component
SN74F244DWR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74F244DWR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · SOIC-20-300mil
SN74F244DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{1OE} | input | Active-low output-enable for bank 1; LOW passes 1A inputs to 1Y outputs, HIGH forces 1Y1-1Y4 to high-impedance; IIL = −1 mA at VI = 0.5 V. |
| 2 | 1A1 | input | Data input A1 for bank 1; drives 1Y1 when 1OE is LOW; VIH ≥ 2 V, VIL ≤ 0.8 V, IIL = −1.6 mA. |
| 3 | 2Y4 | tri_state | 3-state non-inverting output Y4 of bank 2; IOH = −15 mA, IOL = 64 mA; high-impedance when 2OE is HIGH. |
| 4 | 1A2 | input | Data input A2 for bank 1; drives 1Y2 when 1OE is LOW; VIH ≥ 2 V, VIL ≤ 0.8 V, IIL = −1.6 mA. |
| 5 | 2Y3 | tri_state | 3-state non-inverting output Y3 of bank 2; IOH = −15 mA, IOL = 64 mA; high-impedance when 2OE is HIGH. |
| 6 | 1A3 | input | Data input A3 for bank 1; drives 1Y3 when 1OE is LOW; VIH ≥ 2 V, VIL ≤ 0.8 V, IIL = −1.6 mA. |
| 7 | 2Y2 | tri_state | 3-state non-inverting output Y2 of bank 2; IOH = −15 mA, IOL = 64 mA; high-impedance when 2OE is HIGH. |
| 8 | 1A4 | input | Data input A4 for bank 1; drives 1Y4 when 1OE is LOW; VIH ≥ 2 V, VIL ≤ 0.8 V, IIL = −1.6 mA. |
| 9 | 2Y1 | tri_state | 3-state non-inverting output Y1 of bank 2; IOH = −15 mA, IOL = 64 mA; high-impedance when 2OE is HIGH. |
| 10 | GND | power_in | Ground reference, 0 V. |
| 11 | 2A1 | input | Data input A1 for bank 2; drives 2Y1 when 2OE is LOW; VIH ≥ 2 V, VIL ≤ 0.8 V, IIL = −1.6 mA. |
| 12 | 1Y4 | tri_state | 3-state non-inverting output Y4 of bank 1; IOH = −15 mA, IOL = 64 mA; high-impedance when 1OE is HIGH. |
| 13 | 2A2 | input | Data input A2 for bank 2; drives 2Y2 when 2OE is LOW; VIH ≥ 2 V, VIL ≤ 0.8 V, IIL = −1.6 mA. |
| 14 | 1Y3 | tri_state | 3-state non-inverting output Y3 of bank 1; IOH = −15 mA, IOL = 64 mA; high-impedance when 1OE is HIGH. |
| 15 | 2A3 | input | Data input A3 for bank 2; drives 2Y3 when 2OE is LOW; VIH ≥ 2 V, VIL ≤ 0.8 V, IIL = −1.6 mA. |
| 16 | 1Y2 | tri_state | 3-state non-inverting output Y2 of bank 1; IOH = −15 mA, IOL = 64 mA; high-impedance when 1OE is HIGH. |
| 17 | 2A4 | input | Data input A4 for bank 2; drives 2Y4 when 2OE is LOW; VIH ≥ 2 V, VIL ≤ 0.8 V, IIL = −1.6 mA. |
| 18 | 1Y1 | tri_state | 3-state non-inverting output Y1 of bank 1; IOH = −15 mA, IOL = 64 mA; high-impedance when 1OE is HIGH. |
| 19 | ~{2OE} | input | Active-low output-enable for bank 2; LOW passes 2A inputs to 2Y outputs, HIGH forces 2Y1-2Y4 to high-impedance; IIL = −1 mA at VI = 0.5 V. |
| 20 | VCC | power_in | Supply voltage; recommended operating range 4.5 V to 5.5 V (nominal 5 V), absolute maximum −0.5 V to 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74F244DWR - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
sn74f244dwr-etched.step/sn74f244dwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74f244dwr.step/sn74f244dwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
5f6a9410e790171e, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).