main
Ray sn74ls251dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) c66fe7e
{
  "slug": "sn74ls251dr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Signal Switches, Multiplexers, Decoders, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic",
    "sn74ls251dr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74ls251dr.kicad_sym",
    "sn74ls251dr.kicad_mod",
    "sn74ls251dr.glb",
    "sn74ls251dr.step",
    "sn74ls251dr.lbr",
    "docs/hero.png",
    "docs/sn74ls251dr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "SN74LS251DR",
    "manufacturer": "Texas Instruments",
    "package": "SOP-16",
    "pin_count": 16,
    "category": "Logic",
    "subcategory": "Signal Switches, Multiplexers, Decoders",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74ls251.pdf",
    "parts": {
      "symbol": "sn74ls251dr.kicad_sym",
      "footprint": "sn74ls251dr.kicad_mod",
      "model_3d": "sn74ls251dr-etched.glb",
      "model_3d_plain": "sn74ls251dr.glb",
      "model_3d_step": "sn74ls251dr-etched.step",
      "model_3d_step_plain": "sn74ls251dr.step",
      "lbr": "sn74ls251dr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2878050"
    },
    "pins": [
      {
        "number": "1",
        "name": "D3",
        "type": "input",
        "description": "Data input 3, one of eight data inputs selected by the A, B, C select lines."
      },
      {
        "number": "2",
        "name": "D2",
        "type": "input",
        "description": "Data input 2, one of eight data inputs selected by the A, B, C select lines."
      },
      {
        "number": "3",
        "name": "D1",
        "type": "input",
        "description": "Data input 1, one of eight data inputs selected by the A, B, C select lines."
      },
      {
        "number": "4",
        "name": "D0",
        "type": "input",
        "description": "Data input 0, one of eight data inputs selected by the A, B, C select lines."
      },
      {
        "number": "5",
        "name": "Y",
        "type": "tri_state",
        "description": "True (non-inverted) three-state data output; goes to high-impedance when enable G-bar is high."
      },
      {
        "number": "6",
        "name": "W",
        "type": "output",
        "description": "Complementary (inverted) data output providing the inverse of the selected data input; standard totem-pole output (not three-state)."
      },
      {
        "number": "7",
        "name": "G",
        "type": "input",
        "description": "Active-low enable (strobe) input; must be low to enable the device, high forces both Y and W outputs (Y to high impedance)."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference supply pin."
      },
      {
        "number": "9",
        "name": "C",
        "type": "input",
        "description": "Data select binary input C, most significant bit of the 3-bit select code choosing one of eight data inputs."
      },
      {
        "number": "10",
        "name": "B",
        "type": "input",
        "description": "Data select binary input B, middle bit of the 3-bit select code choosing one of eight data inputs."
      },
      {
        "number": "11",
        "name": "A",
        "type": "input",
        "description": "Data select binary input A, least significant bit of the 3-bit select code choosing one of eight data inputs."
      },
      {
        "number": "12",
        "name": "D7",
        "type": "input",
        "description": "Data input 7, one of eight data inputs selected by the A, B, C select lines."
      },
      {
        "number": "13",
        "name": "D6",
        "type": "input",
        "description": "Data input 6, one of eight data inputs selected by the A, B, C select lines."
      },
      {
        "number": "14",
        "name": "D5",
        "type": "input",
        "description": "Data input 5, one of eight data inputs selected by the A, B, C select lines."
      },
      {
        "number": "15",
        "name": "D4",
        "type": "input",
        "description": "Data input 4, one of eight data inputs selected by the A, B, C select lines."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-sonnet-5",
        "primary_mode": "vision",
        "consensus_model": "claude-opus-4-8",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 12,
        "cost_usd": 0.3062,
        "at": "2026-09-24T01:57:39"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn74ls251.pdf",
        "pages": 23,
        "sha256": "01fb4220525fae7b",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74ls251dr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74ls251dr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "daa5edd4f3f000a7e723b11c449a7a6e80e0d7a1e3c65089da1b13ad4a0228cc",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}