Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN65LVDS051PW

Texas Instruments · LVDS ICs · TSSOP-16

SN65LVDS051PW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1B input Differential (LVDS) inverting receiver input; the receiver output goes low when VID ≤ -100 mV and high when VID ≥ 100 mV.
2 1A input Differential (LVDS) non-inverting receiver input; the receiver output goes high when VID ≥ 100 mV and low when VID ≤ -100 mV.
3 1R output LVTTL receiver output; VOH is at least 2.4 V at IOH = -8 mA and VOL is at most 0.4 V at IOL = 8 mA.
4 1DE input Driver 1 enable; the 1Y/1Z outputs are off when this input is low.
5 2R output LVTTL receiver output; VOH is at least 2.4 V at IOH = -8 mA and VOL is at most 0.4 V at IOL = 8 mA.
6 2A input Differential (LVDS) non-inverting receiver input; the receiver output goes high when VID ≥ 100 mV and low when VID ≤ -100 mV.
7 2B input Differential (LVDS) inverting receiver input; the receiver output goes low when VID ≤ -100 mV and high when VID ≥ 100 mV.
8 GND power_in Ground reference; the datasheet allows up to ±1 V ground potential difference between driver and receiver.
9 2D input LVTTL driver 2 input; VIH is at least 2 V and VIL is at most 0.8 V, and the input tolerates up to 5 V.
10 2Y output Differential (LVDS) non-inverting driver 2 output; VOD is 247 mV to 454 mV into a 100-Ω load.
11 2Z output Differential (LVDS) inverting driver 2 output; VOD is 247 mV to 454 mV into a 100-Ω load.
12 2DE input Driver 2 enable; the 2Y/2Z outputs are off when this input is low.
13 1Z output Differential (LVDS) inverting driver 1 output; VOD is 247 mV to 454 mV into a 100-Ω load.
14 1Y output Differential (LVDS) non-inverting driver 1 output; VOD is 247 mV to 454 mV into a 100-Ω load.
15 1D input LVTTL driver 1 input; VIH is at least 2 V and VIL is at most 0.8 V, and the input tolerates up to 5 V.
16 VCC power_in Supply voltage of 3 V to 3.6 V (3.3 V nominal); the absolute maximum rating is 4 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VCC) VCC 3 3.3 3.6 V 7
High-level input voltage VIH 2 V 7
Low-level input voltage VIL 0.8 V 7
Magnitude of differential input voltage /VID/ 0.05 0.6 V 7
Magnitude of differential output voltage with disabled driver /VOD(dis)/ 520 mV 7
Driver output voltage VOY or VOZ 0 2.4 V 7
Operating free-air temperature TA -40 85 °C 7
Supply voltage range VCC -0.5 4 V 6
Voltage range, D, R, DE, RE -0.5 6 V 6
Voltage range, Y, Z, A, and B -0.5 4 V 6
Differential output voltage /VOD/ 1 V 6
Storage temperature Tstg -65 150 °C 6
Power rating (PW, 16 pins) 839 mW TA ≤ 25°C 7
Power rating (PW, 16 pins) 437 mW TA = 85°C 7
Supply current, drivers enabled ICC 12 20 mA Drivers enabled, no receiver loads, driver RL = 100 Ω 7
Supply current, drivers disabled ICC 3 6 mA Drivers disabled, no loads 7
Differential output voltage magnitude /VOD/ 247 340 454 mV RL = 100 Ω, See Figure 11 and Figure 12 8
Change in differential output voltage magnitude between logic states Δ/VOD/ -50 50 mV 8
Steady-state common-mode output voltage VOC(SS) 1.125 1.2 1.375 V See Figure 12 8
Change in steady-state common-mode output voltage between logic states ΔVOC(SS) -50 50 mV 8
Peak-to-peak common-mode output voltage VOC(PP) 50 150 mV 8
High-level input current, DE IIH -0.5 -20 µA VIH = 5 V 8
High-level input current, D IIH 2 20 µA VIH = 5 V 8
Low-level input current, DE IIL -0.5 -10 µA VIL = 0.8 V 8
Low-level input current, D IIL 2 10 µA VIL = 0.8 V 8
Short-circuit output current IOS 3 10 mA VOY or VOZ = 0 V 8
Off-state output current IO(OFF) -1 1 µA DE = 0 V, VOY = VOZ = 0 V 8
Positive-going differential input voltage threshold VIT+ 100 mV See Figure 14 and Table 2 8
Negative-going differential input voltage threshold VIT- -100 mV See Figure 14 and Table 2 8
High-level output voltage VOH 2.4 V IOH = -8 mA 8
High-level output voltage VOH 2.8 V IOH = -4 mA 8
Low-level output voltage VOL 0.4 V IOL = 8 mA 8
Input current (A or B input) II -2 -11 -20 µA VI = 0 V 8
Input current (A or B input) II -1.2 -3 µA VI = 2.4 V 8
Power-off input current (A or B input) II(OFF) -20 20 µA VCC = 0 V 8
High-level input current (enables) IIH -10 10 µA VIH = 5 V 8
Low-level input current (enables) IIL -10 10 µA VIL = 0.8 V 8
High-impedance output current IOZ -10 10 µA VO = 0 or 5 V 8
Propagation delay time, low-to-high-level output (driver) tPLH 1.7 2.7 ns RL = 100 Ω, CL = 10 pF, See Figure 11 9
Propagation delay time, high-to-low-level output (driver) tPHL 1.7 2.7 ns RL = 100 Ω, CL = 10 pF, See Figure 11 9
Differential output signal rise time tr 0.8 1 ns 9
Differential output signal fall time tf 0.8 1 ns 9
Pulse skew (/tpHL, tpLH/) tsk(p) 300 ps 9
Channel-to-channel output skew tsk(o) 150 ps 9
Enable time ten 4.3 10 ns See Figure 13 9
Disable time tdis 3.1 10 ns 9
Propagation delay time, low-to-high-level output (receiver) tPLH 3.7 4.5 ns CL = 10 pF, See Figure 15 9
Propagation delay time, high-to-low-level output (receiver) tPHL 3.7 4.5 ns CL = 10 pF, See Figure 15 9
Pulse skew (/tpHL, tpLH/) (receiver) tsk(p) 0.3 ns 9
Output signal rise time (receiver) tr 0.7 1.5 ns 9
Output signal fall time (receiver) tf 0.9 1.5 ns 9
Propagation delay time, high-impedance-to-high-level output tPZH 2.5 ns See Figure 16 9
Propagation delay time, high-impedance-to-low-level output tPZL 2.5 ns 9
Propagation delay time, high-level-to-high-impedance output tPHZ 7 ns 9
Propagation delay time, low-level-to-high-impedance output tPLZ 4 ns 9
Derating factor above TA = 25°C 6.7 mW/°C 7
Input capacitance (driver) CIN 3 pF 8
Input capacitance (receiver) CI 5 pF 8

CAD (KiCad official)

  • Symbol: SN65LVDS051PW
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: sn65lvds051pw-etched.step / sn65lvds051pw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65lvds051pw.step / sn65lvds051pw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 69be50e0c02c6e8a, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF