Generated by kicad-footprint-generator · KiCad file format 20260206
SN74HC573AQPWRG4Q1
Texas Instruments · Latches · TSSOP-20
SN74HC573AQPWRG4Q1 from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input; low gives normal logic levels on the Q outputs and high places all eight outputs in the high-impedance state, and it should be tied to VCC through a pullup resistor to ensure high-impedance during power up or power down. |
| 2 | 1D | input | Data input 1 of the octal transparent D-type latch, which must be held at VCC or GND when unused. |
| 3 | 2D | input | Data input 2 of the octal transparent D-type latch, which must be held at VCC or GND when unused. |
| 4 | 3D | input | Data input 3 of the octal transparent D-type latch, which must be held at VCC or GND when unused. |
| 5 | 4D | input | Data input 4 of the octal transparent D-type latch, which must be held at VCC or GND when unused. |
| 6 | 5D | input | Data input 5 of the octal transparent D-type latch, which must be held at VCC or GND when unused. |
| 7 | 6D | input | Data input 6 of the octal transparent D-type latch, which must be held at VCC or GND when unused. |
| 8 | 7D | input | Data input 7 of the octal transparent D-type latch, which must be held at VCC or GND when unused. |
| 9 | 8D | input | Data input 8 of the octal transparent D-type latch, which must be held at VCC or GND when unused. |
| 10 | GND | power_in | Ground pin; continuous current through VCC or GND is limited to ±70 mA. |
| 11 | LE | input | Latch enable input; the Q outputs follow the D inputs while LE is high and retain the set-up data when LE is low. |
| 12 | 8Q | tri_state | Latch 8 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high. |
| 13 | 7Q | tri_state | Latch 7 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high. |
| 14 | 6Q | tri_state | Latch 6 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high. |
| 15 | 5Q | tri_state | Latch 5 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high. |
| 16 | 4Q | tri_state | Latch 4 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high. |
| 17 | 3Q | tri_state | Latch 3 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high. |
| 18 | 2Q | tri_state | Latch 2 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high. |
| 19 | 1Q | tri_state | Latch 1 3-state output, with ±6 mA output drive at 5 V and high-impedance when OE is high. |
| 20 | VCC | power_in | Supply voltage pin with a recommended operating range of 2 V to 6 V and a 0.1-μF bypass capacitor recommended close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic ICs |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 7 | V | 4 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VCC | 4 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 4 | |
| Continuous output current | IO | -35 | 35 | mA | VO = 0 to VCC | 4 | |
| Continuous current through VCC or GND | -70 | 70 | mA | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 2 | 5 | 6 | V | 4 | |
| High-level input voltage | VIH | 1.5 | V | VCC = 2 V | 4 | ||
| High-level input voltage | VIH | 3.15 | V | VCC = 4.5 V | 4 | ||
| High-level input voltage | VIH | 4.2 | V | VCC = 6 V | 4 | ||
| Low-level input voltage | VIL | 0.5 | V | VCC = 2 V | 4 | ||
| Low-level input voltage | VIL | 1.35 | V | VCC = 4.5 V | 4 | ||
| Low-level input voltage | VIL | 1.8 | V | VCC = 6 V | 4 | ||
| Input voltage | VI | 0 | V | maximum is VCC | 4 | ||
| Output voltage | VO | 0 | V | maximum is VCC | 4 | ||
| Input transition (rise and fall) time | tt | 1000 | ns | VCC = 2 V | 4 | ||
| Input transition (rise and fall) time | tt | 500 | ns | VCC = 4.5 V | 4 | ||
| Input transition (rise and fall) time | tt | 400 | ns | VCC = 6 V | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 131.8 | °C/W | PW (TSSOP) 20 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 72.2 | °C/W | PW (TSSOP) 20 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 82.8 | °C/W | PW (TSSOP) 20 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 21.5 | °C/W | PW (TSSOP) 20 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 82.4 | °C/W | PW (TSSOP) 20 pins | 4 | ||
| High-level output voltage | VOH | 1.9 | 1.998 | V | VI = VIH or VIL, IOH = -20 μA, VCC = 2 V | 5 | |
| High-level output voltage | VOH | 4.4 | 4.499 | V | VI = VIH or VIL, IOH = -20 μA, VCC = 4.5 V | 5 | |
| High-level output voltage | VOH | 5.9 | 5.999 | V | VI = VIH or VIL, IOH = -20 μA, VCC = 6 V | 5 | |
| High-level output voltage | VOH | 3.7 | 4.3 | V | VI = VIH or VIL, IOH = -6 mA, VCC = 4.5 V | 5 | |
| High-level output voltage | VOH | 5.2 | 5.8 | V | VI = VIH or VIL, IOH = -7.8 mA, VCC = 6 V | 5 | |
| Low-level output voltage | VOL | 0.002 | 0.1 | V | VI = VIH or VIL, IOL = 20 μA, VCC = 2 V | 5 | |
| Low-level output voltage | VOL | 0.001 | 0.1 | V | VI = VIH or VIL, IOL = 20 μA, VCC = 4.5 V | 5 | |
| Low-level output voltage | VOL | 0.17 | 0.4 | V | VI = VIH or VIL, IOL = 6 mA, VCC = 4.5 V | 5 | |
| Low-level output voltage | VOL | 0.15 | 0.4 | V | VI = VIH or VIL, IOL = 7.8 mA, VCC = 6 V | 5 | |
| Input leakage current | II | -1000 | 0.1 | 1000 | nA | VI = VCC or 0, VCC = 6 V | 5 |
| Off-state (high-impedance) output current | IOZ | -10 | 0.01 | 10 | μA | VO = VCC or 0, VCC = 6 V | 5 |
| Supply current | ICC | 8 | 160 | μA | VI = VCC or 0, IO = 0, VCC = 6 V | 5 | |
| Input capacitance | Ci | 3 | 10 | pF | VCC = 2 V to 6 V | 5 |
CAD (KiCad official)
- Symbol:
SN74HC573AQPWRG4Q1 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
sn74hc573aqpwrg4q1-etched.step/sn74hc573aqpwrg4q1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hc573aqpwrg4q1.step/sn74hc573aqpwrg4q1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
c41975c31fa2cc1c, retrieved 2026-11-02, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).