Generated by kicad-footprint-generator · KiCad file format 20260206
SN65LVDT2DBVT
Texas Instruments · LVDS ICs · SOT-23-5
SN65LVDT2DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage for the receiver, which operates from 2.4 V to 3.6 V (recommended VCC range 2.4 V to 3.6 V). |
| 2 | GND | power_in | Ground; all voltages are referenced to the network ground terminal. |
| 3 | A | input | Non-inverting LVDS receiver input, with input voltage range 0 to VCC - 0.8 V and differential input magnitude |
| 4 | B | input | Inverting LVDS receiver input, with input voltage range 0 to VCC - 0.8 V and differential input magnitude |
| 5 | R | output | LVTTL receiver output, with VOH minimum 2.4 V at VCC = 3 V (1.9 V at 2.4 V to 3.0 V supply), VOL maximum 0.4 V at IOL = 8 mA, and absolute maximum output current of ±12 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Interface |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 4 | V | 4 | ||
| Input voltage range (A or B) | VI | -0.5 | 4 | V | A or B | 4 | |
| Differential input voltage magnitude | /VID/ | 1 | V | SN65LVDT2 only | 4 | ||
| Receiver output current | IO | -12 | 12 | mA | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 2.4 | 3.3 | 3.6 | V | 4 | |
| High-level input voltage | VIH | 2 | 5 | V | 4 | ||
| Low-level input voltage | VIL | 0 | 0.8 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Magnitude of differential input voltage | /VID/ | 0.1 | 0.6 | V | 4 | ||
| Input voltage (any combination of input or common-mode voltage) | 0 | V | any combination of input or common-mode voltage; printed maximum is VCC, 0.8 V | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 322.6 | °C/W | DBV (5 PINS) package | 5 | ||
| Power rating | 385 | mW | DBV (5 PINS), TA ≤ 25°C | 5 | |||
| Power rating | 200 | mW | DBV (5 PINS), TA ≤ 85°C | 5 | |||
| Positive-going differential input voltage threshold | VITH+ | 100 | mV | See Figure 7-3 | 6 | ||
| Negative-going differential input voltage threshold | VITH- | -100 | mV | See Figure 7-3 | 6 | ||
| High-level output voltage | VOH | 1.9 | V | IOH = -8 mA, VCC = 2.4 V | 6 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -8 mA, VCC = 3 V | 6 | ||
| Low-level output voltage | VOL | 0.25 | 0.4 | V | IOL = 8 mA | 6 | |
| Supply current | ICC | 4 | 7 | mA | No load, Steady state | 6 | |
| Input current (A or B inputs), LVDT2 | II | -40 | -4 | μA | LVDT2: VI = 0 V, other input open | 6 | |
| Input current (A or B inputs), LVDT2 | II | -6 | -2.4 | μA | LVDT2: VI = 2.2 V, other input open, VCC = 3.0 V | 6 | |
| Power-off input current (A or B inputs), LVDT2 | II(OFF) | 40 | μA | LVDT2: VCC = 0 V, VIA = VIB = 2.4 V | 6 | ||
| Differential input resistance | RT | 90 | 111 | 132 | Ω | VIA = 2.4 V, VIB = 2.2 V | 6 |
| Propagation delay time, low-to-high-level output (receiver) | tPLH | 1.4 | 2.6 | 3.6 | ns | CL = 10 pF, See Figure 7-6 | 7 |
| Propagation delay time, high-to-low-level output (receiver) | tPHL | 1.4 | 2.5 | 3.6 | ns | CL = 10 pF, See Figure 7-6 | 7 |
| Pulse skew (/tpHL, tpLH/) | tsk(p) | 0.1 | 0.6 | ns | 7 | ||
| Output signal rise time | tr | 0.8 | 1.4 | ns | 7 | ||
| Output signal fall time | tf | 0.8 | 1.4 | ns | 7 | ||
| Output slew rate (rising) | tr(slew) | 2.2 | 3 | 5.5 | V/ns | CL = 10 pF, VCC = 3.0 V, 3.6 V | 7 |
| Output slew rate (rising) | tr(slew) | 1.5 | 1.9 | 2.9 | V/ns | CL = 10 pF, VCC = 2.4 V, 2.7 V | 7 |
| Output slew rate (falling) | tf(slew) | 2.7 | 3.8 | 6 | V/ns | CL = 10 pF, VCC = 3.0 V, 3.6 V | 7 |
| Output slew rate (falling) | tf(slew) | 2.1 | 2.3 | 3.9 | V/ns | CL = 10 pF, VCC = 2.4 V, 2.7 V | 7 |
CAD (KiCad official)
- Symbol:
SN65LVDT2DBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sn65lvdt2dbvt-etched.step/sn65lvdt2dbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvdt2dbvt.step/sn65lvdt2dbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
2830b1f2b732d16f, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).