Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
SN74CB3T3245DBQR
Texas Instruments · Signal Switches, Multiplexers, Decoders · SSOP-20-150mil
SN74CB3T3245DBQR from Texas Instruments, in a SSOP-20-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected; the datasheet lists no function for this pin. |
| 2 | A1 | bidirectional | Switch 1A terminal; it connects to B1 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 3 | A2 | bidirectional | Switch 2A terminal; it connects to B2 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 4 | A3 | bidirectional | Switch 3A terminal; it connects to B3 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 5 | A4 | bidirectional | Switch 4A terminal; it connects to B4 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 6 | A5 | bidirectional | Switch 5A terminal; it connects to B5 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 7 | A6 | bidirectional | Switch 6A terminal; it connects to B6 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 8 | A7 | bidirectional | Switch 7A terminal; it connects to B7 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 9 | A8 | bidirectional | Switch 8A terminal; it connects to B8 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 10 | GND | power_in | Ground; all device voltages are referenced to this pin. |
| 11 | B8 | bidirectional | Switch 8 B terminal; it connects to A8 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 12 | B7 | bidirectional | Switch 7 B terminal; it connects to A7 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 13 | B6 | bidirectional | Switch 6 B terminal; it connects to A6 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 14 | B5 | bidirectional | Switch 5 B terminal; it connects to A5 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 15 | B4 | bidirectional | Switch 4 B terminal; it connects to A4 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 16 | B3 | bidirectional | Switch 3 B terminal; it connects to A3 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 17 | B2 | bidirectional | Switch 2 B terminal; it connects to A2 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 18 | B1 | bidirectional | Switch 1 B terminal; it connects to A1 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation. |
| 19 | OE | input | Output enable, active low; when low the A and B ports are connected, and when high the ports are high-impedance, with OE tied to VCC through a pullup resistor to hold the high-impedance state during power up or power down. |
| 20 | VCC | power_in | Supply voltage, with a recommended operating range of 2.3 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20-150mil |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC | VCC | 2.3 | 3.6 | V | 4 | ||
| High-level control input voltage, VCC = 2.3 V to 2.7 V | VIH | 1.7 | 5.5 | V | VCC = 2.3 V to 2.7 V | 4 | |
| High-level control input voltage, VCC = 2.7 V to 3.6 V | VIH | 2 | 5.5 | V | VCC = 2.7 V to 3.6 V | 4 | |
| Low-level control input voltage, VCC = 2.3 V to 2.7 V | VIL | 0 | 0.7 | V | VCC = 2.3 V to 2.7 V | 4 | |
| Low-level control input voltage, VCC = 2.7 V to 3.6 V | VIL | 0 | 0.8 | V | VCC = 2.7 V to 3.6 V | 4 | |
| Data input/output voltage | VI/O | 0 | 5.5 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Supply voltage | VCC | -0.5 | 7 | V | Voltage with respect to ground | 4 | |
| Control input voltage | VIN | -0.5 | 7 | V | Voltage with respect to ground | 4 | |
| Switch I/O voltage | VI/O | -0.5 | 7 | V | Voltage with respect to ground | 4 | |
| Control input clamp current | IIK | -50 | mA | VIN < 0 | 4 | ||
| I/O port clamp current | II/OK | -50 | mA | VI/O < 0 | 4 | ||
| ON-state switch current | II/O | -128 | 128 | mA | 4 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Control inputs leakage current | IIN | -10 | 10 | µA | VCC = 3.6 V, VIN = 3.6 V to 5.5 V or GND | 5 | |
| Switch ON leakage current | II | -20 | 20 | µA | VCC = 3.6 V, switch ON, VIN = VCC or GND, VI = VCC, 0.7 V to 5.5 V | 5 | |
| Switch ON leakage current | II | -40 | µA | VCC = 3.6 V, switch ON, VIN = VCC or GND, VI = 0.7 V to VCC, 0.7 V | 5 | ||
| Switch ON leakage current | II | -5 | 5 | µA | VCC = 3.6 V, switch ON, VIN = VCC or GND, VI = 0 to 0.7 V | 5 | |
| Off-state I/O leakage current (includes input leakage) | IOZ | -10 | 10 | µA | VCC = 3.6 V, VO = 0 to 5.5 V, VI = 0, switch OFF, VIN = VCC or GND | 5 | |
| Partial power-down leakage current | Ioff | 10 | µA | VCC = 0, VO = 0 to 5.5 V, VI = 0 | 5 | ||
| Quiescent supply current | ICC | 40 | µA | VCC = 3.6 V, II/O = 0, switch ON or OFF, VIN = VCC or GND, VI = VCC or GND | 5 | ||
| Increase in supply current per TTL-level control input | ΔICC | 300 | µA | VCC = 3 V to 3.6 V, one input at VCC, 0.6 V, other inputs at VCC or GND | 5 | ||
| ON-state resistance | ron | 5 | 8.5 | Ω | VCC = 2.3 V, VI = 0, IO = 24 mA (typ at VCC = 2.5 V) | 5 | |
| ON-state resistance | ron | 5 | 7 | Ω | VCC = 3 V, VI = 0, IO = 64 mA | 5 | |
| Output enable to A or B turn-on time, 2.5 V ± 0.2 V | ten | 11.7 | ns | 85 °C; ZL: RL = 250 Ω, CL = 30 pF, Vload = VCC; ZH: RL = 500 Ω, CL = 30 pF, Vload = GND; 50 Ω termination at input | 5 | ||
| Output enable to A or B turn-on time, 3.3 V ± 0.3 V | ten | 8 | ns | 85 °C; ZL: RL = 250 Ω, CL = 50 pF, Vload = VCC; ZH: RL = 500 Ω, CL = 50 pF, Vload = GND; 50 Ω termination at input | 6 | ||
| Output enable to A or B disable time, 2.5 V ± 0.2 V | tdis | 1 | 8 | ns | 85 °C; LZ: RL = 250 Ω, CL = 30 pF, Vload = VCC, Vt = 0.15 V; HZ: RL = 500 Ω, CL = 30 pF, Vload = GND, Vt = 0.15 V; 50 Ω termination at input | 6 | |
| Output enable to A or B disable time, 3.3 V ± 0.3 V | tdis | 1 | 8.8 | ns | 85 °C; LZ: RL = 250 Ω, CL = 50 pF, Vload = VCC, Vt = 0.3 V; HZ: RL = 500 Ω, CL = 50 pF, Vload = GND, Vt = 0.3 V; 50 Ω termination at input | 6 | |
| Junction-to-ambient thermal resistance (DBQ, SSOP-20) | RθJA | 102.4 | °C/W | DBQ (SSOP) 20-pin package | 5 |
CAD (KiCad official)
- Symbol:
SN74CB3T3245DBQR - Footprint:
Package_SO:SSOP-20_3.9x8.7mm_P0.635mm - 3D model: SSOP-20-150mil (KiCad packages3D, STEP)
- 3D model files:
sn74cb3t3245dbqr-etched.step/sn74cb3t3245dbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74cb3t3245dbqr.step/sn74cb3t3245dbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
be4bb22c4c003319, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).