main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn74hc574pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn74hc574pwr: viewers · Ray
package.json sn74hc574pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
page.json sn74hc574pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
README.md Initial commit: component/sn74hc574pwr · Ray
sn74hc574pwr-etched.fit.json sn74hc574pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74hc574pwr-etched.glb sn74hc574pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
sn74hc574pwr-etched.step sn74hc574pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
sn74hc574pwr.glb Publish 0.1.0 · Ray
sn74hc574pwr.kicad_mod Publish 0.1.0 · Ray
sn74hc574pwr.kicad_sym Publish 0.1.0 · Ray
sn74hc574pwr.lbr Publish 0.1.0 · Ray
sn74hc574pwr.step Publish 0.1.0 · Ray

SN74HC574PWR

Texas Instruments · Flip Flops · TSSOP-20

SN74HC574PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Active-low output-enable input; when high, forces all eight Q outputs to the high-impedance state without affecting internal flip-flop data.
2 1D input Data input for flip-flop 1, latched into Q1 on the low-to-high transition of CLK.
3 2D input Data input for flip-flop 2, latched into Q2 on the low-to-high transition of CLK.
4 3D input Data input for flip-flop 3, latched into Q3 on the low-to-high transition of CLK.
5 4D input Data input for flip-flop 4, latched into Q4 on the low-to-high transition of CLK.
6 5D input Data input for flip-flop 5, latched into Q5 on the low-to-high transition of CLK.
7 6D input Data input for flip-flop 6, latched into Q6 on the low-to-high transition of CLK.
8 7D input Data input for flip-flop 7, latched into Q7 on the low-to-high transition of CLK.
9 8D input Data input for flip-flop 8, latched into Q8 on the low-to-high transition of CLK.
10 GND power_in Ground reference (0 V) supply pin.
11 CLK input Clock input; data on Dn inputs is entered into the corresponding flip-flop on the low-to-high (rising) transition of this input.
12 8Q tri_state 3-state noninverting output of flip-flop 8, capable of ±6-mA drive at 5 V and driven to high impedance when OE is high.
13 7Q tri_state 3-state noninverting output of flip-flop 7, capable of ±6-mA drive at 5 V and driven to high impedance when OE is high.
14 6Q tri_state 3-state noninverting output of flip-flop 6, capable of ±6-mA drive at 5 V and driven to high impedance when OE is high.
15 5Q tri_state 3-state noninverting output of flip-flop 5, capable of ±6-mA drive at 5 V and driven to high impedance when OE is high.
16 4Q tri_state 3-state noninverting output of flip-flop 4, capable of ±6-mA drive at 5 V and driven to high impedance when OE is high.
17 3Q tri_state 3-state noninverting output of flip-flop 3, capable of ±6-mA drive at 5 V and driven to high impedance when OE is high.
18 2Q tri_state 3-state noninverting output of flip-flop 2, capable of ±6-mA drive at 5 V and driven to high impedance when OE is high.
19 1Q tri_state 3-state noninverting output of flip-flop 1, capable of ±6-mA drive at 5 V and driven to high impedance when OE is high.
20 VCC power_in Positive supply voltage pin, specified over a wide operating range of 2 V to 6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Logic
Pins 20

CAD (KiCad official)

  • Symbol: SN74HC574PWR
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: sn74hc574pwr-etched.step / sn74hc574pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hc574pwr.step / sn74hc574pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 41dc3007ca8c8f8e, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-5 (text+vision), consensus claude-opus-4-8 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF