main
Ray sn74auc1g17yzpr: CAD wording names the Adom_Gen land, not KiCad official ed13446

SN74AUC1G17YZPR

Texas Instruments · Buffers, Drivers, Receivers, Transceivers · DSBGA-5(0.9x1.4)

SN74AUC1G17YZPR from Texas Instruments, in a DSBGA-5(0.9x1.4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
A1 DNU unconnected Do not use: this ball is marked DNU in the datasheet and must not be connected.
A2 VCC power_in Positive supply; the device is designed for 1.65-V to 1.95-V VCC operation and is operational from 0.8 V to 2.7 V.
B1 A input Logic input of the Schmitt-trigger buffer; the input is 3.6-V I/O tolerant and has Ioff back-drive protection.
C1 GND power_in Ground reference for the device.
C2 Y output Buffered output of the single Schmitt-trigger buffer, Y = A, with ±8-mA output drive at 1.8 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package DSBGA-5(0.9x1.4)
Category Logic
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Positive-going input threshold voltage VT+ 0.5 V VCC = 0.8 V 5
Positive-going input threshold voltage VT+ 0.51 0.86 V VCC = 1.1 V 5
Positive-going input threshold voltage VT+ 0.65 1 V VCC = 1.4 V 5
Positive-going input threshold voltage VT+ 0.79 1.16 V VCC = 1.65 V 5
Positive-going input threshold voltage VT+ 1.11 1.56 V VCC = 2.3 V 5
Negative-going input threshold voltage VT- 0.3 V VCC = 0.8 V 5
Negative-going input threshold voltage VT- 0.22 0.53 V VCC = 1.1 V 5
Negative-going input threshold voltage VT- 0.3 0.58 V VCC = 1.4 V 5
Negative-going input threshold voltage VT- 0.39 0.62 V VCC = 1.65 V 5
Negative-going input threshold voltage VT- 0.58 0.87 V VCC = 2.3 V 5
Hysteresis (VT+, VT-) ΔVT 0.21 V VCC = 0.8 V 5
Hysteresis (VT+, VT-) ΔVT 0.25 0.38 V VCC = 1.1 V 5
Hysteresis (VT+, VT-) ΔVT 0.31 0.5 V VCC = 1.4 V 5
Hysteresis (VT+, VT-) ΔVT 0.37 0.62 V VCC = 1.65 V 5
Hysteresis (VT+, VT-) ΔVT 0.48 0.77 V VCC = 2.3 V 5
High-level output voltage VOH 0.55 V IOH = -0.7 mA, VCC = 0.8 V 5
High-level output voltage VOH 0.8 V IOH = -3 mA, VCC = 1.1 V 5
High-level output voltage VOH 1 V IOH = -5 mA, VCC = 1.4 V 5
High-level output voltage VOH 1.2 V IOH = -8 mA, VCC = 1.65 V 5
High-level output voltage VOH 1.8 V IOH = -9 mA, VCC = 2.3 V 5
Low-level output voltage VOL 0.2 V IOL = 100 µA, VCC = 0.8 V to 2.7 V 5
Low-level output voltage VOL 0.25 V IOL = 0.7 mA, VCC = 0.8 V 5
Low-level output voltage VOL 0.3 V IOL = 3 mA, VCC = 1.1 V 5
Low-level output voltage VOL 0.4 V IOL = 5 mA, VCC = 1.4 V 5
Low-level output voltage VOL 0.45 V IOL = 8 mA, VCC = 1.65 V 5
Low-level output voltage VOL 0.6 V IOL = 9 mA, VCC = 2.3 V 5
A input current II -5 5 µA VI = VCC or GND, VCC 0 to 2.7 V 5
Power-off leakage current Ioff -10 10 µA VI or VO = 2.7 V, VCC = 0 5
Quiescent supply current ICC 10 µA VI = VCC or GND, IO = 0, VCC 0.8 V to 2.7 V 5
Supply voltage VCC 0.8 2.7 V 4
Input voltage VI 0 3.6 V 4
Output voltage VO 0 V 4
High-level output current IOH -0.7 mA VCC = 0.8 V 4
High-level output current IOH -3 mA VCC = 1.1 V 4
High-level output current IOH -5 mA VCC = 1.4 V 4
High-level output current IOH -8 mA VCC = 1.65 V 4
High-level output current IOH -9 mA VCC = 2.3 V 4
Low-level output current IOL 0.7 mA VCC = 0.8 V 4
Low-level output current IOL 3 mA VCC = 1.1 V 4
Low-level output current IOL 5 mA VCC = 1.4 V 4
Low-level output current IOL 8 mA VCC = 1.65 V 4
Low-level output current IOL 9 mA VCC = 2.3 V 4
Operating free-air temperature TA -40 85 °C 4
Supply voltage VCC -0.5 3.6 V 4
Input voltage VI -0.5 3.6 V 4
Voltage range applied to any output in the high impedance or power-off state VO -0.5 3.6 V 4
Output voltage VO -0.5 V 4
Input clamp current IIK -50 mA VI < 0 4
Output clamp current IOK -50 mA VO < 0 4
Continuous output current IO -20 20 mA 4
Continuous current through VCC or GND -100 100 mA 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance (DSBGA, YZP) RθJA 132 °C/W 5
Propagation delay A to Y tpd 0.8 3.9 ns CL = 15 pF, VCC = 1.2 V ± 0.1 V 6
Propagation delay A to Y tpd 0.7 2.1 ns CL = 15 pF, VCC = 1.5 V ± 0.1 V 6
Propagation delay A to Y tpd 0.6 1.1 1.9 ns CL = 15 pF, VCC = 1.8 V ± 0.15 V 6
Propagation delay A to Y tpd 0.5 1.5 ns CL = 15 pF, VCC = 2.5 V ± 0.2 V 6
Propagation delay A to Y tpd 0.8 1.4 2.4 ns CL = 30 pF, VCC = 1.8 V ± 0.15 V 6
Propagation delay A to Y tpd 0.7 2.5 ns CL = 30 pF, VCC = 2.5 V ± 0.2 V 6

CAD (Adom-generated)

  • Symbol: SN74AUC1G17YZPR
  • Footprint: Adom_Gen:Texas_Instruments_SN74
  • 3D model: generated to fit the land (STEP)
  • 3D model files: sn74auc1g17yzpr-etched.step / sn74auc1g17yzpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74auc1g17yzpr.step / sn74auc1g17yzpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 87edac67385b28c1, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF