component
SN74LS74ANSR
Public Made by Adomby adom
Texas Instruments Flip Flops, SOP-14-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+16−13@@ -53,37 +53,37 @@ "number": "1", "name": "~1CLR", "type": "input",- "description": "Active-low asynchronous clear input for flip-flop 1; when LOW, forces 1Q LOW and ~1Q HIGH independent of clock, data, or preset; IIH max 20 \u00b5A, IIL max \u22120.4 mA."+ "description": "Active-low asynchronous clear input for flip-flop 1; when LOW, forces 1Q LOW and ~1Q HIGH independent of clock, data, or preset; IIH max 20 µA, IIL max −0.4 mA." }, { "number": "2", "name": "1D", "type": "input",- "description": "Data input for flip-flop 1; logic state is transferred to 1Q on the positive edge of 1CLK when ~1PRE and ~1CLR are HIGH; IIH max 20 \u00b5A, IIL max \u22120.4 mA."+ "description": "Data input for flip-flop 1; logic state is transferred to 1Q on the positive edge of 1CLK when ~1PRE and ~1CLR are HIGH; IIH max 20 µA, IIL max −0.4 mA." }, { "number": "3", "name": "1CLK", "type": "input",- "description": "Positive-edge-triggered clock input for flip-flop 1; maximum clock frequency 25 MHz; setup time before CLK\u2191 20 ns, hold time after CLK\u2191 5 ns."+ "description": "Positive-edge-triggered clock input for flip-flop 1; maximum clock frequency 25 MHz; setup time before CLK↑ 20 ns, hold time after CLK↑ 5 ns." }, { "number": "4", "name": "~1PRE", "type": "input",- "description": "Active-low asynchronous preset input for flip-flop 1; when LOW, forces 1Q HIGH and ~1Q LOW independent of clock or data; IIH max 20 \u00b5A, IIL max \u22120.8 mA."+ "description": "Active-low asynchronous preset input for flip-flop 1; when LOW, forces 1Q HIGH and ~1Q LOW independent of clock or data; IIH max 20 µA, IIL max −0.8 mA." }, { "number": "5", "name": "1Q", "type": "output",- "description": "Q output of flip-flop 1; VOH min 2.4 V (IOH = \u22120.4 mA), VOL max 0.4 V (IOL = 4 mA), IOH max \u22120.4 mA, IOL max 4 mA."+ "description": "Q output of flip-flop 1; VOH min 2.4 V (IOH = −0.4 mA), VOL max 0.4 V (IOL = 4 mA), IOH max −0.4 mA, IOL max 4 mA." }, { "number": "6", "name": "~1Q", "type": "output",- "description": "Complement Q\u0304 output of flip-flop 1; always the logical inverse of 1Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 1Q."+ "description": "Complement Q̄ output of flip-flop 1; always the logical inverse of 1Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 1Q." }, { "number": "7",@@ -95,37 +95,37 @@ "number": "8", "name": "~2Q", "type": "output",- "description": "Complement Q\u0304 output of flip-flop 2; always the logical inverse of 2Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 2Q."+ "description": "Complement Q̄ output of flip-flop 2; always the logical inverse of 2Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 2Q." }, { "number": "9", "name": "2Q", "type": "output",- "description": "Q output of flip-flop 2; VOH min 2.4 V (IOH = \u22120.4 mA), VOL max 0.4 V (IOL = 4 mA)."+ "description": "Q output of flip-flop 2; VOH min 2.4 V (IOH = −0.4 mA), VOL max 0.4 V (IOL = 4 mA)." }, { "number": "10", "name": "~2PRE", "type": "input",- "description": "Active-low asynchronous preset input for flip-flop 2; when LOW, forces 2Q HIGH and ~2Q LOW independent of clock or data; IIH max 20 \u00b5A, IIL max \u22120.8 mA."+ "description": "Active-low asynchronous preset input for flip-flop 2; when LOW, forces 2Q HIGH and ~2Q LOW independent of clock or data; IIH max 20 µA, IIL max −0.8 mA." }, { "number": "11", "name": "2CLK", "type": "input",- "description": "Positive-edge-triggered clock input for flip-flop 2; maximum clock frequency 25 MHz; setup time before CLK\u2191 20 ns, hold time after CLK\u2191 5 ns."+ "description": "Positive-edge-triggered clock input for flip-flop 2; maximum clock frequency 25 MHz; setup time before CLK↑ 20 ns, hold time after CLK↑ 5 ns." }, { "number": "12", "name": "2D", "type": "input",- "description": "Data input for flip-flop 2; logic state is transferred to 2Q on the positive edge of 2CLK when ~2PRE and ~2CLR are HIGH; IIH max 20 \u00b5A, IIL max \u22120.4 mA."+ "description": "Data input for flip-flop 2; logic state is transferred to 2Q on the positive edge of 2CLK when ~2PRE and ~2CLR are HIGH; IIH max 20 µA, IIL max −0.4 mA." }, { "number": "13", "name": "~2CLR", "type": "input",- "description": "Active-low asynchronous clear input for flip-flop 2; when LOW, forces 2Q LOW and ~2Q HIGH independent of clock, data, or preset; IIH max 20 \u00b5A, IIL max \u22120.4 mA."+ "description": "Active-low asynchronous clear input for flip-flop 2; when LOW, forces 2Q LOW and ~2Q HIGH independent of clock, data, or preset; IIH max 20 µA, IIL max −0.4 mA." }, { "number": "14",@@ -212,5 +212,8 @@ "docs/sn74ls74ansr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }