← Commit history
README.mdadded+57@@ -0,0 +1,57 @@+# SN74HC573AQDWRQ1++**Texas Instruments** · Latches · SOIC-20-300mil++SN74HC573AQDWRQ1 from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OE | input | Active-low, buffered output-enable input; when low the Q outputs reflect the latch contents, when high all eight Q outputs are forced to the high-impedance state; OE does not affect internal latch operation and should be tied to VCC through a pull-up resistor to ensure high-impedance state during power up/down. |+| 2 | 1Q | tri_state | Three-state output of latch 1; reflects the latched or transparent 1D data and goes to high-impedance when OE is high, capable of ±6mA drive at VCC=5V. |+| 3 | 2Q | tri_state | Three-state output of latch 2; reflects the latched or transparent 2D data and goes to high-impedance when OE is high. |+| 4 | 3Q | tri_state | Three-state output of latch 3; reflects the latched or transparent 3D data and goes to high-impedance when OE is high. |+| 5 | 4Q | tri_state | Three-state output of latch 4; reflects the latched or transparent 4D data and goes to high-impedance when OE is high. |+| 6 | 5Q | tri_state | Three-state output of latch 5; reflects the latched or transparent 5D data and goes to high-impedance when OE is high. |+| 7 | 6Q | tri_state | Three-state output of latch 6; reflects the latched or transparent 6D data and goes to high-impedance when OE is high. |+| 8 | 7Q | tri_state | Three-state output of latch 7; reflects the latched or transparent 7D data and goes to high-impedance when OE is high. |+| 9 | 8Q | tri_state | Three-state output of latch 8; reflects the latched or transparent 8D data and goes to high-impedance when OE is high. |+| 10 | GND | power_in | Ground reference pin for the device. |+| 11 | LE | input | Latch-enable input; while LE is high the Q outputs are transparent and follow the D inputs, when LE goes low the data present at setup time is latched and held at the outputs. |+| 12 | 8D | input | Data input to latch 8; while LE is high this value is passed to 8Q, and is captured on the high-to-low transition of LE. |+| 13 | 7D | input | Data input to latch 7; while LE is high this value is passed to 7Q, and is captured on the high-to-low transition of LE. |+| 14 | 6D | input | Data input to latch 6; while LE is high this value is passed to 6Q, and is captured on the high-to-low transition of LE. |+| 15 | 5D | input | Data input to latch 5; while LE is high this value is passed to 5Q, and is captured on the high-to-low transition of LE. |+| 16 | 4D | input | Data input to latch 4; while LE is high this value is passed to 4Q, and is captured on the high-to-low transition of LE. |+| 17 | 3D | input | Data input to latch 3; while LE is high this value is passed to 3Q, and is captured on the high-to-low transition of LE. |+| 18 | 2D | input | Data input to latch 2; while LE is high this value is passed to 2Q, and is captured on the high-to-low transition of LE. |+| 19 | 1D | input | Data input to latch 1; while LE is high this value is passed to 1Q, and is captured on the high-to-low transition of LE. |+| 20 | VCC | power_in | Positive supply voltage; recommended operating range is 2V to 6V (absolute maximum 7V); a 0.1µF bypass capacitor close to this pin is recommended. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-20-300mil |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `SN74HC573AQDWRQ1`+- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`+- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)+- 3D model files: `sn74hc573aqdwrq1-etched.step` / `sn74hc573aqdwrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc573aqdwrq1.step` / `sn74hc573aqdwrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74hc573a-q1) (21 pp, sha256 `c41975c31fa2cc1c`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74hc573aqdwrq1-datasheet.pdf)
page.jsonadded+215@@ -0,0 +1,215 @@+{+ "slug": "sn74hc573aqdwrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Latches, SOIC-20-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "sn74hc573aqdwrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn74hc573aqdwrq1.kicad_sym",+ "sn74hc573aqdwrq1.kicad_mod",+ "sn74hc573aqdwrq1.glb",+ "sn74hc573aqdwrq1.step",+ "sn74hc573aqdwrq1.lbr",+ "docs/hero.png",+ "docs/sn74hc573aqdwrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "SN74HC573AQDWRQ1",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-20-300mil",+ "pin_count": 20,+ "category": "Logic",+ "subcategory": "Latches",+ "datasheet": "https://www.ti.com/cn/lit/gpn/sn74hc573a-q1",+ "parts": {+ "symbol": "sn74hc573aqdwrq1.kicad_sym",+ "footprint": "sn74hc573aqdwrq1.kicad_mod",+ "model_3d": "sn74hc573aqdwrq1-etched.glb",+ "model_3d_plain": "sn74hc573aqdwrq1.glb",+ "model_3d_step": "sn74hc573aqdwrq1-etched.step",+ "model_3d_step_plain": "sn74hc573aqdwrq1.step",+ "lbr": "sn74hc573aqdwrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2675252"+ },+ "pins": [+ {+ "number": "1",+ "name": "OE",+ "type": "input",+ "description": "Active-low, buffered output-enable input; when low the Q outputs reflect the latch contents, when high all eight Q outputs are forced to the high-impedance state; OE does not affect internal latch operation and should be tied to VCC through a pull-up resistor to ensure high-impedance state during power up/down."+ },+ {+ "number": "2",+ "name": "1Q",+ "type": "tri_state",+ "description": "Three-state output of latch 1; reflects the latched or transparent 1D data and goes to high-impedance when OE is high, capable of ±6mA drive at VCC=5V."+ },+ {+ "number": "3",+ "name": "2Q",+ "type": "tri_state",+ "description": "Three-state output of latch 2; reflects the latched or transparent 2D data and goes to high-impedance when OE is high."+ },+ {+ "number": "4",+ "name": "3Q",+ "type": "tri_state",+ "description": "Three-state output of latch 3; reflects the latched or transparent 3D data and goes to high-impedance when OE is high."+ },+ {+ "number": "5",+ "name": "4Q",+ "type": "tri_state",+ "description": "Three-state output of latch 4; reflects the latched or transparent 4D data and goes to high-impedance when OE is high."+ },+ {+ "number": "6",+ "name": "5Q",+ "type": "tri_state",+ "description": "Three-state output of latch 5; reflects the latched or transparent 5D data and goes to high-impedance when OE is high."+ },+ {+ "number": "7",+ "name": "6Q",+ "type": "tri_state",+ "description": "Three-state output of latch 6; reflects the latched or transparent 6D data and goes to high-impedance when OE is high."+ },+ {+ "number": "8",+ "name": "7Q",+ "type": "tri_state",+ "description": "Three-state output of latch 7; reflects the latched or transparent 7D data and goes to high-impedance when OE is high."+ },+ {+ "number": "9",+ "name": "8Q",+ "type": "tri_state",+ "description": "Three-state output of latch 8; reflects the latched or transparent 8D data and goes to high-impedance when OE is high."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference pin for the device."+ },+ {+ "number": "11",+ "name": "LE",+ "type": "input",+ "description": "Latch-enable input; while LE is high the Q outputs are transparent and follow the D inputs, when LE goes low the data present at setup time is latched and held at the outputs."+ },+ {+ "number": "12",+ "name": "8D",+ "type": "input",+ "description": "Data input to latch 8; while LE is high this value is passed to 8Q, and is captured on the high-to-low transition of LE."+ },+ {+ "number": "13",+ "name": "7D",+ "type": "input",+ "description": "Data input to latch 7; while LE is high this value is passed to 7Q, and is captured on the high-to-low transition of LE."+ },+ {+ "number": "14",+ "name": "6D",+ "type": "input",+ "description": "Data input to latch 6; while LE is high this value is passed to 6Q, and is captured on the high-to-low transition of LE."+ },+ {+ "number": "15",+ "name": "5D",+ "type": "input",+ "description": "Data input to latch 5; while LE is high this value is passed to 5Q, and is captured on the high-to-low transition of LE."+ },+ {+ "number": "16",+ "name": "4D",+ "type": "input",+ "description": "Data input to latch 4; while LE is high this value is passed to 4Q, and is captured on the high-to-low transition of LE."+ },+ {+ "number": "17",+ "name": "3D",+ "type": "input",+ "description": "Data input to latch 3; while LE is high this value is passed to 3Q, and is captured on the high-to-low transition of LE."+ },+ {+ "number": "18",+ "name": "2D",+ "type": "input",+ "description": "Data input to latch 2; while LE is high this value is passed to 2Q, and is captured on the high-to-low transition of LE."+ },+ {+ "number": "19",+ "name": "1D",+ "type": "input",+ "description": "Data input to latch 1; while LE is high this value is passed to 1Q, and is captured on the high-to-low transition of LE."+ },+ {+ "number": "20",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage; recommended operating range is 2V to 6V (absolute maximum 7V); a 0.1µF bypass capacitor close to this pin is recommended."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin configuration extracted from PAGE 3 diagram. The diagram text format is somewhat ambiguous in th"+ ],+ "pages_sent": 21,+ "cost_usd": 0.2749,+ "at": "2026-09-23T21:55:54"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/sn74hc573a-q1",+ "pages": 21,+ "sha256": "c41975c31fa2cc1c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 20,+ "described": 20,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}