset (default 127 from full for SN74V245).
24 RXI input Read-expansion input which, with FL and WXI, selects the FIFO mode and PAE/PAF flag synchronization; connected to RXO of the previous device in depth expansion.
25 FF/IR output Full flag in standard mode (low when FIFO is full) or input-ready flag in FWFT mode (indicates space available for writing).
26 WXO/HF output Half-full flag in single-device or width-expansion configuration (low when more than half full); write-expansion output pulse in depth expansion.
27 RXO output Last-location-read flag; in depth expansion a pulse is sent to RXI of the next device when the last FIFO location is read.
28 Q0 output Data output bit Q0 of the 18-bit read bus; high-impedance when OE is high.
29 Q1 output Data output bit Q1 of the 18-bit read bus; high-impedance when OE is high.
30 GND power_in Ground pin.
31 Q2 output Data output bit Q2 of the 18-bit read bus; high-impedance when OE is high.
32 Q3 output Data output bit Q3 of the 18-bit read bus; high-impedance when OE is high.
33 VCC power_in +3.3-V power supply pin.
34 Q4 output Data output bit Q4 of the 18-bit read bus; high-impedance when OE is high.
35 GND power_in Ground pin.
36 Q5 output Data output bit Q5 of the 18-bit read bus; high-impedance when OE is high.
37 Q6 output Data output bit Q6 of the 18-bit read bus; high-impedance when OE is high.
38 Q7 output Data output bit Q7 of the 18-bit read bus; high-impedance when OE is high.
39 Q8 output Data output bit Q8 of the 18-bit read bus; high-impedance when OE is high.
40 GND power_in Ground pin.
41 Q9 output Data output bit Q9 of the 18-bit read bus; high-impedance when OE is high.
42 Q10 output Data output bit Q10 of the 18-bit read bus; high-impedance when OE is high.
43 VCC power_in +3.3-V power supply pin.
44 Q11 output Data output bit Q11 of the 18-bit read bus; high-impedance when OE is high.
45 Q12 output Data output bit Q12 of the 18-bit read bus; high-impedance when OE is high.
46 GND power_in Ground pin.
47 Q13 output Data output bit Q13 of the 18-bit read bus; high-impedance when OE is high.
48 Q14 output Data output bit Q14 of the 18-bit read bus; high-impedance when OE is high.
49 VCC power_in +3.3-V power supply pin.
50 Q15 output Data output bit Q15 of the 18-bit read bus; high-impedance when OE is high.
51 GND power_in Ground pin.
52 Q16 output Data output bit Q16 of the 18-bit read bus; high-impedance when OE is high.
53 Q17 output Data output bit Q17 of the 18-bit read bus; high-impedance when OE is high.
54 EF/OR output Empty flag in standard mode (low when FIFO is empty) or output-ready flag in FWFT mode (indicates valid data at outputs).
55 GND power_in Ground pin.
56 VCC power_in +3.3-V power supply pin.
57 RS input Reset input; when low, read and write pointers are reset, FF and PAF go high, and PAE and EF go low, and a reset is required after power-up before the first write.
58 OE input Output enable; when low the Q data output bus is active, and when high it is in the high-impedance state.
59 LD input Load control; when low with WEN low, data on D0-D11 is written to the offset registers on the low-to-high transition of WCLK.
60 REN input Read enable; when low, data is read from the FIFO on every low-to-high transition of RCLK, and it is ignored when the FIFO is empty.
61 RCLK input Read clock; when REN is low, data is read from the FIFO on a low-to-high transition of RCLK if the FIFO is not empty.
62 GND power_in Ground pin.
63 D16 input Data input bit D16 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.
64 D17 input Data input bit D17 of the 18-bit write bus, loaded on the low-to-high transition of WCLK when WEN is low.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TQFP-64(10x10)
Category Logic
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 3 3.3 3.6 V 37
Supply voltage GND 0 0 0 V 37
High-level input voltage VIH 2 5 V 37
Low-level input voltage VIL 0.8 V 37
Operating free-air temperature TA 0 70 °C 37
Supply voltage range VCC -0.5 5 V over operating free-air temperature range 37
Continuous output current IO -50 50 mA VO = 0 to VCC 37
Storage temperature range Tstg -55 125 °C 37
High-level output voltage VOH 2.4 V VCC = 3.0 V, IOH = -2 mA 37
Low-level output voltage VOL 0.4 V VCC = 3.0 V, IOL = 8 mA 37
Input current II -1 1 µA VCC = 3.6 V, VI = VCC to 0.4 V 37
Off-state output current IOZ -10 10 µA VCC = 3.6 V, OE ≥ VIH, VO = VCC to 0.4 V 37
Supply current ICC1 35 mA VCC = 3.3 V, See Notes 1, 2, and 3 37
Supply current ICC2 5 mA VCC = 3.6 V, See Notes 1 and 4 37
Input capacitance CIN 10 pF VI = 0, TA = 25°C, f = 1 MHz 37
Output capacitance COUT 10 pF VO = 0, TA = 25°C, f = 1 MHz, Output deselected, (OE ≥ VIH) 37
Clock cycle frequency fclock 133 MHz '74V245-7 38
Data access time tA 2 5 ns '74V245-7 38
Clock cycle time tCLK 7.5 ns '74V245-7 38
Clock high time tCLKH 3.5 ns '74V245-7 38
Clock low time tCLKL 3.5 ns '74V245-7 38
Data setup time tDS 2.5 ns '74V245-7 38
Data hold time tDH 0.5 ns '74V245-7 38
Enable setup time tENS 2.5 ns '74V245-7 38
Enable hold time tENH 0.5 ns '74V245-7 38
Load setup time tLDS 3.5 ns '74V245-7 38
Load hold time tLDH 0.5 ns '74V245-7 38
Reset pulse width tRS 10 ns '74V245-7 38
Reset setup time tRSS 8 ns '74V245-7 38
Reset recovery time tRSR 8 ns '74V245-7 38
Reset to flag and output time tRSF 15 ns '74V245-7 38
Output enable to output in low Z tOLZ 0 ns '74V245-7 38
Output enable to output valid tOE 6 ns '74V245-7 38
Output enable to output in high Z tOHZ 1 6 ns '74V245-7 38
Write clock to Full flag tWFF 5 ns '74V245-7 38
Read clock to Empty flag tREF 5 ns '74V245-7 38
Clock to asynchronous programmable Almost-Full flag tPAFA 12.5 ns '74V245-7 38
Write clock to synchronous programmable Almost-Full flag tPAFS 5 ns '74V245-7 38
Clock to asynchronous programmable Almost-Empty flag tPAEA 12.5 ns '74V245-7 38
Read clock to synchronous programmable Almost-Empty flag tPAES 5 ns '74V245-7 38
Clock to Half-Full flag tHF 12.5 ns '74V245-7 38
Clock to expansion out tXO 5 ns '74V245-7 38
Expansion in pulse duration tXI 2.5 ns '74V245-7 38
Expansion in setup time tXIS 2.5 ns '74V245-7 38
Skew time between read clock and write clock for FF/IR and EF/OR tSKEW1 5 ns '74V245-7 38
Skew time between read clock and write clock for PAE and PAF (synchronous only) tSKEW2 7 ns '74V245-7 38

CAD (KiCad official)

  • Symbol: SN74V245-7PAG
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: sn74v245-7pag-etched.step / sn74v245-7pag-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74v245-7pag.step / sn74v245-7pag.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (48 pp, sha256 0854662bbf248bdd, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF