component
SN65LVDS9638DGKR
Public Made by Adomby adom
Texas Instruments LVDS ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN65LVDS9638DGKR
Texas Instruments · LVDS ICs · MSOP-8
SN65LVDS9638DGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage, recommended operating range 3.0 V to 3.6 V. |
| 2 | 1A | input | LVTTL input signal for channel 1; high-level input voltage minimum 2 V, low-level maximum 0.8 V. |
| 3 | 2A | input | LVTTL input signal for channel 2; high-level input voltage minimum 2 V, low-level maximum 0.8 V. |
| 4 | GND | power_in | Ground reference. |
| 5 | 2Z | output | Differential LVDS inverting output for channel 2; typical 350 mV differential output voltage into 100-Ω load. |
| 6 | 2Y | output | Differential LVDS non-inverting output for channel 2; typical 350 mV differential output voltage into 100-Ω load. |
| 7 | 1Z | output | Differential LVDS inverting output for channel 1; typical 350 mV differential output voltage into 100-Ω load. |
| 8 | 1Y | output | Differential LVDS non-inverting output for channel 1; typical 350 mV differential output voltage into 100-Ω load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SN65LVDS9638DGKR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
sn65lvds9638dgkr-etched.step/sn65lvds9638dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvds9638dgkr.step/sn65lvds9638dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (57 pp, sha256
7f0f885ccc1adfad, retrieved 2026-10-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).