main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sn74abt573adwr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
sn74abt573adwr-etched.glb Publish 0.1.0 · Ray
sn74abt573adwr-etched.step sn74abt573adwr: factory component page (tier=mfr) · Ray
sn74abt573adwr-hero.glb sn74abt573adwr: hero GLB from the etched model (keeps the MPN mark) · Ray
sn74abt573adwr-hero.overlay.json Publish 0.1.0 · Ray
sn74abt573adwr.glb Publish 0.1.0 · Ray
sn74abt573adwr.kicad_mod Publish 0.1.0 · Ray
sn74abt573adwr.kicad_sym Publish 0.1.0 · Ray
sn74abt573adwr.lbr Publish 0.1.0 · Ray
sn74abt573adwr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 20 pins · Ray

SN74ABT573ADWR

Texas Instruments · Latches · SOIC-20-300mil

SN74ABT573ADWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Buffered active-low output enable; when high, the eight outputs are placed in the high-impedance state, and it should be tied to VCC through a pullup resistor to ensure high impedance during power up or down.
2 1D input Data input to latch 1, which is transparent while LE is high and holds its value when LE goes low.
3 2D input Data input to latch 2, which is transparent while LE is high and holds its value when LE goes low.
4 3D input Data input to latch 3, which is transparent while LE is high and holds its value when LE goes low.
5 4D input Data input to latch 4, which is transparent while LE is high and holds its value when LE goes low.
6 5D input Data input to latch 5, which is transparent while LE is high and holds its value when LE goes low.
7 6D input Data input to latch 6, which is transparent while LE is high and holds its value when LE goes low.
8 7D input Data input to latch 7, which is transparent while LE is high and holds its value when LE goes low.
9 8D input Data input to latch 8, which is transparent while LE is high and holds its value when LE goes low.
10 GND power_in Ground reference pin for the device.
11 LE input Latch enable; the latches are transparent while LE is high and store the data present on the falling edge of LE.
12 8Q tri_state Output of latch 8, placed in the high-impedance state when OE is high.
13 7Q tri_state Output of latch 7, placed in the high-impedance state when OE is high.
14 6Q tri_state Output of latch 6, placed in the high-impedance state when OE is high.
15 5Q tri_state Output of latch 5, placed in the high-impedance state when OE is high.
16 4Q tri_state Output of latch 4, placed in the high-impedance state when OE is high.
17 3Q tri_state Output of latch 3, placed in the high-impedance state when OE is high.
18 2Q tri_state Output of latch 2, placed in the high-impedance state when OE is high.
19 1Q tri_state Output of latch 1, placed in the high-impedance state when OE is high.
20 VCC power_in Supply voltage pin; recommended supply range is 4.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5.5 V 3
High-level input voltage VIH 2 V 3
Low-level input voltage VIL 0.8 V 3
Input voltage VI 0 V maximum is VCC 3
High-level output current IOH -32 mA SN74ABT573A 3
Low-level output current IOL 64 mA SN74ABT573A 3
Input transition rise or fall rate Δt/Δv 5 ns/V Outputs enabled 3
Operating free-air temperature TA -40 85 °C SN74ABT573A 3
Supply voltage range VCC -0.5 7 V 3
Input voltage range VI -0.5 7 V see Note 1 3
Voltage range applied to any output in the high or power-off state VO -0.5 5.5 V 3
Current into any output in the low state IO 128 mA SN74ABT573A 3
Input clamp current IIK -18 mA VI < 0 3
Output clamp current IOK -50 mA VO < 0 3
Package thermal impedance, DW package θJA 58 °C/W see Note 2, DW package 3
Storage temperature range Tstg -65 150 °C 3
High-level output voltage VOL 0.55 V VCC = 4.5 V, IOL = 48 mA 4
Input clamp voltage VIK -1.2 V VCC = 4.5 V, II = -18 mA 4
Input hysteresis Vhys 100 mV 4
Input current II -1 1 µA VCC = 5.5 V, VI = VCC or GND 4
Off-state output current, high-level voltage applied IOZH 10 µA VCC = 5.5 V, VO = 2.7 V 4
Off-state output current, low-level voltage applied IOZL -10 µA VCC = 5.5 V, VO = 0.5 V 4
Power-off input/output current Ioff -100 100 µA VCC = 0, VI or VO ≤ 4.5 V 4
Output high leakage current ICEX 50 µA VCC = 5.5 V, VO = 5.5 V, outputs high 4
Short-circuit output current IO -50 -180 mA VCC = 5.5 V, VO = 2.5 V 4
Supply current, outputs high ICC 250 µA VCC = 5.5 V, IO = 0, VI = VCC or GND 4
Supply current, outputs low ICC 24 30 mA VCC = 5.5 V, IO = 0, VI = VCC or GND 4
Supply current, outputs disabled ICC 250 µA VCC = 5.5 V, IO = 0, VI = VCC or GND 4
Increase in supply current per input ΔICC 1.5 mA VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND 4
Input capacitance Ci 3.5 pF VI = 2.5 V or 0.5 V 4
Output capacitance Co 6.5 pF VO = 2.5 V or 0.5 V 4
Pulse duration, LE high tw 3.3 ns SN74ABT573A, VCC = 5 V, TA = 25°C 5
Setup time, data before LE↓ high tsu 1.9 ns SN74ABT573A, VCC = 5 V, TA = 25°C 5
Setup time, data before LE↓ low tsu 1.5 ns SN74ABT573A, VCC = 5 V, TA = 25°C 5
Hold time, data after LE↓ th 1.8 ns SN74ABT573A, data-sheet limit may vary among suppliers 5
Propagation delay D to Q, tPLH tPLH 1.9 3.2 5.9 ns CL = 50 pF, SN74ABT573A, full range 5
Propagation delay D to Q, tPHL tPHL 2.2 4.2 6.2 ns CL = 50 pF, SN74ABT573A, full range 5
Propagation delay LE to Q, tPLH tPLH 2.2 4 6.6 ns CL = 50 pF, SN74ABT573A, full range 5
Propagation delay LE to Q, tPHL tPHL 3.2 5.2 7.2 ns CL = 50 pF, SN74ABT573A, full range 5
Enable time OE to Q, tPZH tPZH 1.2 3.2 5.2 ns CL = 50 pF, SN74ABT573A, full range 5
Enable time OE to Q, tPZL tPZL 2.5 4.7 6.7 ns CL = 50 pF, SN74ABT573A, full range, data-sheet limit may vary among suppliers 5
Disable time OE to Q, tPHZ tPHZ 2.5 4.9 7.1 ns CL = 50 pF, SN74ABT573A, full range, data-sheet limit may vary among suppliers 5
Disable time OE to Q, tPLZ tPLZ 2 4.2 6.5 ns CL = 50 pF, SN74ABT573A, full range 5

CAD (KiCad official)

  • Symbol: SN74ABT573ADWR
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: sn74abt573adwr-etched.step / sn74abt573adwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74abt573adwr.step / sn74abt573adwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 498f2e95abd15739, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF