Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN65LVDT2DBVT

Texas Instruments · LVDS ICs · SOT-23-5

SN65LVDT2DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage for the receiver, which operates from 2.4 V to 3.6 V (recommended VCC range 2.4 V to 3.6 V).
2 GND power_in Ground; all voltages are referenced to the network ground terminal.
3 A input Non-inverting LVDS receiver input, with input voltage range 0 to VCC - 0.8 V and differential input magnitude
4 B input Inverting LVDS receiver input, with input voltage range 0 to VCC - 0.8 V and differential input magnitude
5 R output LVTTL receiver output, with VOH minimum 2.4 V at VCC = 3 V (1.9 V at 2.4 V to 3.0 V supply), VOL maximum 0.4 V at IOL = 8 mA, and absolute maximum output current of ±12 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Interface
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.5 4 V 4
Input voltage range (A or B) VI -0.5 4 V A or B 4
Differential input voltage magnitude /VID/ 1 V SN65LVDT2 only 4
Receiver output current IO -12 12 mA 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCC 2.4 3.3 3.6 V 4
High-level input voltage VIH 2 5 V 4
Low-level input voltage VIL 0 0.8 V 4
Operating free-air temperature TA -40 85 °C 4
Magnitude of differential input voltage /VID/ 0.1 0.6 V 4
Input voltage (any combination of input or common-mode voltage) 0 V any combination of input or common-mode voltage; printed maximum is VCC, 0.8 V 4
Junction-to-ambient thermal resistance RθJA 322.6 °C/W DBV (5 PINS) package 5
Power rating 385 mW DBV (5 PINS), TA ≤ 25°C 5
Power rating 200 mW DBV (5 PINS), TA ≤ 85°C 5
Positive-going differential input voltage threshold VITH+ 100 mV See Figure 7-3 6
Negative-going differential input voltage threshold VITH- -100 mV See Figure 7-3 6
High-level output voltage VOH 1.9 V IOH = -8 mA, VCC = 2.4 V 6
High-level output voltage VOH 2.4 V IOH = -8 mA, VCC = 3 V 6
Low-level output voltage VOL 0.25 0.4 V IOL = 8 mA 6
Supply current ICC 4 7 mA No load, Steady state 6
Input current (A or B inputs), LVDT2 II -40 -4 μA LVDT2: VI = 0 V, other input open 6
Input current (A or B inputs), LVDT2 II -6 -2.4 μA LVDT2: VI = 2.2 V, other input open, VCC = 3.0 V 6
Power-off input current (A or B inputs), LVDT2 II(OFF) 40 μA LVDT2: VCC = 0 V, VIA = VIB = 2.4 V 6
Differential input resistance RT 90 111 132 Ω VIA = 2.4 V, VIB = 2.2 V 6
Propagation delay time, low-to-high-level output (receiver) tPLH 1.4 2.6 3.6 ns CL = 10 pF, See Figure 7-6 7
Propagation delay time, high-to-low-level output (receiver) tPHL 1.4 2.5 3.6 ns CL = 10 pF, See Figure 7-6 7
Pulse skew (/tpHL, tpLH/) tsk(p) 0.1 0.6 ns 7
Output signal rise time tr 0.8 1.4 ns 7
Output signal fall time tf 0.8 1.4 ns 7
Output slew rate (rising) tr(slew) 2.2 3 5.5 V/ns CL = 10 pF, VCC = 3.0 V, 3.6 V 7
Output slew rate (rising) tr(slew) 1.5 1.9 2.9 V/ns CL = 10 pF, VCC = 2.4 V, 2.7 V 7
Output slew rate (falling) tf(slew) 2.7 3.8 6 V/ns CL = 10 pF, VCC = 3.0 V, 3.6 V 7
Output slew rate (falling) tf(slew) 2.1 2.3 3.9 V/ns CL = 10 pF, VCC = 2.4 V, 2.7 V 7

CAD (KiCad official)

  • Symbol: SN65LVDT2DBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sn65lvdt2dbvt-etched.step / sn65lvdt2dbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65lvdt2dbvt.step / sn65lvdt2dbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 2830b1f2b732d16f, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF