component
SN74LS74ANSR
Public Made by Adomby adom
Texas Instruments Flip Flops, SOP-14-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# SN74LS74ANSR++**Texas Instruments** · Flip Flops · SOP-14-208mil++SN74LS74ANSR from Texas Instruments, in a SOP-14-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ~1CLR | input | Active-low asynchronous clear input for flip-flop 1; when LOW, forces 1Q LOW and ~1Q HIGH independent of clock, data, or preset; IIH max 20 µA, IIL max −0.4 mA. |+| 2 | 1D | input | Data input for flip-flop 1; logic state is transferred to 1Q on the positive edge of 1CLK when ~1PRE and ~1CLR are HIGH; IIH max 20 µA, IIL max −0.4 mA. |+| 3 | 1CLK | input | Positive-edge-triggered clock input for flip-flop 1; maximum clock frequency 25 MHz; setup time before CLK↑ 20 ns, hold time after CLK↑ 5 ns. |+| 4 | ~1PRE | input | Active-low asynchronous preset input for flip-flop 1; when LOW, forces 1Q HIGH and ~1Q LOW independent of clock or data; IIH max 20 µA, IIL max −0.8 mA. |+| 5 | 1Q | output | Q output of flip-flop 1; VOH min 2.4 V (IOH = −0.4 mA), VOL max 0.4 V (IOL = 4 mA), IOH max −0.4 mA, IOL max 4 mA. |+| 6 | ~1Q | output | Complement Q̄ output of flip-flop 1; always the logical inverse of 1Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 1Q. |+| 7 | GND | power_in | Ground reference (0 V) for all internal logic; all voltages measured with respect to this terminal. |+| 8 | ~2Q | output | Complement Q̄ output of flip-flop 2; always the logical inverse of 2Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 2Q. |+| 9 | 2Q | output | Q output of flip-flop 2; VOH min 2.4 V (IOH = −0.4 mA), VOL max 0.4 V (IOL = 4 mA). |+| 10 | ~2PRE | input | Active-low asynchronous preset input for flip-flop 2; when LOW, forces 2Q HIGH and ~2Q LOW independent of clock or data; IIH max 20 µA, IIL max −0.8 mA. |+| 11 | 2CLK | input | Positive-edge-triggered clock input for flip-flop 2; maximum clock frequency 25 MHz; setup time before CLK↑ 20 ns, hold time after CLK↑ 5 ns. |+| 12 | 2D | input | Data input for flip-flop 2; logic state is transferred to 2Q on the positive edge of 2CLK when ~2PRE and ~2CLR are HIGH; IIH max 20 µA, IIL max −0.4 mA. |+| 13 | ~2CLR | input | Active-low asynchronous clear input for flip-flop 2; when LOW, forces 2Q LOW and ~2Q HIGH independent of clock, data, or preset; IIH max 20 µA, IIL max −0.4 mA. |+| 14 | VCC | power_in | Positive supply voltage; recommended operating range 4.5 V min to 5.25 V max for SN74LS74A; absolute maximum 7 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOP-14-208mil |+| Category | Logic |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `SN74LS74ANSR`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOP-14-208mil (KiCad packages3D, STEP)+- 3D model files: `sn74ls74ansr-etched.step` / `sn74ls74ansr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ls74ansr.step` / `sn74ls74ansr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74ls74a) (30 pp, sha256 `3c67c755a4225573`, retrieved 2026-09-26, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-4-6` (vision), consensus `claude-opus-4-7` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74ls74ansr-datasheet.pdf)
page.jsonadded+195@@ -0,0 +1,195 @@+{+ "slug": "sn74ls74ansr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Flip Flops, SOP-14-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "sn74ls74ansr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn74ls74ansr.kicad_sym",+ "sn74ls74ansr.kicad_mod",+ "sn74ls74ansr.glb",+ "sn74ls74ansr.step",+ "sn74ls74ansr.lbr",+ "docs/hero.png",+ "docs/sn74ls74ansr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "SN74LS74ANSR",+ "manufacturer": "Texas Instruments",+ "package": "SOP-14-208mil",+ "pin_count": 14,+ "category": "Logic",+ "subcategory": "Flip Flops",+ "datasheet": "https://www.ti.com/cn/lit/gpn/sn74ls74a",+ "parts": {+ "symbol": "sn74ls74ansr.kicad_sym",+ "footprint": "sn74ls74ansr.kicad_mod",+ "model_3d": "sn74ls74ansr-etched.glb",+ "model_3d_plain": "sn74ls74ansr.glb",+ "model_3d_step": "sn74ls74ansr-etched.step",+ "model_3d_step_plain": "sn74ls74ansr.step",+ "lbr": "sn74ls74ansr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2677736",+ "digikey": "296-28880-2-ND",+ "mouser": "595-SN74LS74ANSR"+ },+ "distributor_check": {+ "checked_at": "2026-09-26T12:31:37Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-28880-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-SN74LS74ANSR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "~1CLR",+ "type": "input",+ "description": "Active-low asynchronous clear input for flip-flop 1; when LOW, forces 1Q LOW and ~1Q HIGH independent of clock, data, or preset; IIH max 20 µA, IIL max −0.4 mA."+ },+ {+ "number": "2",+ "name": "1D",+ "type": "input",+ "description": "Data input for flip-flop 1; logic state is transferred to 1Q on the positive edge of 1CLK when ~1PRE and ~1CLR are HIGH; IIH max 20 µA, IIL max −0.4 mA."+ },+ {+ "number": "3",+ "name": "1CLK",+ "type": "input",+ "description": "Positive-edge-triggered clock input for flip-flop 1; maximum clock frequency 25 MHz; setup time before CLK↑ 20 ns, hold time after CLK↑ 5 ns."+ },+ {+ "number": "4",+ "name": "~1PRE",+ "type": "input",+ "description": "Active-low asynchronous preset input for flip-flop 1; when LOW, forces 1Q HIGH and ~1Q LOW independent of clock or data; IIH max 20 µA, IIL max −0.8 mA."+ },+ {+ "number": "5",+ "name": "1Q",+ "type": "output",+ "description": "Q output of flip-flop 1; VOH min 2.4 V (IOH = −0.4 mA), VOL max 0.4 V (IOL = 4 mA), IOH max −0.4 mA, IOL max 4 mA."+ },+ {+ "number": "6",+ "name": "~1Q",+ "type": "output",+ "description": "Complement Q̄ output of flip-flop 1; always the logical inverse of 1Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 1Q."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0 V) for all internal logic; all voltages measured with respect to this terminal."+ },+ {+ "number": "8",+ "name": "~2Q",+ "type": "output",+ "description": "Complement Q̄ output of flip-flop 2; always the logical inverse of 2Q; VOH min 2.4 V, VOL max 0.4 V under same load conditions as 2Q."+ },+ {+ "number": "9",+ "name": "2Q",+ "type": "output",+ "description": "Q output of flip-flop 2; VOH min 2.4 V (IOH = −0.4 mA), VOL max 0.4 V (IOL = 4 mA)."+ },+ {+ "number": "10",+ "name": "~2PRE",+ "type": "input",+ "description": "Active-low asynchronous preset input for flip-flop 2; when LOW, forces 2Q HIGH and ~2Q LOW independent of clock or data; IIH max 20 µA, IIL max −0.8 mA."+ },+ {+ "number": "11",+ "name": "2CLK",+ "type": "input",+ "description": "Positive-edge-triggered clock input for flip-flop 2; maximum clock frequency 25 MHz; setup time before CLK↑ 20 ns, hold time after CLK↑ 5 ns."+ },+ {+ "number": "12",+ "name": "2D",+ "type": "input",+ "description": "Data input for flip-flop 2; logic state is transferred to 2Q on the positive edge of 2CLK when ~2PRE and ~2CLR are HIGH; IIH max 20 µA, IIL max −0.4 mA."+ },+ {+ "number": "13",+ "name": "~2CLR",+ "type": "input",+ "description": "Active-low asynchronous clear input for flip-flop 2; when LOW, forces 2Q LOW and ~2Q HIGH independent of clock, data, or preset; IIH max 20 µA, IIL max −0.4 mA."+ },+ {+ "number": "14",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage; recommended operating range 4.5 V min to 5.25 V max for SN74LS74A; absolute maximum 7 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-sonnet-4-6",+ "primary_mode": "vision",+ "consensus_model": "claude-opus-4-7",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet (SDLS119) does not contain a dedicated top-view diagram for the NS/NSR (SOP-14-208mil)",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 12,+ "cost_usd": 0.4387,+ "at": "2026-09-26T12:31:18"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/sn74ls74a",+ "pages": 30,+ "sha256": "3c67c755a4225573",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}