main
Ray
Publish 0.1.0
150f708
SN65LVDS051PW
Texas Instruments · LVDS ICs · TSSOP-16
SN65LVDS051PW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Differential (LVDS) inverting receiver input; the receiver output goes low when VID ≤ -100 mV and high when VID ≥ 100 mV. |
| 2 | 1A | input | Differential (LVDS) non-inverting receiver input; the receiver output goes high when VID ≥ 100 mV and low when VID ≤ -100 mV. |
| 3 | 1R | output | LVTTL receiver output; VOH is at least 2.4 V at IOH = -8 mA and VOL is at most 0.4 V at IOL = 8 mA. |
| 4 | 1DE | input | Driver 1 enable; the 1Y/1Z outputs are off when this input is low. |
| 5 | 2R | output | LVTTL receiver output; VOH is at least 2.4 V at IOH = -8 mA and VOL is at most 0.4 V at IOL = 8 mA. |
| 6 | 2A | input | Differential (LVDS) non-inverting receiver input; the receiver output goes high when VID ≥ 100 mV and low when VID ≤ -100 mV. |
| 7 | 2B | input | Differential (LVDS) inverting receiver input; the receiver output goes low when VID ≤ -100 mV and high when VID ≥ 100 mV. |
| 8 | GND | power_in | Ground reference; the datasheet allows up to ±1 V ground potential difference between driver and receiver. |
| 9 | 2D | input | LVTTL driver 2 input; VIH is at least 2 V and VIL is at most 0.8 V, and the input tolerates up to 5 V. |
| 10 | 2Y | output | Differential (LVDS) non-inverting driver 2 output; VOD is 247 mV to 454 mV into a 100-Ω load. |
| 11 | 2Z | output | Differential (LVDS) inverting driver 2 output; VOD is 247 mV to 454 mV into a 100-Ω load. |
| 12 | 2DE | input | Driver 2 enable; the 2Y/2Z outputs are off when this input is low. |
| 13 | 1Z | output | Differential (LVDS) inverting driver 1 output; VOD is 247 mV to 454 mV into a 100-Ω load. |
| 14 | 1Y | output | Differential (LVDS) non-inverting driver 1 output; VOD is 247 mV to 454 mV into a 100-Ω load. |
| 15 | 1D | input | LVTTL driver 1 input; VIH is at least 2 V and VIL is at most 0.8 V, and the input tolerates up to 5 V. |
| 16 | VCC | power_in | Supply voltage of 3 V to 3.6 V (3.3 V nominal); the absolute maximum rating is 4 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VCC) | VCC | 3 | 3.3 | 3.6 | V | 7 | |
| High-level input voltage | VIH | 2 | V | 7 | |||
| Low-level input voltage | VIL | 0.8 | V | 7 | |||
| Magnitude of differential input voltage | /VID/ | 0.05 | 0.6 | V | 7 | ||
| Magnitude of differential output voltage with disabled driver | /VOD(dis)/ | 520 | mV | 7 | |||
| Driver output voltage | VOY or VOZ | 0 | 2.4 | V | 7 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 7 | ||
| Supply voltage range | VCC | -0.5 | 4 | V | 6 | ||
| Voltage range, D, R, DE, RE | -0.5 | 6 | V | 6 | |||
| Voltage range, Y, Z, A, and B | -0.5 | 4 | V | 6 | |||
| Differential output voltage | /VOD/ | 1 | V | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Power rating (PW, 16 pins) | 839 | mW | TA ≤ 25°C | 7 | |||
| Power rating (PW, 16 pins) | 437 | mW | TA = 85°C | 7 | |||
| Supply current, drivers enabled | ICC | 12 | 20 | mA | Drivers enabled, no receiver loads, driver RL = 100 Ω | 7 | |
| Supply current, drivers disabled | ICC | 3 | 6 | mA | Drivers disabled, no loads | 7 | |
| Differential output voltage magnitude | /VOD/ | 247 | 340 | 454 | mV | RL = 100 Ω, See Figure 11 and Figure 12 | 8 |
| Change in differential output voltage magnitude between logic states | Δ/VOD/ | -50 | 50 | mV | 8 | ||
| Steady-state common-mode output voltage | VOC(SS) | 1.125 | 1.2 | 1.375 | V | See Figure 12 | 8 |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | 50 | mV | 8 | ||
| Peak-to-peak common-mode output voltage | VOC(PP) | 50 | 150 | mV | 8 | ||
| High-level input current, DE | IIH | -0.5 | -20 | µA | VIH = 5 V | 8 | |
| High-level input current, D | IIH | 2 | 20 | µA | VIH = 5 V | 8 | |
| Low-level input current, DE | IIL | -0.5 | -10 | µA | VIL = 0.8 V | 8 | |
| Low-level input current, D | IIL | 2 | 10 | µA | VIL = 0.8 V | 8 | |
| Short-circuit output current | IOS | 3 | 10 | mA | VOY or VOZ = 0 V | 8 | |
| Off-state output current | IO(OFF) | -1 | 1 | µA | DE = 0 V, VOY = VOZ = 0 V | 8 | |
| Positive-going differential input voltage threshold | VIT+ | 100 | mV | See Figure 14 and Table 2 | 8 | ||
| Negative-going differential input voltage threshold | VIT- | -100 | mV | See Figure 14 and Table 2 | 8 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -8 mA | 8 | ||
| High-level output voltage | VOH | 2.8 | V | IOH = -4 mA | 8 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 8 mA | 8 | ||
| Input current (A or B input) | II | -2 | -11 | -20 | µA | VI = 0 V | 8 |
| Input current (A or B input) | II | -1.2 | -3 | µA | VI = 2.4 V | 8 | |
| Power-off input current (A or B input) | II(OFF) | -20 | 20 | µA | VCC = 0 V | 8 | |
| High-level input current (enables) | IIH | -10 | 10 | µA | VIH = 5 V | 8 | |
| Low-level input current (enables) | IIL | -10 | 10 | µA | VIL = 0.8 V | 8 | |
| High-impedance output current | IOZ | -10 | 10 | µA | VO = 0 or 5 V | 8 | |
| Propagation delay time, low-to-high-level output (driver) | tPLH | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 11 | 9 | |
| Propagation delay time, high-to-low-level output (driver) | tPHL | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 11 | 9 | |
| Differential output signal rise time | tr | 0.8 | 1 | ns | 9 | ||
| Differential output signal fall time | tf | 0.8 | 1 | ns | 9 | ||
| Pulse skew (/tpHL, tpLH/) | tsk(p) | 300 | ps | 9 | |||
| Channel-to-channel output skew | tsk(o) | 150 | ps | 9 | |||
| Enable time | ten | 4.3 | 10 | ns | See Figure 13 | 9 | |
| Disable time | tdis | 3.1 | 10 | ns | 9 | ||
| Propagation delay time, low-to-high-level output (receiver) | tPLH | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 15 | 9 | |
| Propagation delay time, high-to-low-level output (receiver) | tPHL | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 15 | 9 | |
| Pulse skew (/tpHL, tpLH/) (receiver) | tsk(p) | 0.3 | ns | 9 | |||
| Output signal rise time (receiver) | tr | 0.7 | 1.5 | ns | 9 | ||
| Output signal fall time (receiver) | tf | 0.9 | 1.5 | ns | 9 | ||
| Propagation delay time, high-impedance-to-high-level output | tPZH | 2.5 | ns | See Figure 16 | 9 | ||
| Propagation delay time, high-impedance-to-low-level output | tPZL | 2.5 | ns | 9 | |||
| Propagation delay time, high-level-to-high-impedance output | tPHZ | 7 | ns | 9 | |||
| Propagation delay time, low-level-to-high-impedance output | tPLZ | 4 | ns | 9 | |||
| Derating factor above TA = 25°C | 6.7 | mW/°C | 7 | ||||
| Input capacitance (driver) | CIN | 3 | pF | 8 | |||
| Input capacitance (receiver) | CI | 5 | pF | 8 |
CAD (KiCad official)
- Symbol:
SN65LVDS051PW - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
sn65lvds051pw-etched.step/sn65lvds051pw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvds051pw.step/sn65lvds051pw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
69be50e0c02c6e8a, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN65LVDS051PW
**Texas Instruments** · LVDS ICs · TSSOP-16
SN65LVDS051PW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Differential (LVDS) inverting receiver input; the receiver output goes low when VID ≤ -100 mV and high when VID ≥ 100 mV. |
| 2 | 1A | input | Differential (LVDS) non-inverting receiver input; the receiver output goes high when VID ≥ 100 mV and low when VID ≤ -100 mV. |
| 3 | 1R | output | LVTTL receiver output; VOH is at least 2.4 V at IOH = -8 mA and VOL is at most 0.4 V at IOL = 8 mA. |
| 4 | 1DE | input | Driver 1 enable; the 1Y/1Z outputs are off when this input is low. |
| 5 | 2R | output | LVTTL receiver output; VOH is at least 2.4 V at IOH = -8 mA and VOL is at most 0.4 V at IOL = 8 mA. |
| 6 | 2A | input | Differential (LVDS) non-inverting receiver input; the receiver output goes high when VID ≥ 100 mV and low when VID ≤ -100 mV. |
| 7 | 2B | input | Differential (LVDS) inverting receiver input; the receiver output goes low when VID ≤ -100 mV and high when VID ≥ 100 mV. |
| 8 | GND | power_in | Ground reference; the datasheet allows up to ±1 V ground potential difference between driver and receiver. |
| 9 | 2D | input | LVTTL driver 2 input; VIH is at least 2 V and VIL is at most 0.8 V, and the input tolerates up to 5 V. |
| 10 | 2Y | output | Differential (LVDS) non-inverting driver 2 output; VOD is 247 mV to 454 mV into a 100-Ω load. |
| 11 | 2Z | output | Differential (LVDS) inverting driver 2 output; VOD is 247 mV to 454 mV into a 100-Ω load. |
| 12 | 2DE | input | Driver 2 enable; the 2Y/2Z outputs are off when this input is low. |
| 13 | 1Z | output | Differential (LVDS) inverting driver 1 output; VOD is 247 mV to 454 mV into a 100-Ω load. |
| 14 | 1Y | output | Differential (LVDS) non-inverting driver 1 output; VOD is 247 mV to 454 mV into a 100-Ω load. |
| 15 | 1D | input | LVTTL driver 1 input; VIH is at least 2 V and VIL is at most 0.8 V, and the input tolerates up to 5 V. |
| 16 | VCC | power_in | Supply voltage of 3 V to 3.6 V (3.3 V nominal); the absolute maximum rating is 4 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VCC) | VCC | 3 | 3.3 | 3.6 | V | | 7 |
| High-level input voltage | VIH | 2 | | | V | | 7 |
| Low-level input voltage | VIL | | | 0.8 | V | | 7 |
| Magnitude of differential input voltage | /VID/ | 0.05 | | 0.6 | V | | 7 |
| Magnitude of differential output voltage with disabled driver | /VOD(dis)/ | | | 520 | mV | | 7 |
| Driver output voltage | VOY or VOZ | 0 | | 2.4 | V | | 7 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 7 |
| Supply voltage range | VCC | -0.5 | | 4 | V | | 6 |
| Voltage range, D, R, DE, RE | | -0.5 | | 6 | V | | 6 |
| Voltage range, Y, Z, A, and B | | -0.5 | | 4 | V | | 6 |
| Differential output voltage | /VOD/ | | | 1 | V | | 6 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 6 |
| Power rating (PW, 16 pins) | | | | 839 | mW | TA ≤ 25°C | 7 |
| Power rating (PW, 16 pins) | | | | 437 | mW | TA = 85°C | 7 |
| Supply current, drivers enabled | ICC | | 12 | 20 | mA | Drivers enabled, no receiver loads, driver RL = 100 Ω | 7 |
| Supply current, drivers disabled | ICC | | 3 | 6 | mA | Drivers disabled, no loads | 7 |
| Differential output voltage magnitude | /VOD/ | 247 | 340 | 454 | mV | RL = 100 Ω, See Figure 11 and Figure 12 | 8 |
| Change in differential output voltage magnitude between logic states | Δ/VOD/ | -50 | | 50 | mV | | 8 |
| Steady-state common-mode output voltage | VOC(SS) | 1.125 | 1.2 | 1.375 | V | See Figure 12 | 8 |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | | 50 | mV | | 8 |
| Peak-to-peak common-mode output voltage | VOC(PP) | | 50 | 150 | mV | | 8 |
| High-level input current, DE | IIH | -0.5 | | -20 | µA | VIH = 5 V | 8 |
| High-level input current, D | IIH | 2 | | 20 | µA | VIH = 5 V | 8 |
| Low-level input current, DE | IIL | -0.5 | | -10 | µA | VIL = 0.8 V | 8 |
| Low-level input current, D | IIL | 2 | | 10 | µA | VIL = 0.8 V | 8 |
| Short-circuit output current | IOS | 3 | | 10 | mA | VOY or VOZ = 0 V | 8 |
| Off-state output current | IO(OFF) | -1 | | 1 | µA | DE = 0 V, VOY = VOZ = 0 V | 8 |
| Positive-going differential input voltage threshold | VIT+ | | | 100 | mV | See Figure 14 and Table 2 | 8 |
| Negative-going differential input voltage threshold | VIT- | -100 | | | mV | See Figure 14 and Table 2 | 8 |
| High-level output voltage | VOH | 2.4 | | | V | IOH = -8 mA | 8 |
| High-level output voltage | VOH | 2.8 | | | V | IOH = -4 mA | 8 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = 8 mA | 8 |
| Input current (A or B input) | II | -2 | -11 | -20 | µA | VI = 0 V | 8 |
| Input current (A or B input) | II | -1.2 | | -3 | µA | VI = 2.4 V | 8 |
| Power-off input current (A or B input) | II(OFF) | -20 | | 20 | µA | VCC = 0 V | 8 |
| High-level input current (enables) | IIH | -10 | | 10 | µA | VIH = 5 V | 8 |
| Low-level input current (enables) | IIL | -10 | | 10 | µA | VIL = 0.8 V | 8 |
| High-impedance output current | IOZ | -10 | | 10 | µA | VO = 0 or 5 V | 8 |
| Propagation delay time, low-to-high-level output (driver) | tPLH | | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 11 | 9 |
| Propagation delay time, high-to-low-level output (driver) | tPHL | | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 11 | 9 |
| Differential output signal rise time | tr | | 0.8 | 1 | ns | | 9 |
| Differential output signal fall time | tf | | 0.8 | 1 | ns | | 9 |
| Pulse skew (/tpHL, tpLH/) | tsk(p) | | | 300 | ps | | 9 |
| Channel-to-channel output skew | tsk(o) | | | 150 | ps | | 9 |
| Enable time | ten | | 4.3 | 10 | ns | See Figure 13 | 9 |
| Disable time | tdis | | 3.1 | 10 | ns | | 9 |
| Propagation delay time, low-to-high-level output (receiver) | tPLH | | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 15 | 9 |
| Propagation delay time, high-to-low-level output (receiver) | tPHL | | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 15 | 9 |
| Pulse skew (/tpHL, tpLH/) (receiver) | tsk(p) | | | 0.3 | ns | | 9 |
| Output signal rise time (receiver) | tr | | 0.7 | 1.5 | ns | | 9 |
| Output signal fall time (receiver) | tf | | 0.9 | 1.5 | ns | | 9 |
| Propagation delay time, high-impedance-to-high-level output | tPZH | | 2.5 | | ns | See Figure 16 | 9 |
| Propagation delay time, high-impedance-to-low-level output | tPZL | | 2.5 | | ns | | 9 |
| Propagation delay time, high-level-to-high-impedance output | tPHZ | | 7 | | ns | | 9 |
| Propagation delay time, low-level-to-high-impedance output | tPLZ | | 4 | | ns | | 9 |
| Derating factor above TA = 25°C | | | 6.7 | | mW/°C | | 7 |
| Input capacitance (driver) | CIN | | 3 | | pF | | 8 |
| Input capacitance (receiver) | CI | | 5 | | pF | | 8 |
## CAD (KiCad official)
- Symbol: `SN65LVDS051PW`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `sn65lvds051pw-etched.step` / `sn65lvds051pw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65lvds051pw.step` / `sn65lvds051pw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn65lvds051.pdf) (56 pp, sha256 `69be50e0c02c6e8a`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn65lvds051pw-datasheet.pdf)