SN74AUC1G17YZPR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, DSBGA-5(0.9x1.4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
SN74AUC1G17YZPR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · DSBGA-5(0.9x1.4)
SN74AUC1G17YZPR from Texas Instruments, in a DSBGA-5(0.9x1.4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| A1 | DNU | unconnected | Do not use: this ball is marked DNU in the datasheet and must not be connected. |
| A2 | VCC | power_in | Positive supply; the device is designed for 1.65-V to 1.95-V VCC operation and is operational from 0.8 V to 2.7 V. |
| B1 | A | input | Logic input of the Schmitt-trigger buffer; the input is 3.6-V I/O tolerant and has Ioff back-drive protection. |
| C1 | GND | power_in | Ground reference for the device. |
| C2 | Y | output | Buffered output of the single Schmitt-trigger buffer, Y = A, with ±8-mA output drive at 1.8 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DSBGA-5(0.9x1.4) |
| Category | Logic |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive-going input threshold voltage | VT+ | 0.5 | V | VCC = 0.8 V | 5 | ||
| Positive-going input threshold voltage | VT+ | 0.51 | 0.86 | V | VCC = 1.1 V | 5 | |
| Positive-going input threshold voltage | VT+ | 0.65 | 1 | V | VCC = 1.4 V | 5 | |
| Positive-going input threshold voltage | VT+ | 0.79 | 1.16 | V | VCC = 1.65 V | 5 | |
| Positive-going input threshold voltage | VT+ | 1.11 | 1.56 | V | VCC = 2.3 V | 5 | |
| Negative-going input threshold voltage | VT- | 0.3 | V | VCC = 0.8 V | 5 | ||
| Negative-going input threshold voltage | VT- | 0.22 | 0.53 | V | VCC = 1.1 V | 5 | |
| Negative-going input threshold voltage | VT- | 0.3 | 0.58 | V | VCC = 1.4 V | 5 | |
| Negative-going input threshold voltage | VT- | 0.39 | 0.62 | V | VCC = 1.65 V | 5 | |
| Negative-going input threshold voltage | VT- | 0.58 | 0.87 | V | VCC = 2.3 V | 5 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.21 | V | VCC = 0.8 V | 5 | ||
| Hysteresis (VT+, VT-) | ΔVT | 0.25 | 0.38 | V | VCC = 1.1 V | 5 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.31 | 0.5 | V | VCC = 1.4 V | 5 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.37 | 0.62 | V | VCC = 1.65 V | 5 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.48 | 0.77 | V | VCC = 2.3 V | 5 | |
| High-level output voltage | VOH | 0.55 | V | IOH = -0.7 mA, VCC = 0.8 V | 5 | ||
| High-level output voltage | VOH | 0.8 | V | IOH = -3 mA, VCC = 1.1 V | 5 | ||
| High-level output voltage | VOH | 1 | V | IOH = -5 mA, VCC = 1.4 V | 5 | ||
| High-level output voltage | VOH | 1.2 | V | IOH = -8 mA, VCC = 1.65 V | 5 | ||
| High-level output voltage | VOH | 1.8 | V | IOH = -9 mA, VCC = 2.3 V | 5 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 100 µA, VCC = 0.8 V to 2.7 V | 5 | ||
| Low-level output voltage | VOL | 0.25 | V | IOL = 0.7 mA, VCC = 0.8 V | 5 | ||
| Low-level output voltage | VOL | 0.3 | V | IOL = 3 mA, VCC = 1.1 V | 5 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 5 mA, VCC = 1.4 V | 5 | ||
| Low-level output voltage | VOL | 0.45 | V | IOL = 8 mA, VCC = 1.65 V | 5 | ||
| Low-level output voltage | VOL | 0.6 | V | IOL = 9 mA, VCC = 2.3 V | 5 | ||
| A input current | II | -5 | 5 | µA | VI = VCC or GND, VCC 0 to 2.7 V | 5 | |
| Power-off leakage current | Ioff | -10 | 10 | µA | VI or VO = 2.7 V, VCC = 0 | 5 | |
| Quiescent supply current | ICC | 10 | µA | VI = VCC or GND, IO = 0, VCC 0.8 V to 2.7 V | 5 | ||
| Supply voltage | VCC | 0.8 | 2.7 | V | 4 | ||
| Input voltage | VI | 0 | 3.6 | V | 4 | ||
| Output voltage | VO | 0 | V | 4 | |||
| High-level output current | IOH | -0.7 | mA | VCC = 0.8 V | 4 | ||
| High-level output current | IOH | -3 | mA | VCC = 1.1 V | 4 | ||
| High-level output current | IOH | -5 | mA | VCC = 1.4 V | 4 | ||
| High-level output current | IOH | -8 | mA | VCC = 1.65 V | 4 | ||
| High-level output current | IOH | -9 | mA | VCC = 2.3 V | 4 | ||
| Low-level output current | IOL | 0.7 | mA | VCC = 0.8 V | 4 | ||
| Low-level output current | IOL | 3 | mA | VCC = 1.1 V | 4 | ||
| Low-level output current | IOL | 5 | mA | VCC = 1.4 V | 4 | ||
| Low-level output current | IOL | 8 | mA | VCC = 1.65 V | 4 | ||
| Low-level output current | IOL | 9 | mA | VCC = 2.3 V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Supply voltage | VCC | -0.5 | 3.6 | V | 4 | ||
| Input voltage | VI | -0.5 | 3.6 | V | 4 | ||
| Voltage range applied to any output in the high impedance or power-off state | VO | -0.5 | 3.6 | V | 4 | ||
| Output voltage | VO | -0.5 | V | 4 | |||
| Input clamp current | IIK | -50 | mA | VI < 0 | 4 | ||
| Output clamp current | IOK | -50 | mA | VO < 0 | 4 | ||
| Continuous output current | IO | -20 | 20 | mA | 4 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DSBGA, YZP) | RθJA | 132 | °C/W | 5 | |||
| Propagation delay A to Y | tpd | 0.8 | 3.9 | ns | CL = 15 pF, VCC = 1.2 V ± 0.1 V | 6 | |
| Propagation delay A to Y | tpd | 0.7 | 2.1 | ns | CL = 15 pF, VCC = 1.5 V ± 0.1 V | 6 | |
| Propagation delay A to Y | tpd | 0.6 | 1.1 | 1.9 | ns | CL = 15 pF, VCC = 1.8 V ± 0.15 V | 6 |
| Propagation delay A to Y | tpd | 0.5 | 1.5 | ns | CL = 15 pF, VCC = 2.5 V ± 0.2 V | 6 | |
| Propagation delay A to Y | tpd | 0.8 | 1.4 | 2.4 | ns | CL = 30 pF, VCC = 1.8 V ± 0.15 V | 6 |
| Propagation delay A to Y | tpd | 0.7 | 2.5 | ns | CL = 30 pF, VCC = 2.5 V ± 0.2 V | 6 |
CAD (Adom-generated)
- Symbol:
SN74AUC1G17YZPR - Footprint:
Adom_Gen:Texas_Instruments_SN74 - 3D model: generated to fit the land (STEP)
- 3D model files:
sn74auc1g17yzpr-etched.step/sn74auc1g17yzpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74auc1g17yzpr.step/sn74auc1g17yzpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
87edac67385b28c1, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.