main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sn74alvth16374dlr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sn74alvth16374dlr-etched.glb sn74alvth16374dlr: factory component page (tier=mfr) · Ray
sn74alvth16374dlr-etched.step sn74alvth16374dlr: factory component page (tier=mfr) · Ray
sn74alvth16374dlr-hero.glb sn74alvth16374dlr: hero GLB from the etched model (keeps the MPN mark) · Ray
sn74alvth16374dlr-hero.overlay.json sn74alvth16374dlr: hero GLB from the etched model (keeps the MPN mark) · Ray
sn74alvth16374dlr.glb Publish 0.1.0 · Ray
sn74alvth16374dlr.kicad_mod Publish 0.1.0 · Ray
sn74alvth16374dlr.kicad_sym Publish 0.1.0 · Ray
sn74alvth16374dlr.lbr Publish 0.1.0 · Ray
sn74alvth16374dlr.step Publish 0.1.0 · Ray

SN74ALVTH16374DLR

Texas Instruments · Flip Flops · SSOP-48-300mil

SN74ALVTH16374DLR from Texas Instruments, in a SSOP-48-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OE input Active-low output enable for outputs 1Q1 to 1Q8; when high, the outputs go to high impedance, and OE should be tied to VCC through a pullup resistor to keep the high-impedance state above 1.2 V.
2 1Q1 tri_state Three-state output of channel 1 flip-flop 1D1, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
3 1Q2 tri_state Three-state output of channel 1 flip-flop 1D2, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
4 GND power_in Ground reference for the device.
5 1Q3 tri_state Three-state output of channel 1 flip-flop 1D3, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
6 1Q4 tri_state Three-state output of channel 1 flip-flop 1D4, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
7 VCC power_in Supply voltage: 2.3 V to 2.7 V for 2.5 V operation or 3 V to 3.6 V for 3.3 V operation.
8 1Q5 tri_state Three-state output of channel 1 flip-flop 1D5, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
9 1Q6 tri_state Three-state output of channel 1 flip-flop 1D6, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
10 GND power_in Ground reference for the device.
11 1Q7 tri_state Three-state output of channel 1 flip-flop 1D7, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
12 1Q8 tri_state Three-state output of channel 1 flip-flop 1D8, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
13 2Q1 tri_state Three-state output of channel 2 flip-flop 2D1, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
14 2Q2 tri_state Three-state output of channel 2 flip-flop 2D2, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
15 GND power_in Ground reference for the device.
16 2Q3 tri_state Three-state output of channel 2 flip-flop 2D3, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
17 2Q4 tri_state Three-state output of channel 2 flip-flop 2D4, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
18 VCC power_in Supply voltage: 2.3 V to 2.7 V for 2.5 V operation or 3 V to 3.6 V for 3.3 V operation.
19 2Q5 tri_state Three-state output of channel 2 flip-flop 2D5, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
20 2Q6 tri_state Three-state output of channel 2 flip-flop 2D6, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
21 GND power_in Ground reference for the device.
22 2Q7 tri_state Three-state output of channel 2 flip-flop 2D7, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
23 2Q8 tri_state Three-state output of channel 2 flip-flop 2D8, with high drive of -32 mA high-level and 32 mA low-level at 3.3 V VCC.
24 2OE input Active-low output enable for outputs 2Q1 to 2Q8; when high, the outputs go to high impedance, and OE should be tied to VCC through a pullup resistor to keep the high-impedance state above 1.2 V.
25 2CLK input Clock input for the channel 2 flip-flops; data is stored on the positive (rising) CLK transition, with minimum pulse width of 1.5 ns.
26 2D8 input Data input to channel 2 flip-flop 8; the value is stored on the rising edge of 2CLK, and bus hold holds the input at a valid level when floating.
27 2D7 input Data input to channel 2 flip-flop 7; the value is stored on the rising edge of 2CLK, and bus hold holds the input at a valid level when floating.
28 GND power_in Ground reference for the device.
29 2D6 input Data input to channel 2 flip-flop 6; the value is stored on the rising edge of 2CLK, and bus hold holds the input at a valid level when floating.
30 2D5 input Data input to channel 2 flip-flop 5; the value is stored on the rising edge of 2CLK, and bus hold holds the input at a valid level when floating.
31 VCC power_in Supply voltage: 2.3 V to 2.7 V for 2.5 V operation or 3 V to 3.6 V for 3.3 V operation.
32 2D4 input Data input to channel 2 flip-flop 4; the value is stored on the rising edge of 2CLK, and bus hold holds the input at a valid level when floating.
33 2D3 input Data input to channel 2 flip-flop 3; the value is stored on the rising edge of 2CLK, and bus hold holds the input at a valid level when floating.
34 GND power_in Ground reference for the device.
35 2D2 input Data input to channel 2 flip-flop 2; the value is stored on the rising edge of 2CLK, and bus hold holds the input at a valid level when floating.
36 2D1 input Data input to channel 2 flip-flop 1; the value is stored on the rising edge of 2CLK, and bus hold holds the input at a valid level when floating.
37 1D8 input Data input to channel 1 flip-flop 8; the value is stored on the rising edge of 1CLK, and bus hold holds the input at a valid level when floating.
38 1D7 input Data input to channel 1 flip-flop 7; the value is stored on the rising edge of 1CLK, and bus hold holds the input at a valid level when floating.
39 GND power_in Ground reference for the device.
40 1D6 input Data input to channel 1 flip-flop 6; the value is stored on the rising edge of 1CLK, and bus hold holds the input at a valid level when floating.
41 1D5 input Data input to channel 1 flip-flop 5; the value is stored on the rising edge of 1CLK, and bus hold holds the input at a valid level when floating.
42 VCC power_in Supply voltage: 2.3 V to 2.7 V for 2.5 V operation or 3 V to 3.6 V for 3.3 V operation.
43 1D4 input Data input to channel 1 flip-flop 4; the value is stored on the rising edge of 1CLK, and bus hold holds the input at a valid level when floating.
44 1D3 input Data input to channel 1 flip-flop 3; the value is stored on the rising edge of 1CLK, and bus hold holds the input at a valid level when floating.
45 GND power_in Ground reference for the device.
46 1D2 input Data input to channel 1 flip-flop 2; the value is stored on the rising edge of 1CLK, and bus hold holds the input at a valid level when floating.
47 1D1 input Data input to channel 1 flip-flop 1; the value is stored on the rising edge of 1CLK, and bus hold holds the input at a valid level when floating.
48 1CLK input Clock input for the channel 1 flip-flops; data is stored on the positive (rising) CLK transition, with minimum pulse width of 1.5 ns.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-48-300mil
Category Logic ICs
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 2.3 2.7 V VCC = 2.5 V ± 0.2 V 5
High-level input voltage VIH 1.7 V VCC = 2.5 V ± 0.2 V 5
Low-level input voltage VIL 0.7 V VCC = 2.5 V ± 0.2 V 5
Input voltage VI 0 5.5 V VCC = 2.5 V ± 0.2 V 5
High-level output current IOH -8 mA VCC = 2.5 V ± 0.2 V 5
Low-level output current IOL 8 mA VCC = 2.5 V ± 0.2 V 5
Low-level output current, duty cycle limited IOL 24 mA current duty cycle ≤ 50%; f ≥ 1 kHz 5
Input transition rise or fall rate ∆t/∆v 10 ns/V Outputs enabled 5
Power-up ramp rate ∆t/∆VCC 200 µs/V VCC = 2.5 V ± 0.2 V 5
Operating free-air temperature TA -40 85 °C SN74ALVTH16374 5
Supply voltage VCC 3 3.6 V VCC = 3.3 V ± 0.3 V 5
High-level input voltage VIH 2 V VCC = 3.3 V ± 0.3 V 5
Low-level input voltage VIL 0.8 V VCC = 3.3 V ± 0.3 V 5
High-level output current IOH -32 mA VCC = 3.3 V ± 0.3 V 5
Low-level output current IOL 32 mA VCC = 3.3 V ± 0.3 V 5
Low-level output current, duty cycle limited IOL 64 mA current duty cycle ≤ 50%; f ≥ 1 kHz 5
Supply voltage range VCC -0.5 4.6 V 4
Input voltage range VI -0.5 7 V 4
Voltage range applied to any output in the high-impedance or power-off state VO -0.5 7 V 4
Voltage range applied to any output in the high state VO -0.5 7 V 4
Output current in the low state IO 128 mA SN74ALVTH16374 4
Output current in the high state IO -64 mA SN74ALVTH16374 4
Input clamp current IIK -50 mA VI < 0 4
Output clamp current IOK -50 mA VO < 0 4
Package thermal impedance, DL package θJA 94 °C/W DL package; calculated per JESD 51 4
Storage temperature range Tstg -65 150 °C 4
High-level output voltage VOH 1.8 V VCC = 2.3 V, IOH = -8 mA 6
Input clamp voltage VIK -1.2 V VCC = 2.3 V, II = -18 mA 6
Low-level output voltage VOL 0.2 V VCC = 2.3 V to 2.7 V, IOL = 100 µA 6
Low-level output voltage VOL 0.4 V VCC = 2.3 V, IOL = 8 mA 6
Low-level output voltage VOL 0.5 V VCC = 2.3 V, IOL = 24 mA 6
Control inputs input current II -1 1 µA VCC = 2.7 V, VI = VCC or GND 6
Bus-hold low sustaining current IBHL 115 µA VCC = 2.3 V, VI = 0.7 V 6
Bus-hold high sustaining current IBHH -10 µA VCC = 2.3 V, VI = 1.7 V 6
Supply current, outputs high ICC 0.1 mA VCC = 2.7 V, IO = 0, VI = VCC or GND 6
Supply current, outputs low ICC 4.5 mA VCC = 2.7 V, IO = 0, VI = VCC or GND 6
High-level output voltage VOH 2 V VCC = 3 V, IOH = -32 mA 7
Input clamp voltage VIK -1.2 V VCC = 3 V, II = -18 mA 7
Low-level output voltage VOL 0.2 V VCC = 3 V to 3.6 V, IOL = 100 µA 7
Low-level output voltage VOL 0.4 V IOL = 16 mA 7
Low-level output voltage VOL 0.5 V VCC = 3 V, IOL = 32 mA 7
Low-level output voltage VOL 0.55 V IOL = 64 mA 7
Control inputs input current II -1 1 µA VCC = 3.6 V, VI = VCC or GND 7
Bus-hold low sustaining current IBHL 75 µA VCC = 3 V, VI = 0.8 V 7
Supply current, outputs low ICC 3.2 5 mA VCC = 3.6 V, IO = 0, VI = VCC or GND 7
Supply current increase per TTL input ∆ICC 0.4 mA VCC = 3 V to 3.6 V, one input at VCC, 0.6 V, other inputs at VCC or GND 7
Maximum clock frequency fmax 150 MHz CL = 30 pF, VCC = 2.5 V ± 0.2 V 9
Propagation delay CLK to Q tPLH 1.5 3.8 ns CL = 30 pF, VCC = 2.5 V ± 0.2 V 9
Enable time OE to Q tPZH 1 4.1 ns CL = 30 pF, VCC = 2.5 V ± 0.2 V 9
Disable time OE to Q tPHZ 1.8 4.2 ns CL = 30 pF, VCC = 2.5 V ± 0.2 V 9
Maximum clock frequency fmax 250 MHz CL = 50 pF, VCC = 3.3 V ± 0.3 V 9
Propagation delay CLK to Q tPLH 1 3.2 ns CL = 50 pF, VCC = 3.3 V ± 0.3 V 9
Enable time OE to Q tPZH 1 3.8 ns CL = 50 pF, VCC = 3.3 V ± 0.3 V 9
Disable time OE to Q tPHZ 1 4.6 ns CL = 50 pF, VCC = 3.3 V ± 0.3 V 9

CAD (KiCad official)

  • Symbol: SN74ALVTH16374DLR
  • Footprint: Package_SO:SSOP-48_7.5x15.9mm_P0.635mm
  • 3D model: SSOP-48-300mil (KiCad packages3D, STEP)
  • 3D model files: sn74alvth16374dlr-etched.step / sn74alvth16374dlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74alvth16374dlr.step / sn74alvth16374dlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (19 pp, sha256 e2900bdbb666b19c, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF