main
Ray
Initial commit: component/sn74hct125n
7eba192
SN74HCT125N
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · DIP-14
SN74HCT125N from Texas Instruments, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Active-low output-enable input for buffer 1; when high the 1Y output is forced to the high-impedance state. |
| 2 | 1A | input | TTL-compatible data input to buffer 1 (non-inverting, Y = A when enabled). |
| 3 | 1Y | tri_state | Three-state buffer output 1, capable of ±6 mA drive at 5 V; goes high-impedance when 1OE is high. |
| 4 | 2OE | input | Active-low output-enable input for buffer 2; when high the 2Y output is forced to the high-impedance state. |
| 5 | 2A | input | TTL-compatible data input to buffer 2 (non-inverting, Y = A when enabled). |
| 6 | 2Y | tri_state | Three-state buffer output 2, capable of ±6 mA drive at 5 V; goes high-impedance when 2OE is high. |
| 7 | GND | power_in | Ground supply reference pin. |
| 8 | 3Y | tri_state | Three-state buffer output 3, capable of ±6 mA drive at 5 V; goes high-impedance when 3OE is high. |
| 9 | 3A | input | TTL-compatible data input to buffer 3 (non-inverting, Y = A when enabled). |
| 10 | 3OE | input | Active-low output-enable input for buffer 3; when high the 3Y output is forced to the high-impedance state. |
| 11 | 4Y | tri_state | Three-state buffer output 4, capable of ±6 mA drive at 5 V; goes high-impedance when 4OE is high. |
| 12 | 4A | input | TTL-compatible data input to buffer 4 (non-inverting, Y = A when enabled). |
| 13 | 4OE | input | Active-low output-enable input for buffer 4; when high the 4Y output is forced to the high-impedance state. |
| 14 | VCC | power_in | Positive supply voltage, recommended operating range 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DIP-14 |
| Category | Logic |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
SN74HCT125N - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: DIP-14 (KiCad packages3D, STEP)
- 3D model files:
sn74hct125n-etched.step/sn74hct125n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hct125n.step/sn74hct125n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
796b1a9f75671f46, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74HCT125N
**Texas Instruments** · Buffers, Drivers, Receivers, Transceivers · DIP-14
SN74HCT125N from Texas Instruments, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Active-low output-enable input for buffer 1; when high the 1Y output is forced to the high-impedance state. |
| 2 | 1A | input | TTL-compatible data input to buffer 1 (non-inverting, Y = A when enabled). |
| 3 | 1Y | tri_state | Three-state buffer output 1, capable of ±6 mA drive at 5 V; goes high-impedance when 1OE is high. |
| 4 | 2OE | input | Active-low output-enable input for buffer 2; when high the 2Y output is forced to the high-impedance state. |
| 5 | 2A | input | TTL-compatible data input to buffer 2 (non-inverting, Y = A when enabled). |
| 6 | 2Y | tri_state | Three-state buffer output 2, capable of ±6 mA drive at 5 V; goes high-impedance when 2OE is high. |
| 7 | GND | power_in | Ground supply reference pin. |
| 8 | 3Y | tri_state | Three-state buffer output 3, capable of ±6 mA drive at 5 V; goes high-impedance when 3OE is high. |
| 9 | 3A | input | TTL-compatible data input to buffer 3 (non-inverting, Y = A when enabled). |
| 10 | 3OE | input | Active-low output-enable input for buffer 3; when high the 3Y output is forced to the high-impedance state. |
| 11 | 4Y | tri_state | Three-state buffer output 4, capable of ±6 mA drive at 5 V; goes high-impedance when 4OE is high. |
| 12 | 4A | input | TTL-compatible data input to buffer 4 (non-inverting, Y = A when enabled). |
| 13 | 4OE | input | Active-low output-enable input for buffer 4; when high the 4Y output is forced to the high-impedance state. |
| 14 | VCC | power_in | Positive supply voltage, recommended operating range 4.5 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DIP-14 |
| Category | Logic |
| Pins | 14 |
## CAD (KiCad official)
- Symbol: `SN74HCT125N`
- Footprint: `Package_DIP:DIP-14_W7.62mm`
- 3D model: DIP-14 (KiCad packages3D, STEP)
- 3D model files: `sn74hct125n-etched.step` / `sn74hct125n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hct125n.step` / `sn74hct125n.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74hct125) (20 pp, sha256 `796b1a9f75671f46`, retrieved 2026-09-24, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74hct125n-datasheet.pdf)