component
SN74AUP2G80DCUR
Public Made by Adomby adom
Texas Instruments Flip Flops, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74AUP2G80DCUR
Texas Instruments · Flip Flops · VSSOP-8
SN74AUP2G80DCUR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1CLK | input | Clock input for flip-flop 1, data transfers to 1Q on the positive-going edge; input voltage 0 to 3.6 V and unused inputs must be held at VCC or GND. |
| 2 | 1D | input | Data input for flip-flop 1, must meet setup time before CLK rising edge; input voltage 0 to 3.6 V. |
| 3 | 2Q | output | Output of flip-flop 2, rated for up to ±4 mA at VCC = 3 V with Ioff partial-power-down protection. |
| 4 | GND | power_in | Ground pin; continuous current through VCC or GND is limited to ±50 mA. |
| 5 | 2CLK | input | Clock input for flip-flop 2, data transfers to 2Q on the positive-going edge; input voltage 0 to 3.6 V and unused inputs must be held at VCC or GND. |
| 6 | 2D | input | Data input for flip-flop 2, must meet setup time before CLK rising edge; input voltage 0 to 3.6 V. |
| 7 | 1Q | output | Output of flip-flop 1, rated for up to ±4 mA at VCC = 3 V with Ioff partial-power-down protection. |
| 8 | VCC | power_in | Supply voltage pin with recommended operating range of 0.8 V to 3.6 V (absolute maximum 4.6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Logic |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SN74AUP2G80DCUR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
sn74aup2g80dcur-etched.step/sn74aup2g80dcur-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74aup2g80dcur.step/sn74aup2g80dcur.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
67f3dd160b99405e, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).