Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN65LVDM050QDRQ1

Texas Instruments · LVDS ICs · SOIC-16

SN65LVDM050QDRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1B input Receiver differential input B; the receiver detects VID = VA − VB thresholds of ±50 mV with up to 1 V of ground potential difference between transmitter and receiver.
2 1A input Receiver differential input A; with an open input the fail-safe pulls it toward VCC through 300 kΩ so the receiver output goes high regardless of VID.
3 1R output Receiver output with VOH of at least 2.4 V at IOH = −8 mA and VOL of at most 0.4 V at IOL = 8 mA, high impedance when RE is high.
4 RE input Receiver enable (active low per the receiver function table): R is high impedance when RE is high, with a high-level input of at least 2 V.
5 2R output Receiver output for channel 2 with VOH of at least 2.4 V at IOH = −8 mA and VOL of at most 0.4 V at IOL = 8 mA, high impedance when RE is high.
6 2A input Receiver differential input A for channel 2; open-circuit fail-safe pulls it toward VCC through 300 kΩ.
7 2B input Receiver differential input B for channel 2; detects ±50 mV thresholds with up to 1 V ground potential difference.
8 GND power_in Network ground terminal; all voltages except differential I/O bus voltages are referenced to this pin, with absolute-maximum notes applying.
9 2D input Driver input for channel 2; LVTTL input levels that are 5 V tolerant.
10 2Y output Driver non-inverting LVDS output for channel 2, providing a differential output magnitude of at least 247 mV across a 50 Ω load and high impedance when disabled.
11 2Z output Driver inverting LVDS output for channel 2, complementary to 2Y and high impedance when the driver is disabled.
12 DE input Driver enable shared by both channels in the SN65LVDM050: drivers are high impedance when DE is low, and the driver is high impedance when VCC is below 1.5 V.
13 1Z output Driver inverting LVDS output for channel 1, complementary to 1Y and high impedance when the driver is disabled.
14 1Y output Driver non-inverting LVDS output for channel 1, providing a differential output magnitude of at least 247 mV across a 50 Ω load and high impedance when disabled.
15 1D input Driver input for channel 1; LVTTL input levels that are 5 V tolerant.
16 VCC power_in Single 3.3 V supply with a recommended range of 3 V to 3.6 V and an absolute maximum of 4 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16
Category Interface
Pins 16

CAD (KiCad official)

  • Symbol: SN65LVDM050QDRQ1
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: sn65lvdm050qdrq1-etched.step / sn65lvdm050qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65lvdm050qdrq1.step / sn65lvdm050qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 bbb259bd55ba22b0, retrieved 2026-10-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF