component
SN74HC366N
Public Made by Adomby adom
XBLW Buffers, Drivers, Receivers, Transceivers, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SN74HC366N
XBLW · Buffers, Drivers, Receivers, Transceivers · DIP-16
SN74HC366N from XBLW, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE1 | input | Output enable input 1, active LOW; a HIGH on this pin forces the associated outputs into the high-impedance OFF-state. |
| 2 | 1A | input | Data input 1 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 3 | 1Y | output | Data output 1, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 4 | 2A | input | Data input 2 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 5 | 2Y | output | Data output 2, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 6 | 3A | input | Data input 3 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 7 | 3Y | output | Data output 3, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 8 | GND | power_in | Ground reference (0 V); all voltages are referenced to this pin. |
| 9 | 4Y | output | Data output 4, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 10 | 4A | input | Data input 4 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 11 | 5Y | output | Data output 5, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 12 | 5A | input | Data input 5 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 13 | 6Y | output | Data output 6, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 14 | 6A | input | Data input 6 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 15 | OE2 | input | Output enable input 2, active LOW; a HIGH on this pin forces the associated outputs into the high-impedance OFF-state. |
| 16 | VCC | power_in | Supply voltage: recommended 2.0 V to 6.0 V for SN74HC366 and 4.5 V to 5.5 V for SN74HCT366, absolute maximum 7.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XBLW |
| Package | DIP-16 |
| Category | Logic |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| input clamping current | IIK | -20 | 20 | mA | VI < -0.5V or VI > VCC+0.5V | 4 | |
| output clamping current | IOK | -20 | 20 | mA | VO < -0.5V or VO > VCC+0.5V | 4 | |
| output current | IO | -35 | 35 | mA | -0.5V < VO < VCC+0.5V | 4 | |
| supply current | ICC | 70 | mA | 4 | |||
| ground current | IGND | -70 | mA | 4 | |||
| storage temperature | Tstg | -65 | 150 | ℃ | 4 | ||
| total power dissipation | Ptot | 500 | mW | 4 | |||
| soldering temperature (DIP package) | TL | 245 | ℃ | 10s, DIP | 4 | ||
| supply voltage (SN74HC366) | VCC | 2 | 5 | 6 | V | 4 | |
| input voltage | VI | 0 | V | 4 | |||
| output voltage | VO | 0 | V | 4 | |||
| input transition rise and fall rate | Δt/ΔV | 625 | ns/V | VCC=2.0V | 4 | ||
| input transition rise and fall rate | Δt/ΔV | 1.67 | 139 | ns/V | VCC=4.5V | 4 | |
| input transition rise and fall rate | Δt/ΔV | 83 | ns/V | VCC=6.0V | 4 | ||
| ambient temperature | Tamb | -40 | 125 | ℃ | 4 | ||
| HIGH-level input voltage | VIH | 1.5 | 1.2 | V | Tamb=25℃; VCC=2.0V | 5 | |
| HIGH-level input voltage | VIH | 3.15 | 2.4 | V | Tamb=25℃; VCC=4.5V | 5 | |
| HIGH-level input voltage | VIH | 4.2 | 3.2 | V | Tamb=25℃; VCC=6.0V | 5 | |
| LOW-level input voltage | VIL | 0.8 | 0.5 | V | Tamb=25℃; VCC=2.0V | 5 | |
| LOW-level input voltage | VIL | 2.1 | 1.35 | V | Tamb=25℃; VCC=4.5V | 5 | |
| LOW-level input voltage | VIL | 2.8 | 1.8 | V | Tamb=25℃; VCC=6.0V | 5 | |
| HIGH-level output voltage | VOH | 1.9 | 2 | V | Tamb=25℃; VI = VIH or VIL; IO=-20uA; VCC=2.0V | 5 | |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | V | Tamb=25℃; VI = VIH or VIL; IO=-20uA; VCC=4.5V | 5 | |
| HIGH-level output voltage | VOH | 5.9 | 6 | V | Tamb=25℃; VI = VIH or VIL; IO=-20uA; VCC=6.0V | 5 | |
| HIGH-level output voltage | VOH | 3.98 | 4.32 | V | Tamb=25℃; VI = VIH or VIL; IO=-6.0mA; VCC=4.5V | 5 | |
| HIGH-level output voltage | VOH | 5.48 | 5.81 | V | Tamb=25℃; VI = VIH or VIL; IO=-7.8mA; VCC=6.0V | 5 | |
| LOW-level output voltage | VOL | 0 | 0.1 | V | Tamb=25℃; VI = VIH or VIL; IO=20uA; VCC=2.0V | 5 | |
| LOW-level output voltage | VOL | 0.15 | 0.26 | V | Tamb=25℃; VI = VIH or VIL; IO=6.0mA; VCC=4.5V | 5 | |
| LOW-level output voltage | VOL | 0.16 | 0.26 | V | Tamb=25℃; VI = VIH or VIL; IO=7.8mA; VCC=6.0V | 5 | |
| input leakage current | II | -1 | 1 | uA | Tamb=25℃; VI=VCC or GND; VCC=6.0V | 5 | |
| OFF-state output current | IOZ | -1 | 1 | uA | Tamb=25℃; VI=VIH or VIL; VCC=6.0V; VO=VCC or GND | 5 | |
| supply current | ICC | 8 | uA | Tamb=25℃; VI=VCC or GND; IO=0A; VCC=6.0V | 5 | ||
| HIGH-level input voltage | VIH | 1.5 | V | Tamb=-40℃ to +125℃; VCC=2.0V | 7 | ||
| HIGH-level input voltage | VIH | 3.15 | V | Tamb=-40℃ to +125℃; VCC=4.5V | 7 | ||
| HIGH-level input voltage | VIH | 4.2 | V | Tamb=-40℃ to +125℃; VCC=6.0V | 7 | ||
| LOW-level input voltage | VIL | 0.5 | V | Tamb=-40℃ to +125℃; VCC=2.0V | 7 | ||
| LOW-level input voltage | VIL | 1.35 | V | Tamb=-40℃ to +125℃; VCC=4.5V | 7 | ||
| LOW-level input voltage | VIL | 1.8 | V | Tamb=-40℃ to +125℃; VCC=6.0V | 7 | ||
| HIGH-level output voltage | VOH | 1.9 | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-20uA; VCC=2.0V | 7 | ||
| HIGH-level output voltage | VOH | 4.4 | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-20uA; VCC=4.5V | 7 | ||
| HIGH-level output voltage | VOH | 5.9 | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-20uA; VCC=6.0V | 7 | ||
| HIGH-level output voltage | VOH | 3.7 | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-6.0mA; VCC=4.5V | 7 | ||
| HIGH-level output voltage | VOH | 5.2 | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-7.8mA; VCC=6.0V | 7 | ||
| LOW-level output voltage | VOL | 0.1 | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=20uA; VCC=2.0V | 7 | ||
| LOW-level output voltage | VOL | 0.4 | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=6.0mA; VCC=4.5V | 7 | ||
| input leakage current | II | -1 | 1 | uA | Tamb=-40℃ to +125℃; VI=VCC or GND; VCC=6.0V | 7 | |
| OFF-state output current | IOZ | -10 | 10 | uA | Tamb=-40℃ to +125℃; VI=VIH or VIL; VCC=6.0V; VO=VCC or GND | 7 | |
| supply current | ICC | 160 | uA | Tamb=-40℃ to +125℃; VI=VCC or GND; IO=0A; VCC=6.0V | 7 | ||
| propagation delay nA to nY | tpd | 150 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=2.0V | 10 | ||
| propagation delay nA to nY | tpd | 30 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=4.5V | 10 | ||
| propagation delay nA to nY | tpd | 26 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=6.0V | 10 | ||
| output enable time OEn to nY | ten | 225 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=2.0V | 10 | ||
| output enable time OEn to nY | ten | 45 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=4.5V | 10 | ||
| output enable time OEn to nY | ten | 38 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=6.0V | 10 |
CAD (KiCad official)
- Symbol:
SN74HC366N - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files:
sn74hc366n-etched.step/sn74hc366n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74hc366n.step/sn74hc366n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XBLW datasheet (16 pp, sha256
add03243e0522bf3, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74HC366N
**XBLW** · Buffers, Drivers, Receivers, Transceivers · DIP-16
SN74HC366N from XBLW, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE1 | input | Output enable input 1, active LOW; a HIGH on this pin forces the associated outputs into the high-impedance OFF-state. |
| 2 | 1A | input | Data input 1 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 3 | 1Y | output | Data output 1, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 4 | 2A | input | Data input 2 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 5 | 2Y | output | Data output 2, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 6 | 3A | input | Data input 3 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 7 | 3Y | output | Data output 3, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 8 | GND | power_in | Ground reference (0 V); all voltages are referenced to this pin. |
| 9 | 4Y | output | Data output 4, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 10 | 4A | input | Data input 4 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 11 | 5Y | output | Data output 5, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 12 | 5A | input | Data input 5 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 13 | 6Y | output | Data output 6, inverting 3-state output that is high impedance when its output enable is HIGH. |
| 14 | 6A | input | Data input 6 of the inverting buffer; inputs include clamp diodes so current-limiting resistors can interface voltages above VCC. |
| 15 | OE2 | input | Output enable input 2, active LOW; a HIGH on this pin forces the associated outputs into the high-impedance OFF-state. |
| 16 | VCC | power_in | Supply voltage: recommended 2.0 V to 6.0 V for SN74HC366 and 4.5 V to 5.5 V for SN74HCT366, absolute maximum 7.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XBLW |
| Package | DIP-16 |
| Category | Logic |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | | 7 | V | | 4 |
| input clamping current | IIK | -20 | | 20 | mA | VI < -0.5V or VI > VCC+0.5V | 4 |
| output clamping current | IOK | -20 | | 20 | mA | VO < -0.5V or VO > VCC+0.5V | 4 |
| output current | IO | -35 | | 35 | mA | -0.5V < VO < VCC+0.5V | 4 |
| supply current | ICC | | | 70 | mA | | 4 |
| ground current | IGND | -70 | | | mA | | 4 |
| storage temperature | Tstg | -65 | | 150 | ℃ | | 4 |
| total power dissipation | Ptot | | | 500 | mW | | 4 |
| soldering temperature (DIP package) | TL | | | 245 | ℃ | 10s, DIP | 4 |
| supply voltage (SN74HC366) | VCC | 2 | 5 | 6 | V | | 4 |
| input voltage | VI | 0 | | | V | | 4 |
| output voltage | VO | 0 | | | V | | 4 |
| input transition rise and fall rate | Δt/ΔV | | | 625 | ns/V | VCC=2.0V | 4 |
| input transition rise and fall rate | Δt/ΔV | | 1.67 | 139 | ns/V | VCC=4.5V | 4 |
| input transition rise and fall rate | Δt/ΔV | | | 83 | ns/V | VCC=6.0V | 4 |
| ambient temperature | Tamb | -40 | | 125 | ℃ | | 4 |
| HIGH-level input voltage | VIH | 1.5 | 1.2 | | V | Tamb=25℃; VCC=2.0V | 5 |
| HIGH-level input voltage | VIH | 3.15 | 2.4 | | V | Tamb=25℃; VCC=4.5V | 5 |
| HIGH-level input voltage | VIH | 4.2 | 3.2 | | V | Tamb=25℃; VCC=6.0V | 5 |
| LOW-level input voltage | VIL | | 0.8 | 0.5 | V | Tamb=25℃; VCC=2.0V | 5 |
| LOW-level input voltage | VIL | | 2.1 | 1.35 | V | Tamb=25℃; VCC=4.5V | 5 |
| LOW-level input voltage | VIL | | 2.8 | 1.8 | V | Tamb=25℃; VCC=6.0V | 5 |
| HIGH-level output voltage | VOH | 1.9 | 2 | | V | Tamb=25℃; VI = VIH or VIL; IO=-20uA; VCC=2.0V | 5 |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | | V | Tamb=25℃; VI = VIH or VIL; IO=-20uA; VCC=4.5V | 5 |
| HIGH-level output voltage | VOH | 5.9 | 6 | | V | Tamb=25℃; VI = VIH or VIL; IO=-20uA; VCC=6.0V | 5 |
| HIGH-level output voltage | VOH | 3.98 | 4.32 | | V | Tamb=25℃; VI = VIH or VIL; IO=-6.0mA; VCC=4.5V | 5 |
| HIGH-level output voltage | VOH | 5.48 | 5.81 | | V | Tamb=25℃; VI = VIH or VIL; IO=-7.8mA; VCC=6.0V | 5 |
| LOW-level output voltage | VOL | | 0 | 0.1 | V | Tamb=25℃; VI = VIH or VIL; IO=20uA; VCC=2.0V | 5 |
| LOW-level output voltage | VOL | | 0.15 | 0.26 | V | Tamb=25℃; VI = VIH or VIL; IO=6.0mA; VCC=4.5V | 5 |
| LOW-level output voltage | VOL | | 0.16 | 0.26 | V | Tamb=25℃; VI = VIH or VIL; IO=7.8mA; VCC=6.0V | 5 |
| input leakage current | II | -1 | | 1 | uA | Tamb=25℃; VI=VCC or GND; VCC=6.0V | 5 |
| OFF-state output current | IOZ | -1 | | 1 | uA | Tamb=25℃; VI=VIH or VIL; VCC=6.0V; VO=VCC or GND | 5 |
| supply current | ICC | | | 8 | uA | Tamb=25℃; VI=VCC or GND; IO=0A; VCC=6.0V | 5 |
| HIGH-level input voltage | VIH | 1.5 | | | V | Tamb=-40℃ to +125℃; VCC=2.0V | 7 |
| HIGH-level input voltage | VIH | 3.15 | | | V | Tamb=-40℃ to +125℃; VCC=4.5V | 7 |
| HIGH-level input voltage | VIH | 4.2 | | | V | Tamb=-40℃ to +125℃; VCC=6.0V | 7 |
| LOW-level input voltage | VIL | | | 0.5 | V | Tamb=-40℃ to +125℃; VCC=2.0V | 7 |
| LOW-level input voltage | VIL | | | 1.35 | V | Tamb=-40℃ to +125℃; VCC=4.5V | 7 |
| LOW-level input voltage | VIL | | | 1.8 | V | Tamb=-40℃ to +125℃; VCC=6.0V | 7 |
| HIGH-level output voltage | VOH | 1.9 | | | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-20uA; VCC=2.0V | 7 |
| HIGH-level output voltage | VOH | 4.4 | | | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-20uA; VCC=4.5V | 7 |
| HIGH-level output voltage | VOH | 5.9 | | | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-20uA; VCC=6.0V | 7 |
| HIGH-level output voltage | VOH | 3.7 | | | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-6.0mA; VCC=4.5V | 7 |
| HIGH-level output voltage | VOH | 5.2 | | | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=-7.8mA; VCC=6.0V | 7 |
| LOW-level output voltage | VOL | | | 0.1 | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=20uA; VCC=2.0V | 7 |
| LOW-level output voltage | VOL | | | 0.4 | V | Tamb=-40℃ to +125℃; VI = VIH or VIL; IO=6.0mA; VCC=4.5V | 7 |
| input leakage current | II | -1 | | 1 | uA | Tamb=-40℃ to +125℃; VI=VCC or GND; VCC=6.0V | 7 |
| OFF-state output current | IOZ | -10 | | 10 | uA | Tamb=-40℃ to +125℃; VI=VIH or VIL; VCC=6.0V; VO=VCC or GND | 7 |
| supply current | ICC | | | 160 | uA | Tamb=-40℃ to +125℃; VI=VCC or GND; IO=0A; VCC=6.0V | 7 |
| propagation delay nA to nY | tpd | | | 150 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=2.0V | 10 |
| propagation delay nA to nY | tpd | | | 30 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=4.5V | 10 |
| propagation delay nA to nY | tpd | | | 26 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=6.0V | 10 |
| output enable time OEn to nY | ten | | | 225 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=2.0V | 10 |
| output enable time OEn to nY | ten | | | 45 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=4.5V | 10 |
| output enable time OEn to nY | ten | | | 38 | ns | Tamb=-40℃ to +125℃; CL=50pF; VCC=6.0V | 10 |
## CAD (KiCad official)
- Symbol: `SN74HC366N`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files: `sn74hc366n-etched.step` / `sn74hc366n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74hc366n.step` / `sn74hc366n.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XBLW datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602767360286089216) (16 pp, sha256 `add03243e0522bf3`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74hc366n-datasheet.pdf)