main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn74ls74ansr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn74ls74ansr: viewers · Ray
package.json sn74ls74ansr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json sn74ls74ansr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/sn74ls74ansr · Ray
sn74ls74ansr-etched.fit.json sn74ls74ansr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74ls74ansr-etched.glb sn74ls74ansr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74ls74ansr-etched.step sn74ls74ansr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74ls74ansr.glb Publish 0.1.0 · Ray
sn74ls74ansr.kicad_mod Publish 0.1.0 · Ray
sn74ls74ansr.kicad_sym Publish 0.1.0 · Ray
sn74ls74ansr.lbr Publish 0.1.0 · Ray
sn74ls74ansr.step Publish 0.1.0 · Ray

SN74LS74ANSR

Texas Instruments · Flip Flops · SOP-14-208mil

SN74LS74ANSR from Texas Instruments, in a SOP-14-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ~1CLR input Active-low asynchronous clear input for flip-flop 1; when LOW, forces 1Q LOW and ~1Q HIGH independent of clock, data, or preset; IIH max 20 µA, IIL max −0.4 mA.
2 1D input Data input for flip-flop 1; logic state is transferred to 1Q on the positive edge of 1CLK when ~1PRE and ~1CLR are HIGH; IIH max 20 µA, IIL max −0.4 mA.
3 1CLK input Positive-edge-triggered clock input for flip-flop 1; maximum clock frequency 25 MHz; setup time before CLK↑ 20 ns, hold time after CLK↑ 5 ns.
4 ~1PRE input Active-low asynchronous preset input for flip-flop 1; when LOW, forces 1Q HIGH and ~1Q LOW independent of clock or data; IIH max 20 µA, IIL max −0.8 mA.
5 1Q output Q output of flip-flop 1; VOH min 2.4 V (IOH = −0.4 mA), VOL max 0.4 V (IOL = 4 mA), IOH max −0.4 mA, IOL max 4 mA.
6 ~1Q output Complement Q̄ output of flip-flop 1; always the logical inverse of 1Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 1Q.
7 GND power_in Ground reference (0 V) for all internal logic; all voltages measured with respect to this terminal.
8 ~2Q output Complement Q̄ output of flip-flop 2; always the logical inverse of 2Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 2Q.
9 2Q output Q output of flip-flop 2; VOH min 2.4 V (IOH = −0.4 mA), VOL max 0.4 V (IOL = 4 mA).
10 ~2PRE input Active-low asynchronous preset input for flip-flop 2; when LOW, forces 2Q HIGH and ~2Q LOW independent of clock or data; IIH max 20 µA, IIL max −0.8 mA.
11 2CLK input Positive-edge-triggered clock input for flip-flop 2; maximum clock frequency 25 MHz; setup time before CLK↑ 20 ns, hold time after CLK↑ 5 ns.
12 2D input Data input for flip-flop 2; logic state is transferred to 2Q on the positive edge of 2CLK when ~2PRE and ~2CLR are HIGH; IIH max 20 µA, IIL max −0.4 mA.
13 ~2CLR input Active-low asynchronous clear input for flip-flop 2; when LOW, forces 2Q LOW and ~2Q HIGH independent of clock, data, or preset; IIH max 20 µA, IIL max −0.4 mA.
14 VCC power_in Positive supply voltage; recommended operating range 4.5 V min to 5.25 V max for SN74LS74A; absolute maximum 7 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOP-14-208mil
Category Logic
Pins 14

CAD (KiCad official)

  • Symbol: SN74LS74ANSR
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14-208mil (KiCad packages3D, STEP)
  • 3D model files: sn74ls74ansr-etched.step / sn74ls74ansr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74ls74ansr.step / sn74ls74ansr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 3c67c755a4225573, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-4-6 (vision), consensus claude-opus-4-7 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF