main
Ray
Publish 0.1.0
a78f3f3
SN65LVDM050QDRQ1
Texas Instruments · LVDS ICs · SOIC-16
SN65LVDM050QDRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Receiver differential input B; the receiver detects VID = VA − VB thresholds of ±50 mV with up to 1 V of ground potential difference between transmitter and receiver. |
| 2 | 1A | input | Receiver differential input A; with an open input the fail-safe pulls it toward VCC through 300 kΩ so the receiver output goes high regardless of VID. |
| 3 | 1R | output | Receiver output with VOH of at least 2.4 V at IOH = −8 mA and VOL of at most 0.4 V at IOL = 8 mA, high impedance when RE is high. |
| 4 | RE | input | Receiver enable (active low per the receiver function table): R is high impedance when RE is high, with a high-level input of at least 2 V. |
| 5 | 2R | output | Receiver output for channel 2 with VOH of at least 2.4 V at IOH = −8 mA and VOL of at most 0.4 V at IOL = 8 mA, high impedance when RE is high. |
| 6 | 2A | input | Receiver differential input A for channel 2; open-circuit fail-safe pulls it toward VCC through 300 kΩ. |
| 7 | 2B | input | Receiver differential input B for channel 2; detects ±50 mV thresholds with up to 1 V ground potential difference. |
| 8 | GND | power_in | Network ground terminal; all voltages except differential I/O bus voltages are referenced to this pin, with absolute-maximum notes applying. |
| 9 | 2D | input | Driver input for channel 2; LVTTL input levels that are 5 V tolerant. |
| 10 | 2Y | output | Driver non-inverting LVDS output for channel 2, providing a differential output magnitude of at least 247 mV across a 50 Ω load and high impedance when disabled. |
| 11 | 2Z | output | Driver inverting LVDS output for channel 2, complementary to 2Y and high impedance when the driver is disabled. |
| 12 | DE | input | Driver enable shared by both channels in the SN65LVDM050: drivers are high impedance when DE is low, and the driver is high impedance when VCC is below 1.5 V. |
| 13 | 1Z | output | Driver inverting LVDS output for channel 1, complementary to 1Y and high impedance when the driver is disabled. |
| 14 | 1Y | output | Driver non-inverting LVDS output for channel 1, providing a differential output magnitude of at least 247 mV across a 50 Ω load and high impedance when disabled. |
| 15 | 1D | input | Driver input for channel 1; LVTTL input levels that are 5 V tolerant. |
| 16 | VCC | power_in | Single 3.3 V supply with a recommended range of 3 V to 3.6 V and an absolute maximum of 4 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN65LVDM050QDRQ1 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sn65lvdm050qdrq1-etched.step/sn65lvdm050qdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvdm050qdrq1.step/sn65lvdm050qdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
bbb259bd55ba22b0, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN65LVDM050QDRQ1
**Texas Instruments** · LVDS ICs · SOIC-16
SN65LVDM050QDRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Receiver differential input B; the receiver detects VID = VA − VB thresholds of ±50 mV with up to 1 V of ground potential difference between transmitter and receiver. |
| 2 | 1A | input | Receiver differential input A; with an open input the fail-safe pulls it toward VCC through 300 kΩ so the receiver output goes high regardless of VID. |
| 3 | 1R | output | Receiver output with VOH of at least 2.4 V at IOH = −8 mA and VOL of at most 0.4 V at IOL = 8 mA, high impedance when RE is high. |
| 4 | RE | input | Receiver enable (active low per the receiver function table): R is high impedance when RE is high, with a high-level input of at least 2 V. |
| 5 | 2R | output | Receiver output for channel 2 with VOH of at least 2.4 V at IOH = −8 mA and VOL of at most 0.4 V at IOL = 8 mA, high impedance when RE is high. |
| 6 | 2A | input | Receiver differential input A for channel 2; open-circuit fail-safe pulls it toward VCC through 300 kΩ. |
| 7 | 2B | input | Receiver differential input B for channel 2; detects ±50 mV thresholds with up to 1 V ground potential difference. |
| 8 | GND | power_in | Network ground terminal; all voltages except differential I/O bus voltages are referenced to this pin, with absolute-maximum notes applying. |
| 9 | 2D | input | Driver input for channel 2; LVTTL input levels that are 5 V tolerant. |
| 10 | 2Y | output | Driver non-inverting LVDS output for channel 2, providing a differential output magnitude of at least 247 mV across a 50 Ω load and high impedance when disabled. |
| 11 | 2Z | output | Driver inverting LVDS output for channel 2, complementary to 2Y and high impedance when the driver is disabled. |
| 12 | DE | input | Driver enable shared by both channels in the SN65LVDM050: drivers are high impedance when DE is low, and the driver is high impedance when VCC is below 1.5 V. |
| 13 | 1Z | output | Driver inverting LVDS output for channel 1, complementary to 1Y and high impedance when the driver is disabled. |
| 14 | 1Y | output | Driver non-inverting LVDS output for channel 1, providing a differential output magnitude of at least 247 mV across a 50 Ω load and high impedance when disabled. |
| 15 | 1D | input | Driver input for channel 1; LVTTL input levels that are 5 V tolerant. |
| 16 | VCC | power_in | Single 3.3 V supply with a recommended range of 3 V to 3.6 V and an absolute maximum of 4 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `SN65LVDM050QDRQ1`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `sn65lvdm050qdrq1-etched.step` / `sn65lvdm050qdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65lvdm050qdrq1.step` / `sn65lvdm050qdrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn65lvdm051-q1) (24 pp, sha256 `bbb259bd55ba22b0`, retrieved 2026-10-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn65lvdm050qdrq1-datasheet.pdf)