main
History Download
Ray Publish 0.1.0 36812be

SN74LS373NE4

Texas Instruments · Latches · PDIP-20

SN74LS373NE4 from Texas Instruments, in a PDIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OC input Active-low buffered output control; when OC is high the eight outputs are forced to the high-impedance state without affecting the latch contents.
2 1Q tri_state Latch or flip-flop 1 buffered 3-state bus-driving output, which can drive highly capacitive or low-impedance bus loads.
3 1D input Data input to latch or flip-flop 1, which is transferred to Q while C is high (latch) or on the rising clock edge (flip-flop).
4 2D input Data input to latch or flip-flop 2, which is transferred to Q while C is high (latch) or on the rising clock edge (flip-flop).
5 2Q tri_state Latch or flip-flop 2 buffered 3-state bus-driving output, which can drive highly capacitive or low-impedance bus loads.
6 3Q tri_state Latch or flip-flop 3 buffered 3-state bus-driving output, which can drive highly capacitive or low-impedance bus loads.
7 3D input Data input to latch or flip-flop 3, which is transferred to Q while C is high (latch) or on the rising clock edge (flip-flop).
8 4D input Data input to latch or flip-flop 4, which is transferred to Q while C is high (latch) or on the rising clock edge (flip-flop).
9 4Q tri_state Latch or flip-flop 4 buffered 3-state bus-driving output, which can drive highly capacitive or low-impedance bus loads.
10 GND power_in Ground reference for the device.
11 C input Enable input for the LS373 latches (transparent while high, latched on falling edge); CLK clock input for the LS374 flip-flops, which load D on the positive transition.
12 5Q tri_state Latch or flip-flop 5 buffered 3-state bus-driving output, which can drive highly capacitive or low-impedance bus loads.
13 5D input Data input to latch or flip-flop 5, which is transferred to Q while C is high (latch) or on the rising clock edge (flip-flop).
14 6D input Data input to latch or flip-flop 6, which is transferred to Q while C is high (latch) or on the rising clock edge (flip-flop).
15 6Q tri_state Latch or flip-flop 6 buffered 3-state bus-driving output, which can drive highly capacitive or low-impedance bus loads.
16 7Q tri_state Latch or flip-flop 7 buffered 3-state bus-driving output, which can drive highly capacitive or low-impedance bus loads.
17 7D input Data input to latch or flip-flop 7, which is transferred to Q while C is high (latch) or on the rising clock edge (flip-flop).
18 8D input Data input to latch or flip-flop 8, which is transferred to Q while C is high (latch) or on the rising clock edge (flip-flop).
19 8Q tri_state Latch or flip-flop 8 buffered 3-state bus-driving output, which can drive highly capacitive or low-impedance bus loads.
20 VCC power_in Positive supply voltage pin for the device.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-20
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.75 5 5.25 V 6
High-level output voltage VOH 5.5 V 6
High-level output current IOH -2.6 mA 6
Low-level output current IOL 24 mA 6
Pulse duration CLK high tw 15 ns CLK high 6
Pulse duration CLK low tw 15 ns CLK low 6
Data setup time ’LS373 tsu 5 ns ’LS373, clock edge as printed (↓) 6
Data setup time ’LS374 tsu 20 ns ’LS374, clock edge as printed (↑) 6
