3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74ABT573ADWR
Texas Instruments · Latches · SOIC-20-300mil
SN74ABT573ADWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Buffered active-low output enable; when high, the eight outputs are placed in the high-impedance state, and it should be tied to VCC through a pullup resistor to ensure high impedance during power up or down. |
| 2 | 1D | input | Data input to latch 1, which is transparent while LE is high and holds its value when LE goes low. |
| 3 | 2D | input | Data input to latch 2, which is transparent while LE is high and holds its value when LE goes low. |
| 4 | 3D | input | Data input to latch 3, which is transparent while LE is high and holds its value when LE goes low. |
| 5 | 4D | input | Data input to latch 4, which is transparent while LE is high and holds its value when LE goes low. |
| 6 | 5D | input | Data input to latch 5, which is transparent while LE is high and holds its value when LE goes low. |
| 7 | 6D | input | Data input to latch 6, which is transparent while LE is high and holds its value when LE goes low. |
| 8 | 7D | input | Data input to latch 7, which is transparent while LE is high and holds its value when LE goes low. |
| 9 | 8D | input | Data input to latch 8, which is transparent while LE is high and holds its value when LE goes low. |
| 10 | GND | power_in | Ground reference pin for the device. |
| 11 | LE | input | Latch enable; the latches are transparent while LE is high and store the data present on the falling edge of LE. |
| 12 | 8Q | tri_state | Output of latch 8, placed in the high-impedance state when OE is high. |
| 13 | 7Q | tri_state | Output of latch 7, placed in the high-impedance state when OE is high. |
| 14 | 6Q | tri_state | Output of latch 6, placed in the high-impedance state when OE is high. |
| 15 | 5Q | tri_state | Output of latch 5, placed in the high-impedance state when OE is high. |
| 16 | 4Q | tri_state | Output of latch 4, placed in the high-impedance state when OE is high. |
| 17 | 3Q | tri_state | Output of latch 3, placed in the high-impedance state when OE is high. |
| 18 | 2Q | tri_state | Output of latch 2, placed in the high-impedance state when OE is high. |
| 19 | 1Q | tri_state | Output of latch 1, placed in the high-impedance state when OE is high. |
| 20 | VCC | power_in | Supply voltage pin; recommended supply range is 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5.5 | V | 3 | ||
| High-level input voltage | VIH | 2 | V | 3 | |||
| Low-level input voltage | VIL | 0.8 | V | 3 | |||
| Input voltage | VI | 0 | V | maximum is VCC | 3 | ||
| High-level output current | IOH | -32 | mA | SN74ABT573A | 3 | ||
| Low-level output current | IOL | 64 | mA | SN74ABT573A | 3 | ||
| Input transition rise or fall rate | Δt/Δv | 5 | ns/V | Outputs enabled | 3 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | SN74ABT573A | 3 | |
| Supply voltage range | VCC | -0.5 | 7 | V | 3 | ||
| Input voltage range | VI | -0.5 | 7 | V | see Note 1 | 3 | |
| Voltage range applied to any output in the high or power-off state | VO | -0.5 | 5.5 | V | 3 | ||
| Current into any output in the low state | IO | 128 | mA | SN74ABT573A | 3 | ||
| Input clamp current | IIK | -18 | mA | VI < 0 | 3 | ||
| Output clamp current | IOK | -50 | mA | VO < 0 | 3 | ||
| Package thermal impedance, DW package | θJA | 58 | °C/W | see Note 2, DW package | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| High-level output voltage | VOL | 0.55 | V | VCC = 4.5 V, IOL = 48 mA | 4 | ||
| Input clamp voltage | VIK | -1.2 | V | VCC = 4.5 V, II = -18 mA | 4 | ||
| Input hysteresis | Vhys | 100 | mV | 4 | |||
| Input current | II | -1 | 1 | µA | VCC = 5.5 V, VI = VCC or GND | 4 | |
| Off-state output current, high-level voltage applied | IOZH | 10 | µA | VCC = 5.5 V, VO = 2.7 V | 4 | ||
| Off-state output current, low-level voltage applied | IOZL | -10 | µA | VCC = 5.5 V, VO = 0.5 V | 4 | ||
| Power-off input/output current | Ioff | -100 | 100 | µA | VCC = 0, VI or VO ≤ 4.5 V | 4 | |
| Output high leakage current | ICEX | 50 | µA | VCC = 5.5 V, VO = 5.5 V, outputs high | 4 | ||
| Short-circuit output current | IO | -50 | -180 | mA | VCC = 5.5 V, VO = 2.5 V | 4 | |
| Supply current, outputs high | ICC | 250 | µA | VCC = 5.5 V, IO = 0, VI = VCC or GND | 4 | ||
| Supply current, outputs low | ICC | 24 | 30 | mA | VCC = 5.5 V, IO = 0, VI = VCC or GND | 4 | |
| Supply current, outputs disabled | ICC | 250 | µA | VCC = 5.5 V, IO = 0, VI = VCC or GND | 4 | ||
| Increase in supply current per input | ΔICC | 1.5 | mA | VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND | 4 | ||
| Input capacitance | Ci | 3.5 | pF | VI = 2.5 V or 0.5 V | 4 | ||
| Output capacitance | Co | 6.5 | pF | VO = 2.5 V or 0.5 V | 4 | ||
| Pulse duration, LE high | tw | 3.3 | ns | SN74ABT573A, VCC = 5 V, TA = 25°C | 5 | ||
| Setup time, data before LE↓ high | tsu | 1.9 | ns | SN74ABT573A, VCC = 5 V, TA = 25°C | 5 | ||
| Setup time, data before LE↓ low | tsu | 1.5 | ns | SN74ABT573A, VCC = 5 V, TA = 25°C | 5 | ||
| Hold time, data after LE↓ | th | 1.8 | ns | SN74ABT573A, data-sheet limit may vary among suppliers | 5 | ||
| Propagation delay D to Q, tPLH | tPLH | 1.9 | 3.2 | 5.9 | ns | CL = 50 pF, SN74ABT573A, full range | 5 |
| Propagation delay D to Q, tPHL | tPHL | 2.2 | 4.2 | 6.2 | ns | CL = 50 pF, SN74ABT573A, full range | 5 |
| Propagation delay LE to Q, tPLH | tPLH | 2.2 | 4 | 6.6 | ns | CL = 50 pF, SN74ABT573A, full range | 5 |
| Propagation delay LE to Q, tPHL | tPHL | 3.2 | 5.2 | 7.2 | ns | CL = 50 pF, SN74ABT573A, full range | 5 |
| Enable time OE to Q, tPZH | tPZH | 1.2 | 3.2 | 5.2 | ns | CL = 50 pF, SN74ABT573A, full range | 5 |
| Enable time OE to Q, tPZL | tPZL | 2.5 | 4.7 | 6.7 | ns | CL = 50 pF, SN74ABT573A, full range, data-sheet limit may vary among suppliers | 5 |
| Disable time OE to Q, tPHZ | tPHZ | 2.5 | 4.9 | 7.1 | ns | CL = 50 pF, SN74ABT573A, full range, data-sheet limit may vary among suppliers | 5 |
| Disable time OE to Q, tPLZ | tPLZ | 2 | 4.2 | 6.5 | ns | CL = 50 pF, SN74ABT573A, full range | 5 |
CAD (KiCad official)
- Symbol:
SN74ABT573ADWR - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
sn74abt573adwr-etched.step/sn74abt573adwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74abt573adwr.step/sn74abt573adwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
498f2e95abd15739, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).