main
Ray Initial commit: component/sn74aup2g80dcur c38968f

SN74AUP2G80DCUR

Texas Instruments · Flip Flops · VSSOP-8

SN74AUP2G80DCUR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1CLK input Clock input for flip-flop 1, data transfers to 1Q on the positive-going edge; input voltage 0 to 3.6 V and unused inputs must be held at VCC or GND.
2 1D input Data input for flip-flop 1, must meet setup time before CLK rising edge; input voltage 0 to 3.6 V.
3 2Q output Output of flip-flop 2, rated for up to ±4 mA at VCC = 3 V with Ioff partial-power-down protection.
4 GND power_in Ground pin; continuous current through VCC or GND is limited to ±50 mA.
5 2CLK input Clock input for flip-flop 2, data transfers to 2Q on the positive-going edge; input voltage 0 to 3.6 V and unused inputs must be held at VCC or GND.
6 2D input Data input for flip-flop 2, must meet setup time before CLK rising edge; input voltage 0 to 3.6 V.
7 1Q output Output of flip-flop 1, rated for up to ±4 mA at VCC = 3 V with Ioff partial-power-down protection.
8 VCC power_in Supply voltage pin with recommended operating range of 0.8 V to 3.6 V (absolute maximum 4.6 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Logic
Pins 8

CAD (KiCad official)

  • Symbol: SN74AUP2G80DCUR
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: sn74aup2g80dcur-etched.step / sn74aup2g80dcur-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74aup2g80dcur.step / sn74aup2g80dcur.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 67f3dd160b99405e, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF