Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74HCT125N

Texas Instruments · Buffers, Drivers, Receivers, Transceivers · DIP-14

SN74HCT125N from Texas Instruments, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OE input Active-low output-enable input for buffer 1; when high the 1Y output is forced to the high-impedance state.
2 1A input TTL-compatible data input to buffer 1 (non-inverting, Y = A when enabled).
3 1Y tri_state Three-state buffer output 1, capable of ±6 mA drive at 5 V; goes high-impedance when 1OE is high.
4 2OE input Active-low output-enable input for buffer 2; when high the 2Y output is forced to the high-impedance state.
5 2A input TTL-compatible data input to buffer 2 (non-inverting, Y = A when enabled).
6 2Y tri_state Three-state buffer output 2, capable of ±6 mA drive at 5 V; goes high-impedance when 2OE is high.
7 GND power_in Ground supply reference pin.
8 3Y tri_state Three-state buffer output 3, capable of ±6 mA drive at 5 V; goes high-impedance when 3OE is high.
9 3A input TTL-compatible data input to buffer 3 (non-inverting, Y = A when enabled).
10 3OE input Active-low output-enable input for buffer 3; when high the 3Y output is forced to the high-impedance state.
11 4Y tri_state Three-state buffer output 4, capable of ±6 mA drive at 5 V; goes high-impedance when 4OE is high.
12 4A input TTL-compatible data input to buffer 4 (non-inverting, Y = A when enabled).
13 4OE input Active-low output-enable input for buffer 4; when high the 4Y output is forced to the high-impedance state.
14 VCC power_in Positive supply voltage, recommended operating range 4.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package DIP-14
Category Logic
Pins 14

CAD (KiCad official)

  • Symbol: SN74HCT125N
  • Footprint: Package_DIP:DIP-14_W7.62mm
  • 3D model: DIP-14 (KiCad packages3D, STEP)
  • 3D model files: sn74hct125n-etched.step / sn74hct125n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hct125n.step / sn74hct125n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (20 pp, sha256 796b1a9f75671f46, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF