main
Ray Publish 0.1.0 d3b418c

SN74HC573AQPWRG4Q1

Texas Instruments · Latches · TSSOP-20

SN74HC573AQPWRG4Q1 from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Output enable input; low gives normal logic levels on the Q outputs and high places all eight outputs in the high-impedance state, and it should be tied to VCC through a pullup resistor to ensure high-impedance during power up or power down.
2 1D input Data input 1 of the octal transparent D-type latch, which must be held at VCC or GND when unused.
3 2D input Data input 2 of the octal transparent D-type latch, which must be held at VCC or GND when unused.
4 3D input Data input 3 of the octal transparent D-type latch, which must be held at VCC or GND when unused.
5 4D input Data input 4 of the octal transparent D-type latch, which must be held at VCC or GND when unused.
6 5D input Data input 5 of the octal transparent D-type latch, which must be held at VCC or GND when unused.
7 6D input Data input 6 of the octal transparent D-type latch, which must be held at VCC or GND when unused.
8 7D input Data input 7 of the octal transparent D-type latch, which must be held at VCC or GND when unused.
9 8D input Data input 8 of the octal transparent D-type latch, which must be held at VCC or GND when unused.
10 GND power_in Ground pin; continuous current through VCC or GND is limited to ±70 mA.
11 LE input Latch enable input; the Q outputs follow the D inputs while LE is high and retain the set-up data when LE is low.
12 8Q tri_state Latch 8 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high.
13 7Q tri_state Latch 7 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high.
14 6Q tri_state Latch 6 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high.
15 5Q tri_state Latch 5 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high.
16 4Q tri_state Latch 4 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high.
17 3Q tri_state Latch 3 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high.
18 2Q tri_state Latch 2 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high.
19 1Q tri_state Latch 1 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high.
20 VCC power_in Supply voltage pin with a recommended operating range of 2 V to 6 V and a 0.1-μF bypass capacitor recommended close to the pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Logic ICs
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.5 7 V 4
Input clamp current IIK -20 20 mA VI < 0 or VI > VCC 4
Output clamp current IOK -20 20 mA VO < 0 or VO > VCC 4
Continuous output current IO -35 35 mA VO = 0 to VCC 4
Continuous current through VCC or GND -70 70 mA 4
Junction temperature TJ 150 °C 4
Storage temperature range Tstg -65 150 °C 4
Supply voltage VCC 2 5 6 V 4
High-level input voltage VIH 1.5 V VCC = 2 V 4
High-level input voltage VIH 3.15 V VCC = 4.5 V 4
High-level input voltage VIH 4.2 V VCC = 6 V 4
Low-level input voltage VIL 0.5 V VCC = 2 V 4
Low-level input voltage VIL 1.35 V VCC = 4.5 V 4
Low-level input voltage VIL 1.8 V VCC = 6 V 4
Input voltage VI 0 V maximum is VCC 4
Output voltage VO 0 V maximum is VCC 4
Input transition (rise and fall) time tt 1000 ns VCC = 2 V 4
Input transition (rise and fall) time tt 500 ns VCC = 4.5 V 4
Input transition (rise and fall) time tt 400 ns VCC = 6 V 4
Operating free-air temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 131.8 °C/W PW (TSSOP) 20 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 72.2 °C/W PW (TSSOP) 20 pins 4
Junction-to-board thermal resistance RθJB 82.8 °C/W PW (TSSOP) 20 pins 4
Junction-to-top characterization parameter ψJT 21.5 °C/W PW (TSSOP) 20 pins 4
Junction-to-board characterization parameter ψJB 82.4 °C/W PW (TSSOP) 20 pins 4
High-level output voltage VOH 1.9 1.998 V VI = VIH or VIL, IOH = -20 μA, VCC = 2 V 5
High-level output voltage VOH 4.4 4.499 V VI = VIH or VIL, IOH = -20 μA, VCC = 4.5 V 5
High-level output voltage VOH 5.9 5.999 V VI = VIH or VIL, IOH = -20 μA, VCC = 6 V 5
High-level output voltage VOH 3.7 4.3 V VI = VIH or VIL, IOH = -6 mA, VCC = 4.5 V 5
High-level output voltage VOH 5.2 5.8 V VI = VIH or VIL, IOH = -7.8 mA, VCC = 6 V 5
Low-level output voltage VOL 0.002 0.1 V VI = VIH or VIL, IOL = 20 μA, VCC = 2 V 5
Low-level output voltage VOL 0.001 0.1 V VI = VIH or VIL, IOL = 20 μA, VCC = 4.5 V 5
Low-level output voltage VOL 0.17 0.4 V VI = VIH or VIL, IOL = 6 mA, VCC = 4.5 V 5
Low-level output voltage VOL 0.15 0.4 V VI = VIH or VIL, IOL = 7.8 mA, VCC = 6 V 5
Input leakage current II -1000 0.1 1000 nA VI = VCC or 0, VCC = 6 V 5
Off-state (high-impedance) output current IOZ -10 0.01 10 μA VO = VCC or 0, VCC = 6 V 5
Supply current ICC 8 160 μA VI = VCC or 0, IO = 0, VCC = 6 V 5
Input capacitance Ci 3 10 pF VCC = 2 V to 6 V 5

CAD (KiCad official)

  • Symbol: SN74HC573AQPWRG4Q1
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: sn74hc573aqpwrg4q1-etched.step / sn74hc573aqpwrg4q1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hc573aqpwrg4q1.step / sn74hc573aqpwrg4q1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (21 pp, sha256 c41975c31fa2cc1c, retrieved 2026-11-02, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF