Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74CB3T3245DBQR

Texas Instruments · Signal Switches, Multiplexers, Decoders · SSOP-20-150mil

SN74CB3T3245DBQR from Texas Instruments, in a SSOP-20-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not internally connected; the datasheet lists no function for this pin.
2 A1 bidirectional Switch 1A terminal; it connects to B1 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
3 A2 bidirectional Switch 2A terminal; it connects to B2 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
4 A3 bidirectional Switch 3A terminal; it connects to B3 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
5 A4 bidirectional Switch 4A terminal; it connects to B4 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
6 A5 bidirectional Switch 5A terminal; it connects to B5 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
7 A6 bidirectional Switch 6A terminal; it connects to B6 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
8 A7 bidirectional Switch 7A terminal; it connects to B7 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
9 A8 bidirectional Switch 8A terminal; it connects to B8 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
10 GND power_in Ground; all device voltages are referenced to this pin.
11 B8 bidirectional Switch 8 B terminal; it connects to A8 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
12 B7 bidirectional Switch 7 B terminal; it connects to A7 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
13 B6 bidirectional Switch 6 B terminal; it connects to A6 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
14 B5 bidirectional Switch 5 B terminal; it connects to A5 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
15 B4 bidirectional Switch 4 B terminal; it connects to A4 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
16 B3 bidirectional Switch 3 B terminal; it connects to A3 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
17 B2 bidirectional Switch 2 B terminal; it connects to A2 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
18 B1 bidirectional Switch 1 B terminal; it connects to A1 when OE is low and is high-impedance when OE is high, with I/O rated 0 to 5.5 V in recommended operation.
19 OE input Output enable, active low; when low the A and B ports are connected, and when high the ports are high-impedance, with OE tied to VCC through a pullup resistor to hold the high-impedance state during power up or power down.
20 VCC power_in Supply voltage, with a recommended operating range of 2.3 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-20-150mil
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC VCC 2.3 3.6 V 4
High-level control input voltage, VCC = 2.3 V to 2.7 V VIH 1.7 5.5 V VCC = 2.3 V to 2.7 V 4
High-level control input voltage, VCC = 2.7 V to 3.6 V VIH 2 5.5 V VCC = 2.7 V to 3.6 V 4
Low-level control input voltage, VCC = 2.3 V to 2.7 V VIL 0 0.7 V VCC = 2.3 V to 2.7 V 4
Low-level control input voltage, VCC = 2.7 V to 3.6 V VIL 0 0.8 V VCC = 2.7 V to 3.6 V 4
Data input/output voltage VI/O 0 5.5 V 4
Operating free-air temperature TA -40 85 °C 4
Supply voltage VCC -0.5 7 V Voltage with respect to ground 4
Control input voltage VIN -0.5 7 V Voltage with respect to ground 4
Switch I/O voltage VI/O -0.5 7 V Voltage with respect to ground 4
Control input clamp current IIK -50 mA VIN < 0 4
I/O port clamp current II/OK -50 mA VI/O < 0 4
ON-state switch current II/O -128 128 mA 4
Continuous current through VCC or GND -100 100 mA 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Control inputs leakage current IIN -10 10 µA VCC = 3.6 V, VIN = 3.6 V to 5.5 V or GND 5
Switch ON leakage current II -20 20 µA VCC = 3.6 V, switch ON, VIN = VCC or GND, VI = VCC, 0.7 V to 5.5 V 5
Switch ON leakage current II -40 µA VCC = 3.6 V, switch ON, VIN = VCC or GND, VI = 0.7 V to VCC, 0.7 V 5
Switch ON leakage current II -5 5 µA VCC = 3.6 V, switch ON, VIN = VCC or GND, VI = 0 to 0.7 V 5
Off-state I/O leakage current (includes input leakage) IOZ -10 10 µA VCC = 3.6 V, VO = 0 to 5.5 V, VI = 0, switch OFF, VIN = VCC or GND 5
Partial power-down leakage current Ioff 10 µA VCC = 0, VO = 0 to 5.5 V, VI = 0 5
Quiescent supply current ICC 40 µA VCC = 3.6 V, II/O = 0, switch ON or OFF, VIN = VCC or GND, VI = VCC or GND 5
Increase in supply current per TTL-level control input ΔICC 300 µA VCC = 3 V to 3.6 V, one input at VCC, 0.6 V, other inputs at VCC or GND 5
ON-state resistance ron 5 8.5 Ω VCC = 2.3 V, VI = 0, IO = 24 mA (typ at VCC = 2.5 V) 5
ON-state resistance ron 5 7 Ω VCC = 3 V, VI = 0, IO = 64 mA 5
Output enable to A or B turn-on time, 2.5 V ± 0.2 V ten 11.7 ns 85 °C; ZL: RL = 250 Ω, CL = 30 pF, Vload = VCC; ZH: RL = 500 Ω, CL = 30 pF, Vload = GND; 50 Ω termination at input 5
Output enable to A or B turn-on time, 3.3 V ± 0.3 V ten 8 ns 85 °C; ZL: RL = 250 Ω, CL = 50 pF, Vload = VCC; ZH: RL = 500 Ω, CL = 50 pF, Vload = GND; 50 Ω termination at input 6
Output enable to A or B disable time, 2.5 V ± 0.2 V tdis 1 8 ns 85 °C; LZ: RL = 250 Ω, CL = 30 pF, Vload = VCC, Vt = 0.15 V; HZ: RL = 500 Ω, CL = 30 pF, Vload = GND, Vt = 0.15 V; 50 Ω termination at input 6
Output enable to A or B disable time, 3.3 V ± 0.3 V tdis 1 8.8 ns 85 °C; LZ: RL = 250 Ω, CL = 50 pF, Vload = VCC, Vt = 0.3 V; HZ: RL = 500 Ω, CL = 50 pF, Vload = GND, Vt = 0.3 V; 50 Ω termination at input 6
Junction-to-ambient thermal resistance (DBQ, SSOP-20) RθJA 102.4 °C/W DBQ (SSOP) 20-pin package 5

CAD (KiCad official)

  • Symbol: SN74CB3T3245DBQR
  • Footprint: Package_SO:SSOP-20_3.9x8.7mm_P0.635mm
  • 3D model: SSOP-20-150mil (KiCad packages3D, STEP)
  • 3D model files: sn74cb3t3245dbqr-etched.step / sn74cb3t3245dbqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74cb3t3245dbqr.step / sn74cb3t3245dbqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 be4bb22c4c003319, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF