← Commit history

Initial commit: component/sn74ls161adr

Ray ·b2a0cd1c79 ·
2 files changed +258
README.mdadded+52
@@ -0,0 +1,52 @@+# SN74LS161ADR++**Texas Instruments** · Counters, Dividers · SOIC-16++SN74LS161ADR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CLR | input | Active-low asynchronous clear; a low level resets all four flip-flops regardless of clock, load, or enable inputs. |+| 2 | CLK | input | Clock input; all synchronous operations occur on the rising edge of CLK. |+| 3 | A | input | Parallel data input A; loaded into QA on the rising clock edge when LOAD is low. |+| 4 | B | input | Parallel data input B; loaded into QB on the rising clock edge when LOAD is low. |+| 5 | C | input | Parallel data input C; loaded into QC on the rising clock edge when LOAD is low. |+| 6 | D | input | Parallel data input D; loaded into QD on the rising clock edge when LOAD is low. |+| 7 | ENP | input | Count enable parallel input; counting is enabled only when both ENP and ENT are high. |+| 8 | GND | power_in | Ground supply reference (0 V). |+| 9 | LOAD | input | Active-low synchronous parallel load enable; a low level causes the A-D inputs to be loaded on the next rising clock edge. |+| 10 | ENT | input | Count enable trickle input; enables counting when high (along with ENP) and also enables the RCO output. |+| 11 | QD | output | Flip-flop D (MSB) counter output; represents the 2³ bit of the synchronous binary count. |+| 12 | QC | output | Flip-flop C counter output; represents the 2² bit of the synchronous binary count. |+| 13 | QB | output | Flip-flop B counter output; represents the 2¹ bit of the synchronous binary count. |+| 14 | QA | output | Flip-flop A (LSB) counter output; represents the 2⁰ bit of the synchronous binary count. |+| 15 | RCO | output | Ripple carry output; goes high when the count is at terminal count (15) and ENT is high, enabling cascaded counting. |+| 16 | VCC | power_in | Positive supply voltage; LS-family typical operating range 4.75 V to 5.25 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74LS161ADR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `sn74ls161adr-etched.step` / `sn74ls161adr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ls161adr.step` / `sn74ls161adr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74ls161a.pdf) (40 pp, sha256 `0ea50a72dfbd95c3`, retrieved 2026-09-27, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-4-6` (text+vision), consensus `claude-opus-4-7` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74ls161adr-datasheet.pdf)
page.jsonadded+206
@@ -0,0 +1,206 @@+{+  "slug": "sn74ls161adr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Counters, Dividers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74ls161adr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74ls161adr.kicad_sym",+    "sn74ls161adr.kicad_mod",+    "sn74ls161adr.glb",+    "sn74ls161adr.step",+    "sn74ls161adr.lbr",+    "docs/hero.png",+    "docs/sn74ls161adr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74LS161ADR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16",+    "pin_count": 16,+    "category": "Logic",+    "subcategory": "Counters, Dividers",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74ls161a.pdf",+    "parts": {+      "symbol": "sn74ls161adr.kicad_sym",+      "footprint": "sn74ls161adr.kicad_mod",+      "model_3d": "sn74ls161adr-etched.glb",+      "model_3d_plain": "sn74ls161adr.glb",+      "model_3d_step": "sn74ls161adr-etched.step",+      "model_3d_step_plain": "sn74ls161adr.step",+      "lbr": "sn74ls161adr.lbr"+    },+    "distributor_links": {+      "lcsc": "C1848238",+      "digikey": "296-SN74LS161ADRTR-ND",+      "mouser": "595-SN74LS161ADR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T05:51:06Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-SN74LS161ADRTR-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-SN74LS161ADR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "CLR",+        "type": "input",+        "description": "Active-low asynchronous clear; a low level resets all four flip-flops regardless of clock, load, or enable inputs."+      },+      {+        "number": "2",+        "name": "CLK",+        "type": "input",+        "description": "Clock input; all synchronous operations occur on the rising edge of CLK."+      },+      {+        "number": "3",+        "name": "A",+        "type": "input",+        "description": "Parallel data input A; loaded into QA on the rising clock edge when LOAD is low."+      },+      {+        "number": "4",+        "name": "B",+        "type": "input",+        "description": "Parallel data input B; loaded into QB on the rising clock edge when LOAD is low."+      },+      {+        "number": "5",+        "name": "C",+        "type": "input",+        "description": "Parallel data input C; loaded into QC on the rising clock edge when LOAD is low."+      },+      {+        "number": "6",+        "name": "D",+        "type": "input",+        "description": "Parallel data input D; loaded into QD on the rising clock edge when LOAD is low."+      },+      {+        "number": "7",+        "name": "ENP",+        "type": "input",+        "description": "Count enable parallel input; counting is enabled only when both ENP and ENT are high."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground supply reference (0 V)."+      },+      {+        "number": "9",+        "name": "LOAD",+        "type": "input",+        "description": "Active-low synchronous parallel load enable; a low level causes the A-D inputs to be loaded on the next rising clock edge."+      },+      {+        "number": "10",+        "name": "ENT",+        "type": "input",+        "description": "Count enable trickle input; enables counting when high (along with ENP) and also enables the RCO output."+      },+      {+        "number": "11",+        "name": "QD",+        "type": "output",+        "description": "Flip-flop D (MSB) counter output; represents the 2³ bit of the synchronous binary count."+      },+      {+        "number": "12",+        "name": "QC",+        "type": "output",+        "description": "Flip-flop C counter output; represents the 2² bit of the synchronous binary count."+      },+      {+        "number": "13",+        "name": "QB",+        "type": "output",+        "description": "Flip-flop B counter output; represents the 2¹ bit of the synchronous binary count."+      },+      {+        "number": "14",+        "name": "QA",+        "type": "output",+        "description": "Flip-flop A (LSB) counter output; represents the 2⁰ bit of the synchronous binary count."+      },+      {+        "number": "15",+        "name": "RCO",+        "type": "output",+        "description": "Ripple carry output; goes high when the count is at terminal count (15) and ENT is high, enabling cascaded counting."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage; LS-family typical operating range 4.75 V to 5.25 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-sonnet-4-6",+        "primary_mode": "text+vision",+        "consensus_model": "claude-opus-4-7",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 40,+        "cost_usd": 0.5642,+        "at": "2026-09-27T05:50:48"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/sn74ls161a.pdf",+        "pages": 40,+        "sha256": "0ea50a72dfbd95c3",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file