main
Ray
Initial commit: component/sn74act373pwr
aa75834
SN74ACT373PWR
Texas Instruments · Latches · TSSOP-20
SN74ACT373PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output Enable input, active low; OE = L enables normal 3-state output operation, OE = H places all outputs in high-impedance state |
| 2 | 1Q | tri_state | Q output of latch 1, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 3 | 1D | input | Data input for latch 1; sampled when LE = H and latched when LE = L |
| 4 | 2D | input | Data input for latch 2; sampled when LE = H and latched when LE = L |
| 5 | 2Q | tri_state | Q output of latch 2, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 6 | 3Q | tri_state | Q output of latch 3, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 7 | 3D | input | Data input for latch 3; sampled when LE = H and latched when LE = L |
| 8 | 4D | input | Data input for latch 4; sampled when LE = H and latched when LE = L |
| 9 | 4Q | tri_state | Q output of latch 4, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 10 | GND | power_in | Ground reference voltage |
| 11 | LE | input | Latch Enable input, active high; LE = H enables transparent mode (Q follows D), LE = L latches Q at current D state |
| 12 | 5Q | tri_state | Q output of latch 5, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 13 | 5D | input | Data input for latch 5; sampled when LE = H and latched when LE = L |
| 14 | 6D | input | Data input for latch 6; sampled when LE = H and latched when LE = L |
| 15 | 6Q | tri_state | Q output of latch 6, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 16 | 7Q | tri_state | Q output of latch 7, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 17 | 7D | input | Data input for latch 7; sampled when LE = H and latched when LE = L |
| 18 | 8D | input | Data input for latch 8; sampled when LE = H and latched when LE = L |
| 19 | 8Q | tri_state | Q output of latch 8, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 20 | VCC | power_in | Power supply voltage, recommended operating range 4.5 V to 5.5 V per Section 4.2 |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74ACT373PWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
sn74act373pwr-etched.step/sn74act373pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74act373pwr.step/sn74act373pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
40715ded7a1ca192, retrieved 2026-09-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74ACT373PWR
**Texas Instruments** · Latches · TSSOP-20
SN74ACT373PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output Enable input, active low; OE = L enables normal 3-state output operation, OE = H places all outputs in high-impedance state |
| 2 | 1Q | tri_state | Q output of latch 1, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 3 | 1D | input | Data input for latch 1; sampled when LE = H and latched when LE = L |
| 4 | 2D | input | Data input for latch 2; sampled when LE = H and latched when LE = L |
| 5 | 2Q | tri_state | Q output of latch 2, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 6 | 3Q | tri_state | Q output of latch 3, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 7 | 3D | input | Data input for latch 3; sampled when LE = H and latched when LE = L |
| 8 | 4D | input | Data input for latch 4; sampled when LE = H and latched when LE = L |
| 9 | 4Q | tri_state | Q output of latch 4, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 10 | GND | power_in | Ground reference voltage |
| 11 | LE | input | Latch Enable input, active high; LE = H enables transparent mode (Q follows D), LE = L latches Q at current D state |
| 12 | 5Q | tri_state | Q output of latch 5, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 13 | 5D | input | Data input for latch 5; sampled when LE = H and latched when LE = L |
| 14 | 6D | input | Data input for latch 6; sampled when LE = H and latched when LE = L |
| 15 | 6Q | tri_state | Q output of latch 6, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 16 | 7Q | tri_state | Q output of latch 7, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 17 | 7D | input | Data input for latch 7; sampled when LE = H and latched when LE = L |
| 18 | 8D | input | Data input for latch 8; sampled when LE = H and latched when LE = L |
| 19 | 8Q | tri_state | Q output of latch 8, 3-state output; normal logic levels when OE = L and high-impedance when OE = H |
| 20 | VCC | power_in | Power supply voltage, recommended operating range 4.5 V to 5.5 V per Section 4.2 |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
## CAD (KiCad official)
- Symbol: `SN74ACT373PWR`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `sn74act373pwr-etched.step` / `sn74act373pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74act373pwr.step` / `sn74act373pwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74act373.pdf) (31 pp, sha256 `40715ded7a1ca192`, retrieved 2026-09-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74act373pwr-datasheet.pdf)