main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn74ls251dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn74ls251dr: viewers · Ray
package.json sn74ls251dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json sn74ls251dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/sn74ls251dr · Ray
sn74ls251dr-etched.fit.json sn74ls251dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74ls251dr-etched.glb sn74ls251dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74ls251dr-etched.step sn74ls251dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74ls251dr.glb Publish 0.1.0 · Ray
sn74ls251dr.kicad_mod Publish 0.1.0 · Ray
sn74ls251dr.kicad_sym Publish 0.1.0 · Ray
sn74ls251dr.lbr Publish 0.1.0 · Ray
sn74ls251dr.step Publish 0.1.0 · Ray

SN74LS251DR

Texas Instruments · Signal Switches, Multiplexers, Decoders · SOP-16

SN74LS251DR from Texas Instruments, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D3 input Data input 3, one of eight data inputs selected by the A, B, C select lines.
2 D2 input Data input 2, one of eight data inputs selected by the A, B, C select lines.
3 D1 input Data input 1, one of eight data inputs selected by the A, B, C select lines.
4 D0 input Data input 0, one of eight data inputs selected by the A, B, C select lines.
5 Y tri_state True (non-inverted) three-state data output; goes to high-impedance when enable G-bar is high.
6 W output Complementary (inverted) data output providing the inverse of the selected data input; standard totem-pole output (not three-state).
7 G input Active-low enable (strobe) input; must be low to enable the device, high forces both Y and W outputs (Y to high impedance).
8 GND power_in Ground reference supply pin.
9 C input Data select binary input C, most significant bit of the 3-bit select code choosing one of eight data inputs.
10 B input Data select binary input B, middle bit of the 3-bit select code choosing one of eight data inputs.
11 A input Data select binary input A, least significant bit of the 3-bit select code choosing one of eight data inputs.
12 D7 input Data input 7, one of eight data inputs selected by the A, B, C select lines.
13 D6 input Data input 6, one of eight data inputs selected by the A, B, C select lines.
14 D5 input Data input 5, one of eight data inputs selected by the A, B, C select lines.
15 D4 input Data input 4, one of eight data inputs selected by the A, B, C select lines.
16 VCC power_in Positive supply voltage pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOP-16
Category Logic
Pins 16

CAD (KiCad official)

  • Symbol: SN74LS251DR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: sn74ls251dr-etched.step / sn74ls251dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74ls251dr.step / sn74ls251dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 01fb4220525fae7b, retrieved 2026-09-24, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-5 (vision), consensus claude-opus-4-8 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF