main
Ray
Initial commit: component/sn74ls161adr
b2a0cd1
SN74LS161ADR
Texas Instruments · Counters, Dividers · SOIC-16
SN74LS161ADR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLR | input | Active-low asynchronous clear; a low level resets all four flip-flops regardless of clock, load, or enable inputs. |
| 2 | CLK | input | Clock input; all synchronous operations occur on the rising edge of CLK. |
| 3 | A | input | Parallel data input A; loaded into QA on the rising clock edge when LOAD is low. |
| 4 | B | input | Parallel data input B; loaded into QB on the rising clock edge when LOAD is low. |
| 5 | C | input | Parallel data input C; loaded into QC on the rising clock edge when LOAD is low. |
| 6 | D | input | Parallel data input D; loaded into QD on the rising clock edge when LOAD is low. |
| 7 | ENP | input | Count enable parallel input; counting is enabled only when both ENP and ENT are high. |
| 8 | GND | power_in | Ground supply reference (0 V). |
| 9 | LOAD | input | Active-low synchronous parallel load enable; a low level causes the A-D inputs to be loaded on the next rising clock edge. |
| 10 | ENT | input | Count enable trickle input; enables counting when high (along with ENP) and also enables the RCO output. |
| 11 | QD | output | Flip-flop D (MSB) counter output; represents the 2³ bit of the synchronous binary count. |
| 12 | QC | output | Flip-flop C counter output; represents the 2² bit of the synchronous binary count. |
| 13 | QB | output | Flip-flop B counter output; represents the 2¹ bit of the synchronous binary count. |
| 14 | QA | output | Flip-flop A (LSB) counter output; represents the 2⁰ bit of the synchronous binary count. |
| 15 | RCO | output | Ripple carry output; goes high when the count is at terminal count (15) and ENT is high, enabling cascaded counting. |
| 16 | VCC | power_in | Positive supply voltage; LS-family typical operating range 4.75 V to 5.25 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Logic |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN74LS161ADR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sn74ls161adr-etched.step/sn74ls161adr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ls161adr.step/sn74ls161adr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
0ea50a72dfbd95c3, retrieved 2026-09-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74LS161ADR
**Texas Instruments** · Counters, Dividers · SOIC-16
SN74LS161ADR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLR | input | Active-low asynchronous clear; a low level resets all four flip-flops regardless of clock, load, or enable inputs. |
| 2 | CLK | input | Clock input; all synchronous operations occur on the rising edge of CLK. |
| 3 | A | input | Parallel data input A; loaded into QA on the rising clock edge when LOAD is low. |
| 4 | B | input | Parallel data input B; loaded into QB on the rising clock edge when LOAD is low. |
| 5 | C | input | Parallel data input C; loaded into QC on the rising clock edge when LOAD is low. |
| 6 | D | input | Parallel data input D; loaded into QD on the rising clock edge when LOAD is low. |
| 7 | ENP | input | Count enable parallel input; counting is enabled only when both ENP and ENT are high. |
| 8 | GND | power_in | Ground supply reference (0 V). |
| 9 | LOAD | input | Active-low synchronous parallel load enable; a low level causes the A-D inputs to be loaded on the next rising clock edge. |
| 10 | ENT | input | Count enable trickle input; enables counting when high (along with ENP) and also enables the RCO output. |
| 11 | QD | output | Flip-flop D (MSB) counter output; represents the 2³ bit of the synchronous binary count. |
| 12 | QC | output | Flip-flop C counter output; represents the 2² bit of the synchronous binary count. |
| 13 | QB | output | Flip-flop B counter output; represents the 2¹ bit of the synchronous binary count. |
| 14 | QA | output | Flip-flop A (LSB) counter output; represents the 2⁰ bit of the synchronous binary count. |
| 15 | RCO | output | Ripple carry output; goes high when the count is at terminal count (15) and ENT is high, enabling cascaded counting. |
| 16 | VCC | power_in | Positive supply voltage; LS-family typical operating range 4.75 V to 5.25 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Logic |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `SN74LS161ADR`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `sn74ls161adr-etched.step` / `sn74ls161adr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ls161adr.step` / `sn74ls161adr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74ls161a.pdf) (40 pp, sha256 `0ea50a72dfbd95c3`, retrieved 2026-09-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-4-6` (text+vision), consensus `claude-opus-4-7` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74ls161adr-datasheet.pdf)