Data hold time ’LS373 th 20 ns ’LS373, clock edge as printed (↓) 6
Data hold time ’LS374 th 0 ns ’LS374, data frequency below 10 MHz 6
Operating free-air temperature TA 0 70 °C 6
Supply voltage VCC 7 V ’LS devices, with respect to network ground 6
Input voltage VI 7 V ’LS devices 6
Off-state output voltage 5.5 V 6
Package thermal impedance θJA 69 °C/W N package, per JESD 51-7 6
Storage temperature range Tstg -65 150 °C 6
High-level input voltage VIH 2 V 7
Low-level input voltage VIL 0.8 V 7
Input clamp voltage VIK -1.5 V VCC = MIN, II = -18 mA 7
High-level output voltage VOH 2.4 3.1 V VCC = MIN, VIH = 2 V, VIL = VIL max, IOH = MAX 7
Low-level output voltage VOL 0.25 0.4 V VCC = MIN, VIH = 2 V, VIL = VIL max, IOL = 12 mA 7
Low-level output voltage VOL 0.35 0.5 V VCC = MIN, VIH = 2 V, VIL = VIL max, IOL = 24 mA 7
Off-state output current, high-level voltage applied IOZH 20 µA VCC = MAX, VIH = 2 V, VO = 2.7 V 7
Off-state output current, low-level voltage applied IOZL -20 µA VCC = MAX, VIH = 2 V, VO = 0.4 V 7
Input current at maximum input voltage II 0.1 mA VCC = MAX, VI = 7 V 7
High-level input current IIH 20 µA VCC = MAX, VI = 2.7 V 7
Low-level input current IIL -0.4 mA VCC = MAX, VI = 0.4 V 7
Short-circuit output current IOS -130 -30 mA VCC = MAX 7
Supply current ’LS373 ICC 24 40 mA VCC = MAX, output control at 4.5 V, ’LS373 7
Supply current ’LS374 ICC 27 40 mA VCC = MAX, output control at 4.5 V, ’LS374 7
Maximum clock frequency fmax 35 50 MHz RL = 667 Ω, CL = 45 pF, see Note 3 7
Propagation delay Data to Any Q (tPLH) tPLH 12 18 ns RL = 667 Ω, CL = 45 pF, see Note 3 7
Propagation delay Data to Any Q (tPHL) tPHL 12 18 ns RL = 667 Ω, CL = 45 pF, see Note 3 7
Propagation delay C to Any Q ’LS373 (tPLH) tPLH 20 30 ns RL = 667 Ω, CL = 45 pF, see Note 3, ’LS373 7
Propagation delay C to Any Q ’LS373 (tPHL) tPHL 18 30 ns RL = 667 Ω, CL = 45 pF, see Note 3, ’LS373 7
Propagation delay CLK to Any Q ’LS374 (tPLH) tPLH 15 28 ns RL = 667 Ω, CL = 45 pF, see Note 3, ’LS374 7
Propagation delay CLK to Any Q ’LS374 (tPHL) tPHL 19 28 ns RL = 667 Ω, CL = 45 pF, see Note 3, ’LS374 7
Output enable time to high level ’LS373 tPZH 15 28 ns RL = 667 Ω, CL = 45 pF, see Note 3, ’LS373 7
Output enable time to high level ’LS374 tPZH 20 26 ns RL = 667 Ω, CL = 45 pF, see Note 3, ’LS374 7
Output enable time to low level ’LS373 tPZL 25 36 ns RL = 667 Ω, CL = 45 pF, see Note 3, ’LS373 7
Output enable time to low level ’LS374 tPZL 21 28 ns RL = 667 Ω, CL = 45 pF, see Note 3, ’LS374 7
Output disable time from high level ’LS373 tPHZ 15 25 ns RL = 667 Ω, CL = 5 pF, ’LS373 7
Output disable time from high level ’LS374 tPHZ 15 28 ns RL = 667 Ω, CL = 5 pF, ’LS374 7
Output disable time from low level ’LS373 tPLZ 12 20 ns RL = 667 Ω, CL = 5 pF, ’LS373 7
Output disable time from low level ’LS374 tPLZ 12 20 ns RL = 667 Ω, CL = 5 pF, ’LS374 7

CAD (KiCad official)

  • Symbol: SN74LS373NE4
  • Footprint: Package_DIP:DIP-20_W7.62mm
  • 3D model: PDIP-20 (KiCad packages3D, STEP)
  • 3D model files: sn74ls373ne4-etched.step / sn74ls373ne4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74ls373ne4.step / sn74ls373ne4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 b1dbdfcaba0d88c4, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF